04-10-2015, 10:20 PM | #51 |
Registered User
Join Date: Oct 2009
Location: Great White North
Posts: 1,520
|
Re: tjs 72 Blazer Build
So I decided to use 73+ front spring u-bolt plates so I could add a front sway bar down the road if I wanted. However the axle and housing on the 72 is 2.75 and 3.5" so I had to elongate slightly with an end mill and take 0.125" out of each hole.
[IMG][/IMG]
__________________
Jeff. '72 Blazer K5 "Camshaft opinions are like belly buttons; everyone has one and no two are alike" My Blazer Build: http://67-72chevytrucks.com/vboard/s...d.php?t=626752 My Engine Build: http://67-72chevytrucks.com/vboard/s...d.php?t=637336 Last edited by tjsblazer; 03-28-2016 at 11:05 PM. |
04-10-2015, 10:24 PM | #52 |
Registered User
Join Date: Oct 2009
Location: Great White North
Posts: 1,520
|
Re: tjs 72 Blazer Build
I had to cut my original Fuel tank hanger bracket to get it out so I made a new one. I got some 3/8" cold rolled rod, shaped to match a factory one and cut some threads. I just need to add some black paint or powder.
[IMG][/IMG]
__________________
Jeff. '72 Blazer K5 "Camshaft opinions are like belly buttons; everyone has one and no two are alike" My Blazer Build: http://67-72chevytrucks.com/vboard/s...d.php?t=626752 My Engine Build: http://67-72chevytrucks.com/vboard/s...d.php?t=637336 |
04-10-2015, 10:26 PM | #53 |
Registered User
Join Date: Oct 2009
Location: Great White North
Posts: 1,520
|
Re: tjs 72 Blazer Build
__________________
Jeff. '72 Blazer K5 "Camshaft opinions are like belly buttons; everyone has one and no two are alike" My Blazer Build: http://67-72chevytrucks.com/vboard/s...d.php?t=626752 My Engine Build: http://67-72chevytrucks.com/vboard/s...d.php?t=637336 |
04-10-2015, 10:28 PM | #54 |
Registered User
Join Date: Oct 2009
Location: Great White North
Posts: 1,520
|
Re: tjs 72 Blazer Build
Got a bag of items zinc plated. All the brake/fuel line clips. They had a minimum charge so I got the fuel fill pipe and some small brake parts that were all rusty redone.
[IMG][/IMG]
__________________
Jeff. '72 Blazer K5 "Camshaft opinions are like belly buttons; everyone has one and no two are alike" My Blazer Build: http://67-72chevytrucks.com/vboard/s...d.php?t=626752 My Engine Build: http://67-72chevytrucks.com/vboard/s...d.php?t=637336 |
04-10-2015, 10:32 PM | #55 |
Registered User
Join Date: Oct 2009
Location: Great White North
Posts: 1,520
|
Re: tjs 72 Blazer Build
These things are like a jigsaw puzzle. This took a service manual, some online pictures and a lot of my time. My first set of Drums ever. Calipers and rotors are soooo much easier. Ugghh, Right after I was done I noticed that the backing plate bolts were reversed to put the nut outside so I swapped them around.
[IMG][/IMG]
__________________
Jeff. '72 Blazer K5 "Camshaft opinions are like belly buttons; everyone has one and no two are alike" My Blazer Build: http://67-72chevytrucks.com/vboard/s...d.php?t=626752 My Engine Build: http://67-72chevytrucks.com/vboard/s...d.php?t=637336 |
04-10-2015, 10:34 PM | #56 |
Registered User
Join Date: Oct 2009
Location: Great White North
Posts: 1,520
|
Re: tjs 72 Blazer Build
It feels soooo good to finally be putting something TOGETHER. Too many months of taking apart and cleaning / painting. Have a couple of days to put back some chassis together. Hopefully some more updates over the weekend. Cheers.
__________________
Jeff. '72 Blazer K5 "Camshaft opinions are like belly buttons; everyone has one and no two are alike" My Blazer Build: http://67-72chevytrucks.com/vboard/s...d.php?t=626752 My Engine Build: http://67-72chevytrucks.com/vboard/s...d.php?t=637336 Last edited by tjsblazer; 04-11-2015 at 09:32 AM. |
04-11-2015, 12:54 AM | #57 |
Registered User
Join Date: Jul 2014
Location: Chico, California
Posts: 941
|
Re: tjs 72 Blazer Build
Nice update
|
04-11-2015, 12:04 PM | #58 |
Registered User
Join Date: Oct 2009
Location: Great White North
Posts: 1,520
|
Re: tjs 72 Blazer Build
__________________
Jeff. '72 Blazer K5 "Camshaft opinions are like belly buttons; everyone has one and no two are alike" My Blazer Build: http://67-72chevytrucks.com/vboard/s...d.php?t=626752 My Engine Build: http://67-72chevytrucks.com/vboard/s...d.php?t=637336 |
04-11-2015, 12:33 PM | #59 |
I'm trying....
