72' Stepside 2 1/2 Rockwell Pond Truck - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

royo · 11-07-2008, 09:30 AM

pics x 2

Jtrux · 11-07-2008, 06:40 PM

Pics!!!!

royo · 12-24-2008, 08:12 PM

Quote:

Originally Posted by royo

pics x 2

beep beep pics

BIG HEAD · 01-21-2009, 10:54 PM

it looks like i got this picture thing figured out. so i'll post some on thursday.

BIG HEAD · 01-22-2009, 09:22 AM

a few pictures

nuke1 · 12-16-2008, 12:43 AM

that looks really good,mind me asking, but what kind of tubing did you use for your link arms? is it seamless, the reason i ask is if it is not seamless it might not be strong enough, just my opinion, especially with 600 horse and rockwells, correct me if I am wrong.

BIG HEAD · 12-23-2008, 05:08 PM

the four link bars are not seamless they are mild steel 2 x 2 3/8 thick. all the brackets are 3/8's plate. everything else is 1/8 thick ( all cross members, metal used to box frame, all of it is 1/8 ). the round ends on my bars are seamless chromemoly ( i paid like a $100.00 for 30 inches )

LuckyHenriksen · 12-24-2008, 08:38 PM

badass frame

thirdstreettito · 12-24-2008, 08:43 PM

BIG HEAD · 01-09-2009, 09:25 AM

i have about 60 new pictures but i am having trouble moving them from kodak easy share. key word (easy). any help????

BIG HEAD · 01-16-2009, 10:22 AM

i have a work party planed saturday on the cab. finishing the repairs to the cab is the biggest thing i have left to do.

msgross · 01-16-2009, 10:27 PM

Quote:

Originally Posted by BIG HEAD

i have about 60 new pictures but i am having trouble moving them from kodak easy share. key word (easy). any help????

does it require a program on your computer?

I prefer photobucket for large picture uploads...

BIG HEAD · 01-17-2009, 06:11 AM

When the pictures were put on there a year ago (hard to believe it has been that long ago) a friend of my wife was over any i asked her if she knew anything about placing pictures and she had them up in a few minutes. She did not use any other sites. I have been trying to get her over but our timing is off.

Spray-Bomb · 01-16-2009, 02:46 PM

Somebody help him get these pics uploaded !!!!!!!!!!!!!!!!!!!

BIG HEAD · 01-16-2009, 09:42 PM

Today I ran my fuel line, tranny lines, and oil cooler lines. They are all braided stainless. I CUT THEM TO LENGTH PUT THE ENDS ON THEM. TOOK THE HOSES TO THE LOCAL LUBE SHOP AND GOT ALL THE ENDS CREMPTED. CAME BACK PUT THE LINES ON AND STARTED STRAPPING THEM. THEY ARE LOOKING GREAT. TOMORROW I AM GOING TO WORK ON THE CAB. I WAS JUST NOTICING THAT IT HAS BEEN A YEAR SINCE I HAVE WORKED ON THE CAB. THAT IS PRETTY BAD, BUT I HAVE GOTTIN A LOT DONE ON THE REST OF THE TRUCK.

msgross · 01-17-2009, 08:25 AM

If there is a cable with it then just plug it into your computer... go to MY COMPUTER and you should see a camera image there.... Your pics should be hidden in there somewhere... Just copy and paste them into a folder in MY PICTURES...

BIG HEAD · 01-18-2009, 04:54 PM

YESTERDAY I WORKED ON MY CAB FOR ABOUT 4 HOURS GOT A GOOD BIT DONE. IT IS LOOKING GREAT.

Spray-Bomb · 01-22-2009, 12:18 PM

Freak'n sweet !!!

Really like the colors

**Yukon Jack** · 01-22-2009, 12:47 PM

What a beast! Wow, wow, wow!!!

**FRENCHBLUE72** · 01-22-2009, 07:58 PM

Wow man that is a sweet machine...

LOW DOUGH · 01-23-2009, 12:30 PM

WOW! Neat. Can't wait to see this one done.

BIG HEAD · 01-24-2009, 11:39 AM

On friday after lunch i cut the drip rail off my cab. I have it welded up across the front and the passenger side is almost done it looks great. And it is easier to do than i thought. For the application i think it will work out well, it will not hold the water and mud.

