The '67 Burb Build Thread - Page 29 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*project 67 sub* · 09-28-2012, 02:46 AM

thanks. and well, the easiest thing to do and what we did. was we basically just cut out the old one to get to the rivets on top... only thing wrong with this set up is it hits the floor so you are going to need to do some massaging of the floor area above it (can be seen in 1st and 2nd pic) we just used a trans jack to push up the floor to get it in their

i will eventually do something for more clearance, if new body bushings wont fix the touching issue of it hitting the floor

CLTBurban · 09-28-2012, 10:09 AM

Good call on the body bushings. Mine are definitely original and TOAST. I have the Energy Suspension ones here and ready to go, so I too will be curious if this eliminates the clearance issue or not. Thanks, as always, for the help!!!

CLTBurban · 09-28-2012, 10:14 AM

Quote:

Originally Posted by project 67 sub

porterbuilt trans and trailing arm crossmember installed

Attachment 989601

Attachment 989602

Attachment 989603

Attachment 989604

Attachment 989605

By the way, I'm sure you've probably already tightened it already, but in case you haven't, heads-up on the trailing arm cross member bolt still hanging down in your first pic. Only saying since I've overlooked many bolts in years past, and since this one is in storage, didn't want to take the chance of you forgetting about it when you get started back on her.

*project 67 sub* · 09-29-2012, 01:21 AM

haha thanks, and yes ALL bolts/nuts were tightened

*project 67 sub* · 10-15-2012, 11:30 AM

Bought some more small parts for the burb yesterday.... another tach (in dash mount), a lokar auto column shift linkage, a dimmer switch hippie foot pedal to match my gas pedal, and some 3" to 2.5" tapered exhaust reducers for when i redo the exhaust on it and my other truck
Posted via Mobile Device

*project 67 sub* · 10-27-2012, 06:28 PM

bought some stuff on ebay for the burb a little bit ago...

ammo "battery" box
Name: $T2eC16JHJG!E9nm3plpbBQEEjMKwpg~~60_57.jpg
Views: 498
Size: 28.8 KB

Name: $T2eC16FHJIkE9qU3iLdcBQEEjPFwOQ~~60_57.jpg
Views: 497
Size: 31.6 KB

Name: $T2eC16dHJGkE9no8iPO!BQEEjS0(8Q~~60_57.jpg
Views: 492
Size: 44.9 KB

and an M4 rifle "hood prop"

Name: $(KGrHqN,!qUE-Y4hHTMcBPoT7pqOL!~~60_12.JPG
Views: 494
Size: 43.0 KB

*project 67 sub* · 10-28-2012, 08:16 PM

should also be pulling the trigger on some more porterbuilt parts in about another week or so, so stay tuned to here what i get lol

NewType72 · 10-29-2012, 01:53 AM

booyah! can't wait for it

blfuller123 · 10-29-2012, 07:36 AM

Quote:

Originally Posted by project 67 sub

should also be pulling the trigger on some more porterbuilt parts in about another week or so, so stay tuned to here what i get lol

Cant go wrong there

*project 67 sub* · 10-29-2012, 11:08 AM

haha nope, definitely cant

**1972BackInBlackC10** · 11-12-2012, 10:04 PM

love your burb it makes me want one just a lil bit more, but i have to stick to my guns and finish my truck lol

*project 67 sub* · 11-12-2012, 11:44 PM

Thanks, and yah i gotta do the same lol
Posted via Mobile Device

*project 67 sub* · 11-22-2012, 05:42 PM

fully functional M4 hood prop
Name: ResizedImage_1353573712104.jpg
Views: 358
Size: 24.6 KB

ammo can battery box
Name: ResizedImage_1353573725448.jpg
Views: 368
Size: 33.1 KB

Name: ResizedImage_1353573743684.jpg
Views: 360
Size: 25.1 KB

nos bumper guards
Name: ResizedImage_1353573756439.jpg
Views: 329
Size: 31.5 KB

Name: ResizedImage_1353573795223.jpg
Views: 360
Size: 25.8 KB

*project 67 sub* · 11-22-2012, 05:46 PM

Name: ResizedImage_1353573782884.jpg
Views: 360
Size: 41.4 KB

Name: ResizedImage_1353573769994.jpg
Views: 366
Size: 34.1 KB

exhaust reducers
Name: ResizedImage_1353573806878.jpg
Views: 356
Size: 36.8 KB

steel to start framing up a rear floor
Name: ResizedImage_1353573817386.jpg
Views: 365
Size: 35.1 KB

gas tank removed
Name: ResizedImage_1353573831279.jpg
Views: 363
Size: 22.5 KB

*project 67 sub* · 11-22-2012, 05:49 PM

Name: ResizedImage_1353573844521.jpg
Views: 359
Size: 25.3 KB

making the mounts for the gas tank
Name: ResizedImage_1353573863692.jpg
Views: 363
Size: 18.6 KB