Join Date: Oct 2013
Location: Athens, GA
Posts: 2,701
|
Re: tjs 72 Blazer Build
Isn't that just the best. I wish I had sent more stuff to be coated myself.
__________________
1970 K20 Z62 https://67-72chevytrucks.com/vboard/...56#post9334756 1970 Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=645076 1969 K10 SWB CST http://67-72chevytrucks.com/vboard/s...52#post8520352 1971 K20 Z84 https://67-72chevytrucks.com/vboard/...90#post9047290 1946 B.F. Avery Model A Tractor http://67-72chevytrucks.com/vboard/s...55#post8292555 "Sometimes I wonder if zander208 was even real..." |
04-11-2015, 07:36 PM | #60 |
Registered User
Join Date: Oct 2009
Location: Great White North
Posts: 1,520
|
Re: tjs 72 Blazer Build
Yes, I'm glad I got them done. I was grabbing anything I could think of Chassis wise. I had some Grade 8 U bolts I got made at the local spring shop and got them plated in the same lot.
__________________
Jeff. '72 Blazer K5 "Camshaft opinions are like belly buttons; everyone has one and no two are alike" My Blazer Build: http://67-72chevytrucks.com/vboard/s...d.php?t=626752 My Engine Build: http://67-72chevytrucks.com/vboard/s...d.php?t=637336 |
04-11-2015, 07:44 PM | #61 |
Registered User
Join Date: Oct 2009
Location: Great White North
Posts: 1,520
|
Re: tjs 72 Blazer Build
Front axle back together. Thanks to those here who have recently gone before me, I was well versed on how to get the Ball joint pre-loads set correctly. I put new front axles in but they don't make the 71/72. Have to get 73+. Just means the larger U-joint. Just barely fits through the knuckle! Also the seal at the back of the Spindle is a little different, I had to machined my 72 spindle 0.125 deeper where the spindle bearing and seal go. In the end it all went together no problem after lots of homework ahead of time.
[IMG][/IMG]
__________________
Jeff. '72 Blazer K5 "Camshaft opinions are like belly buttons; everyone has one and no two are alike" My Blazer Build: http://67-72chevytrucks.com/vboard/s...d.php?t=626752 My Engine Build: http://67-72chevytrucks.com/vboard/s...d.php?t=637336 |
04-11-2015, 08:02 PM | #62 |
Registered User
Join Date: Oct 2009
Location: Great White North
Posts: 1,520
|
Re: tjs 72 Blazer Build
__________________
Jeff. '72 Blazer K5 "Camshaft opinions are like belly buttons; everyone has one and no two are alike" My Blazer Build: http://67-72chevytrucks.com/vboard/s...d.php?t=626752 My Engine Build: http://67-72chevytrucks.com/vboard/s...d.php?t=637336 |
04-11-2015, 08:22 PM | #63 |
Registered User
Join Date: Oct 2009
Location: Great White North
Posts: 1,520
|
Re: tjs 72 Blazer Build
__________________
Jeff. '72 Blazer K5 "Camshaft opinions are like belly buttons; everyone has one and no two are alike" My Blazer Build: http://67-72chevytrucks.com/vboard/s...d.php?t=626752 My Engine Build: http://67-72chevytrucks.com/vboard/s...d.php?t=637336 |
04-11-2015, 08:25 PM | #64 |
Senior Member
Join Date: May 2006
Location: Philadelphia, Pa. 19454
Posts: 9,691
|
Re: tjs 72 Blazer Build
Hey Jeff, nice work. Another one to follow. What coating did you use on your brake drums
__________________
Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim |
04-11-2015, 10:16 PM | #65 |
Registered User
Join Date: Oct 2009
Location: Great White North
Posts: 1,520
|
Re: tjs 72 Blazer Build
Thank you. I used high temp manifold/header paint.
__________________
Jeff. '72 Blazer K5 "Camshaft opinions are like belly buttons; everyone has one and no two are alike" My Blazer Build: http://67-72chevytrucks.com/vboard/s...d.php?t=626752 My Engine Build: http://67-72chevytrucks.com/vboard/s...d.php?t=637336 |
04-11-2015, 10:21 PM | #66 |
Senior Member
Join Date: May 2006
Location: Philadelphia, Pa. 19454
Posts: 9,691
|
Re: tjs 72 Blazer Build
Perfect idea,ty
__________________
Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim |
04-11-2015, 10:39 PM | #67 |
Carpe manana
Join Date: Dec 2010
Location: Eau Claire, WI
Posts: 12,422
|
Re: tjs 72 Blazer Build
Looks great! How are the hub dials holding up as regards the blue color and where did you get the plating done?