BIG HEAD · 01-26-2009, 02:23 PM

Some of the drip rail area rust

BIG HEAD · 01-26-2009, 02:25 PM

More of the same, cutting off drip rail

BIG HEAD · 01-26-2009, 02:28 PM

Welding drip rail. Looks good and getting rid of problem areas

11-07-2008, 09:30 AM	#1
royo Registered User Join Date: Feb 2007 Location: knoxville tn Posts: 1,013	Re: 72' Stepside 2 1/2 Rockwell Pond Truck pics x 2 __________________ nickle and dime

11-07-2008, 06:40 PM	#2
Jtrux I'm a poor spectator Join Date: Aug 2006 Location: San Antonio, Tx Posts: 2,287	Re: 72' Stepside 2 1/2 Rockwell Pond Truck Pics!!!! __________________ 2006 Jeep Unlimited IMPACT ORANGE 1993 Chevy 2500 4x4 ExCab LWB 454/NV4500 Tow rig 1977 Ford F100 2x4 LWB 1st truck I owned, still have it!!! 1979 Ford F150 4x4 SWB Built Ford Tough!!! 1971 Chevy Blazer 350 / SM465 / NP205 UNDER CONSTRUCTION Soon to have a LQ4 6.0!!!

01-21-2009, 10:54 PM	#4
BIG HEAD Registered User Join Date: Jan 2008 Location: lake city florida Posts: 327	Re: 72' Stepside 2 1/2 Rockwell Pond Truck it looks like i got this picture thing figured out. so i'll post some on thursday.

01-22-2009, 09:22 AM	#5
BIG HEAD Registered User Join Date: Jan 2008 Location: lake city florida Posts: 327	Re: 72' Stepside 2 1/2 Rockwell Pond Truck a few pictures Attached Images

12-16-2008, 12:43 AM	#6
nuke1 Registered User Join Date: Jun 2007 Location: Saskatoon, Saskatchewan,: Posts: 2,901	Re: 72' Stepside 2 1/2 Rockwell Pond Truck that looks really good,mind me asking, but what kind of tubing did you use for your link arms? is it seamless, the reason i ask is if it is not seamless it might not be strong enough, just my opinion, especially with 600 horse and rockwells, correct me if I am wrong. __________________ James 1968 GMC "HAVOC" 1986 GMC "Frank" J.J.R.H. Design & Consulting My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300 A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238 1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361 Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390 Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100 1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587

12-23-2008, 05:08 PM	#7
BIG HEAD Registered User Join Date: Jan 2008 Location: lake city florida Posts: 327	Re: 72' Stepside 2 1/2 Rockwell Pond Truck the four link bars are not seamless they are mild steel 2 x 2 3/8 thick. all the brackets are 3/8's plate. everything else is 1/8 thick ( all cross members, metal used to box frame, all of it is 1/8 ). the round ends on my bars are seamless chromemoly ( i paid like a $100.00 for 30 inches )

12-24-2008, 08:38 PM	#8
LuckyHenriksen Registered User Join Date: Oct 2007 Location: Sherwood Oregon Posts: 1,908	Re: 72' Stepside 2 1/2 Rockwell Pond Truck badass frame __________________ 1968 Yenko Chevy LWB 6.0L/TH400 3/4 Drop Senior Project Build Thread Here

12-24-2008, 08:43 PM	#9
thirdstreettito Resident of Here Join Date: May 2008 Location: Wesley Chapel, FL, USA Posts: 7,716	Re: 72' Stepside 2 1/2 Rockwell Pond Truck __________________ ~Bradley~ 2004 Black GTO LS2/T56 too much to list Miss having a truck

01-09-2009, 09:25 AM	#10
BIG HEAD Registered User Join Date: Jan 2008 Location: lake city florida Posts: 327	Re: 72' Stepside 2 1/2 Rockwell Pond Truck i have about 60 new pictures but i am having trouble moving them from kodak easy share. key word (easy). any help????

01-16-2009, 10:22 AM	#11
BIG HEAD Registered User Join Date: Jan 2008 Location: lake city florida Posts: 327	Re: 72' Stepside 2 1/2 Rockwell Pond Truck i have a work party planed saturday on the cab. finishing the repairs to the cab is the biggest thing i have left to do.