Name: ResizedImage_1353573875926.jpg
Views: 359
Size: 20.7 KB

Name: ResizedImage_1353573888838.jpg
Views: 366
Size: 12.8 KB

Name: ResizedImage_1353573900340.jpg
Views: 357
Size: 19.2 KB

*project 67 sub* · 11-22-2012, 05:51 PM

Name: ResizedImage_1353573909944.jpg
Views: 368
Size: 15.2 KB

gas tank installed
Name: ResizedImage_1353573923798.jpg
Views: 370
Size: 23.6 KB

layed out in front of my sierra
Name: ResizedImage_1353617436461.jpg
Views: 367
Size: 46.1 KB

*project 67 sub* · 11-27-2012, 01:02 AM

from yesterday....
added a few extra pieces of square tube to box in the top and make it stronger
Name: ResizedImage_1353989798105.jpg
Views: 342
Size: 27.0 KB

Name: ResizedImage_1353989798105.jpg
Views: 342
Size: 27.0 KB

2.5- 1lb rolls of welding wire, 7.25- 6ft sticks of 1.25" square tube, a bunch of cutting & fitting, a bunch welding, and this how far i made it framing up a steel floor for the back of my suburban. need to get some more wire and steel when i come back home in 6-7 weeks so i can do some more of framing up of the floor lol
Name: ResizedImage_1353989812367.jpg
Views: 334
Size: 25.0 KB

Name: ResizedImage_1353989812367.jpg
Views: 334
Size: 25.0 KB

dr69burb · 11-27-2012, 10:45 AM

Looks good.
Posted via Mobile Device

CLTBurban · 11-27-2012, 11:19 AM

Wow! Looking great!!!

*project 67 sub* · 11-27-2012, 12:24 PM

Thanks guys

Posted via Mobile Device

dr69burb · 11-27-2012, 10:22 PM

Burbs lookin good. Hey your front setup? Is it cupped lowers, bags and drop spindles? Or did i miss something else. It sits nice and low. Thanks man.
Posted via Mobile Device

*project 67 sub* · 11-28-2012, 03:11 PM

Thanks. And yes its cupped lower arms and 3" drop spindles. It lays the lower control arms on the ground lol. But i have some tubular upper and lower air ride tech arms that will be going on when i get the dropmember that i will probably be pulling the trigger to purchase this week

Posted via Mobile Device

CLTBurban · 11-28-2012, 03:20 PM

Are you going with the new PB version by chance? If so, I can attest to it being AWESOME!!!

*project 67 sub* · 11-28-2012, 03:23 PM

Yes i will be going with the new version of the "extreme" dropmember

Posted via Mobile Device

dr69burb · 11-28-2012, 04:06 PM

Thanks man
Posted via Mobile Device

09-28-2012, 02:46 AM	#701
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: The '67 Burb Build Thread thanks. and well, the easiest thing to do and what we did. was we basically just cut out the old one to get to the rivets on top... only thing wrong with this set up is it hits the floor so you are going to need to do some massaging of the floor area above it (can be seen in 1st and 2nd pic) we just used a trans jack to push up the floor to get it in their i will eventually do something for more clearance, if new body bushings wont fix the touching issue of it hitting the floor

09-28-2012, 10:09 AM	#702
CLTBurban Registered User Join Date: Jul 2008 Location: Charlotte, NC Posts: 220	Re: The '67 Burb Build Thread Good call on the body bushings. Mine are definitely original and TOAST. I have the Energy Suspension ones here and ready to go, so I too will be curious if this eliminates the clearance issue or not. Thanks, as always, for the help!!! __________________ '72 GMC Suburban 1/2 Ton (Red) '68 C10 Short Fleet (OG 503 Light Green and Patina) '70 C30 Dually (OG City of Charlotte Welding Truck) Past 67-72's Chevy Trucks '68 C10 Short Fleet on 20" Coy's, '72 C20 Suburban (Ochre Big Block), '69 C20 Suburban (Silver), '69 C10 Suburban (Red/White on Boyd's), '72 C10 Short Fleet (Ochre on Torq's), '70 C10 Short Fleet (POS)

09-29-2012, 01:21 AM	#704
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: The '67 Burb Build Thread haha thanks, and yes ALL bolts/nuts were tightened

10-15-2012, 11:30 AM	#705
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: The '67 Burb Build Thread Bought some more small parts for the burb yesterday.... another tach (in dash mount), a lokar auto column shift linkage, a dimmer switch hippie foot pedal to match my gas pedal, and some 3" to 2.5" tapered exhaust reducers for when i redo the exhaust on it and my other truck Posted via Mobile Device

10-27-2012, 06:28 PM	#706
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: The '67 Burb Build Thread bought some stuff on ebay for the burb a little bit ago... ammo "battery" box and an M4 rifle "hood prop"

10-28-2012, 08:16 PM	#707
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: The '67 Burb Build Thread should also be pulling the trigger on some more porterbuilt parts in about another week or so, so stay tuned to here what i get lol

10-29-2012, 01:53 AM	#708
NewType72 Registered User Join Date: Feb 2012 Location: turlock Posts: 2,177	Re: The '67 Burb Build Thread booyah! can't wait for it __________________ Project NewType 1972 Chevy C/10 Cheyenne Super ( Daily Driven Showtruck ) http://67-72chevytrucks.com/vboard/s...d.php?t=507903 Project Great Grandpa's Legacy 1973 Chevy C/10 Cheyenne ( Current daily driver collecting big time parts ) http://67-72chevytrucks.com/vboard/s...89#post7084289 - Dylan (209)-985-7721

