KS parting a 67 chevy pretty original with add on AC - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 07-20-2011, 10:13 PM

Elliott949, rad support is bad sorry

Leroy-B1, I got the ac off and a pic here in a bit

Oldgold, it need all cab mounts, has some rust in rockers and corners, not sure about floor pans yet

Thanks Randy

teeitup · 07-20-2011, 10:15 PM

here is some of ths stuff I got off
Ac brackets for Mondo
AC unit for Leroy-B1

teeitup · 07-20-2011, 10:17 PM

hubcap pics for m6z, one has some surface rust the other has a couple small dings $20 plus shipping for pair

teeitup · 07-20-2011, 10:18 PM

bumper pics for Jud

teeitup · 07-20-2011, 10:34 PM

Walts, Ryan its a 010 block. Thanks Randy

Vintage Windmills · 07-20-2011, 10:38 PM

Randy,

I kind of like KS 99479, Any dents or rust on it? Is it lighter or heavier guage than the others? Is that a receiver mount on the bottom? Price picked up? thanks, Jud

68lowburb · 07-20-2011, 11:55 PM

randy how much for steering wheel and horn button thanks jimmy shipped to 70737

Walts_restoration · 07-21-2011, 12:44 AM

whats the engine code on the little pad on the passenger side of the motor?

**oldgold70c10** · 07-21-2011, 06:53 PM

Quote:

Originally Posted by teeitup

Elliott949, rad support is bad sorry

Leroy-B1, I got the ac off and a pic here in a bit

Oldgold, it need all cab mounts, has some rust in rockers and corners, not sure about floor pans yet

Thanks Randy

Thanks Randy. Please let me know when you find out more.

m6z · 07-21-2011, 09:17 PM

I'll pass on the hubcaps

teeitup · 07-21-2011, 10:07 PM

Vintage Windmills, Jud, its in good shape $30 for it, yes receiver slot, $20 each for the others

68lowburb, Jimmy, $90 plus shipping for wheel and horn cap, I sold the steering wheel guts already

Walts, Ryan, I'll post pics of numbers here in a bit

Oldgold, Wes, pics coming in a bit

m6z, no problem

Hotfun, Mark, your up on the hubcaps, pics of them off on this thread somewhere

Thanks Randy

teeitup · 07-21-2011, 10:35 PM

pics for Wes. I has some rust in kick panels down low and some around bottom of vent on pass side. Need all four cab supports. Some rust on cowl.

teeitup · 07-21-2011, 10:37 PM

more

teeitup · 07-21-2011, 10:39 PM

moooooooooooo

Vintage Windmills · 07-21-2011, 11:27 PM

Randy, I'll take that 99479 one for sure as long as you can hold onto until sept-oct.

Whats the next best one between the Arkansas one and the gray one with no plate? Is that rust damage or dirt on the no plate one by the right taillight? any rust through on either?

Walts_restoration · 07-22-2011, 02:45 AM

comes up as a 74 350 2 barrel motor, should be a 2 bolt main. Ill pass, but thanks randy.

OLEBEATER · 07-22-2011, 07:05 AM

Randy, how much for the 2bbl carb and air cleaner spacer to Va 22435?

Elliot949 · 07-22-2011, 08:31 AM

thanks for letting me know on the radiator support... what is the different between a 67 radiator support and any other year... I understand there is a difference...

Dan

teeitup · 07-22-2011, 09:40 AM

Vintage, storing is no problem, the gray one is better shape

Walts, thanks no problem

Olebeater, its a 4 barrell, sorry

Dan, I think they are shorter

Thanks Randy

Elliot949 · 07-22-2011, 10:06 AM

so then 67-68 should be the same right?

teeitup · 07-22-2011, 10:28 AM

yes sir

Elliot949 · 07-22-2011, 12:16 PM

thanks

captain planet · 07-22-2011, 12:49 PM

Are you willing to part with the rear trailing arms? If so what shape are they and what price you looking for.

Thanks,
Merkle

Vintage Windmills · 07-22-2011, 03:19 PM

Randy, hows the rust on the gray one?

teeitup · 07-22-2011, 04:39 PM

No problem Dan

Merkle, I think they are good if so $100 plus shipping for pair

Jud, I think its good shape, but I will check it out Sat, off now to go see the new Lightning McQueen movie now with the kids

Thanks Randy

07-20-2011, 10:13 PM	#51
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 67 chevy pretty original with add on AC Elliott949, rad support is bad sorry Leroy-B1, I got the ac off and a pic here in a bit Oldgold, it need all cab mounts, has some rust in rockers and corners, not sure about floor pans yet Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-20-2011, 10:15 PM	#52
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 67 chevy pretty original with add on AC here is some of ths stuff I got off Ac brackets for Mondo AC unit for Leroy-B1 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-20-2011, 10:17 PM	#53
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 67 chevy pretty original with add on AC hubcap pics for m6z, one has some surface rust the other has a couple small dings $20 plus shipping for pair Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-20-2011, 10:18 PM	#54
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 67 chevy pretty original with add on AC bumper pics for Jud Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-20-2011, 10:34 PM	#55
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 67 chevy pretty original with add on AC Walts, Ryan its a 010 block. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-20-2011, 10:38 PM	#56
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: parting a 67 chevy pretty original with add on AC Randy, I kind of like KS 99479, Any dents or rust on it? Is it lighter or heavier guage than the others? Is that a receiver mount on the bottom? Price picked up? thanks, Jud __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