01-17-2009, 06:11 AM	#13
BIG HEAD Registered User Join Date: Jan 2008 Location: lake city florida Posts: 327	Re: 72' Stepside 2 1/2 Rockwell Pond Truck When the pictures were put on there a year ago (hard to believe it has been that long ago) a friend of my wife was over any i asked her if she knew anything about placing pictures and she had them up in a few minutes. She did not use any other sites. I have been trying to get her over but our timing is off.

01-16-2009, 02:46 PM	#14
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: 72' Stepside 2 1/2 Rockwell Pond Truck Somebody help him get these pics uploaded !!!!!!!!!!!!!!!!!!! __________________ Just not low enough... ----------------------------- Sinister Killer

01-16-2009, 09:42 PM	#15
BIG HEAD Registered User Join Date: Jan 2008 Location: lake city florida Posts: 327	Re: 72' Stepside 2 1/2 Rockwell Pond Truck Today I ran my fuel line, tranny lines, and oil cooler lines. They are all braided stainless. I CUT THEM TO LENGTH PUT THE ENDS ON THEM. TOOK THE HOSES TO THE LOCAL LUBE SHOP AND GOT ALL THE ENDS CREMPTED. CAME BACK PUT THE LINES ON AND STARTED STRAPPING THEM. THEY ARE LOOKING GREAT. TOMORROW I AM GOING TO WORK ON THE CAB. I WAS JUST NOTICING THAT IT HAS BEEN A YEAR SINCE I HAVE WORKED ON THE CAB. THAT IS PRETTY BAD, BUT I HAVE GOTTIN A LOT DONE ON THE REST OF THE TRUCK.

01-17-2009, 08:25 AM	#16
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: 72' Stepside 2 1/2 Rockwell Pond Truck If there is a cable with it then just plug it into your computer... go to MY COMPUTER and you should see a camera image there.... Your pics should be hidden in there somewhere... Just copy and paste them into a folder in MY PICTURES... __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

01-18-2009, 04:54 PM	#17
BIG HEAD Registered User Join Date: Jan 2008 Location: lake city florida Posts: 327	Re: 72' Stepside 2 1/2 Rockwell Pond Truck YESTERDAY I WORKED ON MY CAB FOR ABOUT 4 HOURS GOT A GOOD BIT DONE. IT IS LOOKING GREAT.



Register or Log In To remove these advertisements.

01-22-2009, 12:18 PM	#18
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: 72' Stepside 2 1/2 Rockwell Pond Truck Freak'n sweet !!! Really like the colors __________________ Just not low enough... ----------------------------- Sinister Killer Last edited by Spray-Bomb; 01-22-2009 at 12:19 PM.

01-22-2009, 12:47 PM	#19
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,683	Re: 72' Stepside 2 1/2 Rockwell Pond Truck What a beast! Wow, wow, wow!!! __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

01-22-2009, 07:58 PM	#20
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,590	Re: 72' Stepside 2 1/2 Rockwell Pond Truck Wow man that is a sweet machine... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

01-23-2009, 12:30 PM	#21
LOW DOUGH I'M TRUCK CRAZY! Join Date: Oct 2006 Location: Sachse, TEXAS Posts: 1,737	Re: 72' Stepside 2 1/2 Rockwell Pond Truck WOW! Neat. Can't wait to see this one done.

01-24-2009, 11:39 AM	#22
BIG HEAD Registered User Join Date: Jan 2008 Location: lake city florida Posts: 327	Re: 72' Stepside 2 1/2 Rockwell Pond Truck On friday after lunch i cut the drip rail off my cab. I have it welded up across the front and the passenger side is almost done it looks great. And it is easier to do than i thought. For the application i think it will work out well, it will not hold the water and mud.

01-26-2009, 02:23 PM	#23
BIG HEAD Registered User Join Date: Jan 2008 Location: lake city florida Posts: 327	Re: 72' Stepside 2 1/2 Rockwell Pond Truck Some of the drip rail area rust Attached Images

01-26-2009, 02:25 PM	#24
BIG HEAD Registered User Join Date: Jan 2008 Location: lake city florida Posts: 327	Re: 72' Stepside 2 1/2 Rockwell Pond Truck More of the same, cutting off drip rail Attached Images

01-26-2009, 02:28 PM	#25
BIG HEAD Registered User Join Date: Jan 2008 Location: lake city florida Posts: 327	Re: 72' Stepside 2 1/2 Rockwell Pond Truck Welding drip rail. Looks good and getting rid of problem areas Attached Images

Register or Log In To remove these advertisements.