__________________
1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland |
04-11-2015, 10:50 PM | #68 |
Registered User
Join Date: Oct 2009
Location: Great White North
Posts: 1,520
|
Re: tjs 72 Blazer Build
Thanks Pete. So far dials look the same as when they were first cleaned up. Mind you, they have just been sitting on my work bench.
__________________
Jeff. '72 Blazer K5 "Camshaft opinions are like belly buttons; everyone has one and no two are alike" My Blazer Build: http://67-72chevytrucks.com/vboard/s...d.php?t=626752 My Engine Build: http://67-72chevytrucks.com/vboard/s...d.php?t=637336 |
04-11-2015, 10:57 PM | #69 |
Registered User
Join Date: Oct 2009
Location: Great White North
Posts: 1,520
|
Re: tjs 72 Blazer Build
It was time to get the weight off of the 40 year old wooden saw horses that were holding it. I think the legs were about to snap off. They were fine when it was just the weight of the frame. So I have a "roller". I'll work on the hard fuel and brake lines over the next week.
[IMG][/IMG]
__________________
Jeff. '72 Blazer K5 "Camshaft opinions are like belly buttons; everyone has one and no two are alike" My Blazer Build: http://67-72chevytrucks.com/vboard/s...d.php?t=626752 My Engine Build: http://67-72chevytrucks.com/vboard/s...d.php?t=637336 |
04-11-2015, 10:59 PM | #70 |
Registered User
Join Date: Oct 2009
Location: Great White North
Posts: 1,520
|
Re: tjs 72 Blazer Build
I had 15 mins of play time left today before dinner so I managed to get the Clutch on the Engine.
[IMG][/IMG]
__________________
Jeff. '72 Blazer K5 "Camshaft opinions are like belly buttons; everyone has one and no two are alike" My Blazer Build: http://67-72chevytrucks.com/vboard/s...d.php?t=626752 My Engine Build: http://67-72chevytrucks.com/vboard/s...d.php?t=637336 |
04-11-2015, 11:03 PM | #71 |
Senior Member
Join Date: Mar 2004
Location: Lee's Summit, MO (KC)
Posts: 742
|
Re: tjs 72 Blazer Build
looking BADAZZ!
__________________
-Keegan- '72 Jimmy 4x4 - 5.3/4L65E/NP205 swap http://67-72chevytrucks.com/vboard/s...d.php?t=663780 |
04-11-2015, 11:04 PM | #72 |
Registered User
Join Date: Oct 2009
Location: Great White North
Posts: 1,520
|
Re: tjs 72 Blazer Build
Sorry, I missed your second question. I just used a local plating shop in the closest city to me here in Ontario, Canada. They do all zinc, cadmium, nickel, and anodizing.
__________________
Jeff. '72 Blazer K5 "Camshaft opinions are like belly buttons; everyone has one and no two are alike" My Blazer Build: http://67-72chevytrucks.com/vboard/s...d.php?t=626752 My Engine Build: http://67-72chevytrucks.com/vboard/s...d.php?t=637336 |
04-12-2015, 06:58 AM | #73 |
Registered User
Join Date: Jan 2014
Location: belleville ontario
Posts: 354
|
Re: tjs 72 Blazer Build
Looking great!
|
04-12-2015, 07:38 AM | #74 |
Senior Member
Join Date: May 2006
Location: Philadelphia, Pa. 19454
Posts: 9,691
|
Re: tjs 72 Blazer Build
Jeff, if you are going to use the OEM spark plug wire looms, now is the time to mount the rear looms, they are a son of a gun to install once the engine is in. I used studs, easier for install
Great assembly work
__________________
Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim |
04-12-2015, 02:03 PM | #75 | |
Registered User
Join Date: Oct 2009
Location: Great White North
Posts: 1,520
|
Re: tjs 72 Blazer Build
Quote:
Thanks for the heads up.
__________________
Jeff. '72 Blazer K5 "Camshaft opinions are like belly buttons; everyone has one and no two are alike" My Blazer Build: http://67-72chevytrucks.com/vboard/s...d.php?t=626752 My Engine Build: http://67-72chevytrucks.com/vboard/s...d.php?t=637336 |
|
Bookmarks |
|
|