07-20-2011, 11:55 PM	#57
68lowburb Registered User Join Date: Sep 2006 Location: prairieville, louisiana Posts: 883	Re: parting a 67 chevy pretty original with add on AC randy how much for steering wheel and horn button thanks jimmy shipped to 70737

07-21-2011, 12:44 AM	#58
Walts_restoration Real Projects never die Join Date: Jan 2007 Location: Lawrence, kansas Posts: 1,508	Re: parting a 67 chevy pretty original with add on AC whats the engine code on the little pad on the passenger side of the motor? __________________ Ill put it this way, ive got a few lawn ornaments My name tag says Ryan KansasTwister On other forums

07-21-2011, 09:17 PM	#60
m6z Registered User Join Date: Aug 2008 Location: Pittsburg, KS Posts: 2,466	Re: parting a 67 chevy pretty original with add on AC I'll pass on the hubcaps __________________ Doug Looking for a 67-72 short bed driver.....

07-21-2011, 10:07 PM	#61
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 67 chevy pretty original with add on AC Vintage Windmills, Jud, its in good shape $30 for it, yes receiver slot, $20 each for the others 68lowburb, Jimmy, $90 plus shipping for wheel and horn cap, I sold the steering wheel guts already Walts, Ryan, I'll post pics of numbers here in a bit Oldgold, Wes, pics coming in a bit m6z, no problem Hotfun, Mark, your up on the hubcaps, pics of them off on this thread somewhere Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-21-2011, 10:35 PM	#62
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 67 chevy pretty original with add on AC pics for Wes. I has some rust in kick panels down low and some around bottom of vent on pass side. Need all four cab supports. Some rust on cowl. Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-21-2011, 10:37 PM	#63
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 67 chevy pretty original with add on AC more Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-21-2011, 10:39 PM	#64
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 67 chevy pretty original with add on AC moooooooooooo Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-21-2011, 11:27 PM	#65
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: parting a 67 chevy pretty original with add on AC Randy, I'll take that 99479 one for sure as long as you can hold onto until sept-oct. Whats the next best one between the Arkansas one and the gray one with no plate? Is that rust damage or dirt on the no plate one by the right taillight? any rust through on either? __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

07-22-2011, 02:45 AM	#66
Walts_restoration Real Projects never die Join Date: Jan 2007 Location: Lawrence, kansas Posts: 1,508	Re: parting a 67 chevy pretty original with add on AC comes up as a 74 350 2 barrel motor, should be a 2 bolt main. Ill pass, but thanks randy. __________________ Ill put it this way, ive got a few lawn ornaments My name tag says Ryan KansasTwister On other forums



Register or Log In To remove these advertisements.

07-22-2011, 07:05 AM	#67
OLEBEATER Registered User Join Date: Mar 2009 Location: Virginia Posts: 295	Re: parting a 67 chevy pretty original with add on AC Randy, how much for the 2bbl carb and air cleaner spacer to Va 22435?

07-22-2011, 08:31 AM	#68
Elliot949 Registered User Join Date: Sep 2010 Location: Winfield, Ks. Posts: 4,162	Re: parting a 67 chevy pretty original with add on AC thanks for letting me know on the radiator support... what is the different between a 67 radiator support and any other year... I understand there is a difference... Dan

07-22-2011, 09:40 AM	#69
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 67 chevy pretty original with add on AC Vintage, storing is no problem, the gray one is better shape Walts, thanks no problem Olebeater, its a 4 barrell, sorry Dan, I think they are shorter Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-22-2011, 10:06 AM	#70
Elliot949 Registered User Join Date: Sep 2010 Location: Winfield, Ks. Posts: 4,162	Re: parting a 67 chevy pretty original with add on AC so then 67-68 should be the same right?

07-22-2011, 10:28 AM	#71
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 67 chevy pretty original with add on AC yes sir __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-22-2011, 12:16 PM	#72
Elliot949 Registered User Join Date: Sep 2010 Location: Winfield, Ks. Posts: 4,162	Re: parting a 67 chevy pretty original with add on AC thanks

07-22-2011, 12:49 PM	#73
captain planet Registered User Join Date: Jun 2011 Location: Van Wert, Ohio Posts: 14	Re: parting a 67 chevy pretty original with add on AC Are you willing to part with the rear trailing arms? If so what shape are they and what price you looking for. Thanks, Merkle

07-22-2011, 03:19 PM	#74
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: parting a 67 chevy pretty original with add on AC Randy, hows the rust on the gray one? __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

07-22-2011, 04:39 PM	#75
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 67 chevy pretty original with add on AC No problem Dan Merkle, I think they are good if so $100 plus shipping for pair Jud, I think its good shape, but I will check it out Sat, off now to go see the new Lightning McQueen movie now with the kids Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

Register or Log In To remove these advertisements.