10-29-2012, 11:08 AM	#710
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: The '67 Burb Build Thread haha nope, definitely cant

11-12-2012, 10:04 PM	#711
1972BackInBlackC10 Senior Member Join Date: Jan 2012 Location: Estevan, Saskatchewan Posts: 1,025	Re: The '67 Burb Build Thread love your burb it makes me want one just a lil bit more, but i have to stick to my guns and finish my truck lol

11-12-2012, 11:44 PM	#712
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: The '67 Burb Build Thread Thanks, and yah i gotta do the same lol Posted via Mobile Device

11-22-2012, 05:42 PM	#713
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: The '67 Burb Build Thread fully functional M4 hood prop ammo can battery box nos bumper guards

11-22-2012, 05:46 PM	#714
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: The '67 Burb Build Thread exhaust reducers steel to start framing up a rear floor gas tank removed

11-22-2012, 05:49 PM	#715
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: The '67 Burb Build Thread making the mounts for the gas tank

11-22-2012, 05:51 PM	#716
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: The '67 Burb Build Thread gas tank installed layed out in front of my sierra

11-27-2012, 01:02 AM	#717
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: The '67 Burb Build Thread from yesterday.... added a few extra pieces of square tube to box in the top and make it stronger 2.5- 1lb rolls of welding wire, 7.25- 6ft sticks of 1.25" square tube, a bunch of cutting & fitting, a bunch welding, and this how far i made it framing up a steel floor for the back of my suburban. need to get some more wire and steel when i come back home in 6-7 weeks so i can do some more of framing up of the floor lol



Register or Log In To remove these advertisements.

11-27-2012, 10:45 AM	#718
dr69burb Registered User Join Date: Mar 2012 Location: San Diego CA Posts: 223	Re: The '67 Burb Build Thread Looks good. Posted via Mobile Device __________________ Baggin 64 lwb project http://67-72chevytrucks.com/vboard/s...d.php?t=537406

11-27-2012, 11:19 AM	#719
CLTBurban Registered User Join Date: Jul 2008 Location: Charlotte, NC Posts: 220	Re: The '67 Burb Build Thread Wow! Looking great!!! __________________ '72 GMC Suburban 1/2 Ton (Red) '68 C10 Short Fleet (OG 503 Light Green and Patina) '70 C30 Dually (OG City of Charlotte Welding Truck) Past 67-72's Chevy Trucks '68 C10 Short Fleet on 20" Coy's, '72 C20 Suburban (Ochre Big Block), '69 C20 Suburban (Silver), '69 C10 Suburban (Red/White on Boyd's), '72 C10 Short Fleet (Ochre on Torq's), '70 C10 Short Fleet (POS)

11-27-2012, 12:24 PM	#720
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: The '67 Burb Build Thread Thanks guys Posted via Mobile Device

11-27-2012, 10:22 PM	#721
dr69burb Registered User Join Date: Mar 2012 Location: San Diego CA Posts: 223	Re: The '67 Burb Build Thread Burbs lookin good. Hey your front setup? Is it cupped lowers, bags and drop spindles? Or did i miss something else. It sits nice and low. Thanks man. Posted via Mobile Device __________________ Baggin 64 lwb project http://67-72chevytrucks.com/vboard/s...d.php?t=537406

11-28-2012, 03:11 PM	#722
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: The '67 Burb Build Thread Thanks. And yes its cupped lower arms and 3" drop spindles. It lays the lower control arms on the ground lol. But i have some tubular upper and lower air ride tech arms that will be going on when i get the dropmember that i will probably be pulling the trigger to purchase this week Posted via Mobile Device

11-28-2012, 03:20 PM	#723
CLTBurban Registered User Join Date: Jul 2008 Location: Charlotte, NC Posts: 220	Re: The '67 Burb Build Thread Are you going with the new PB version by chance? If so, I can attest to it being AWESOME!!! __________________ '72 GMC Suburban 1/2 Ton (Red) '68 C10 Short Fleet (OG 503 Light Green and Patina) '70 C30 Dually (OG City of Charlotte Welding Truck) Past 67-72's Chevy Trucks '68 C10 Short Fleet on 20" Coy's, '72 C20 Suburban (Ochre Big Block), '69 C20 Suburban (Silver), '69 C10 Suburban (Red/White on Boyd's), '72 C10 Short Fleet (Ochre on Torq's), '70 C10 Short Fleet (POS)

11-28-2012, 03:23 PM	#724
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: The '67 Burb Build Thread Yes i will be going with the new version of the "extreme" dropmember Posted via Mobile Device

11-28-2012, 04:06 PM	#725
dr69burb Registered User Join Date: Mar 2012 Location: San Diego CA Posts: 223	Re: The '67 Burb Build Thread Thanks man Posted via Mobile Device __________________ Baggin 64 lwb project http://67-72chevytrucks.com/vboard/s...d.php?t=537406

Register or Log In To remove these advertisements.