KS Parting 72 GMC Sierra 3/4 ton BB - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Cash3481** · 08-07-2012, 10:20 PM

Critterman:
Here is the pics of the Clams for the 72 only motor mounts.
Your clams will go out tomorrow as promissed. They are a little dirty but not rusted.
LMK on the Harness so I can box it up as well if you still want it.

I included the pics of the stands since they are still for sale for $135 SHIPPED!
I also have all the hardware I could save from removing these stands with the long bolts and battery holder clamps included in a ziplock bag.
There is two spots where the cutoff wheel slipped and hit the stands but after blasting and paint you shouldnt see them.

Mike

villa 66 · 08-16-2012, 01:12 PM

Just curious what would you take for spindles,rotors and caliper shipped too 78570 Tx What kind of shape does it look like. Thanks

**WIDESIDE72** · 08-16-2012, 03:04 PM

Indidnt realize you responded to my request on the oil line. Could you do $25 shipped?
Posted via Mobile Device

454C10CHEVY · 08-16-2012, 03:23 PM

How much for mounts and clams?

**Cash3481** · 08-16-2012, 03:53 PM

Quote:

Originally Posted by villa 66

Just curious what would you take for spindles,rotors and caliper shipped too 78570 Tx What kind of shape does it look like. Thanks

I will post pics later today. These are heave so I'll have to get heavy metal to get me a quote for you.

Quote:

Originally Posted by WIDESIDE72

Indidnt realize you responded to my request on the oil line. Could you do $25 shipped?
Posted via Mobile Device

Sorry I can't go that far down.

Quote:

Originally Posted by 454C10CHEVY

How much for mounts and clams?

I will be posting slot of BB stuff later today.
The clams and stands will be $175 shipped.
Mike
Posted via Mobile Device

454C10CHEVY · 08-16-2012, 03:54 PM

Ok will stay posted for pics

longhorn70gmc · 08-16-2012, 04:01 PM

Quote:

Originally Posted by Cash3481

Longhorn70GMC:
sir you are up on the steps if your still interested, Trevor passed. Please lmk when you have a chance. $50 I can get you mor pics of them removed or installed if you need it.
Mike
Posted via Mobile Device

Hello Mike,
I apoligize for being tardy on here, I had forgotton I had asked about the steps. I am very much still interested and if there still available I will take them. Is the price with shipping?
R/
Billy

**Cash3481** · 08-16-2012, 07:10 PM

Quote:

Originally Posted by longhorn70gmc

Hello Mike,
I apoligize for being tardy on here, I had forgotton I had asked about the steps. I am very much still interested and if there still available I will take them. Is the price with shipping?
R/
Billy

Still available for you. I'll pm you the pp. Price is shipped.
Mike
Posted via Mobile Device

Darren MagooGardner · 08-16-2012, 10:14 PM

how much for the lower belt molding set in the first pic?

**Cash3481** · 08-16-2012, 11:00 PM

Quote:

Originally Posted by Darren MagooGardner

how much for the lower belt molding set in the first pic?

Really not sure on the price... I'll take pics of it laid out and get back with you this weekend. It will be reasonable for sure.
Mike
Posted via Mobile Device

Darren MagooGardner · 08-17-2012, 01:27 AM

Soung good thanks..this is what i got so far

longhorn70gmc · 08-18-2012, 03:28 PM

Quote:

Originally Posted by Cash3481

Still available for you. I'll pm you the pp. Price is shipped.
Mike
Posted via Mobile Device

Hello Cash,
Thanks for getting back to me. I have answered back the PM. Sounds great on the price. My address is
Billy Wombold
1124 Sims
Ridgecrest CA. 93555
I'll await your return PM and get it ready for you. Enjoy the weekend.
R/
Billy

**Cash3481** · 08-18-2012, 08:10 PM

Quote:

Originally Posted by Darren MagooGardner

Soung good thanks..this is what i got so far

Darren:
Here is some pics of the trim that I have. Some is/was wood grain and some has small curves with a few dents on some pieces. I posted some pics of the woodgrain and of most of what I have... there is definately enough for the PS and I should be able to make you a reasonable set if your intereasted after you see the pics. I assume you will be painting it black but I cant tell in the pics. LMK. As far as price Ill have to see what its worth. I have no idea.
Mike

Darren MagooGardner · 08-18-2012, 09:05 PM

I think it will do fine..gimmi a good price and ill paypal ya
thanks Mr.Magoo

longhorn70gmc · 08-21-2012, 04:15 PM

Hello CASH3481,
I got the MO and letter on its way to you for 50 bucks. Thanks for taking care of me.
R/
Billy

**Cash3481** · 08-21-2012, 04:25 PM

Quote:

Originally Posted by longhorn70gmc

Hello CASH3481,
I got the MO and letter on its way to you for 50 bucks. Thanks for taking care of me.
R/
Billy

Billy,
Appreciate it, Ill get it out ASAP when it gets here.
Mike

Darren MagooGardner · 08-21-2012, 10:53 PM

How bout them door mirrors on the solid yellow truck yellow truck? got any good pics?

71suburban/70CST · 08-22-2012, 10:09 PM

Any chance this truck has the Eaton 3rd member style rear with a locker?
Justin

Pmarti69 · 08-22-2012, 10:21 PM

How much for the uncut dash with the vents and hoses, but without the glovebox door. shipped to 77345

Pmarti69 · 08-22-2012, 10:23 PM

I forgot the clutch cable block off plate too.

larryd · 08-22-2012, 11:20 PM

Name: Blazer Drivers Side.jpg
Views: 257
Size: 47.6 KB

Would you have this area of the rear drivers side taillight steel?
Thanks
Larry

**Cash3481** · 08-22-2012, 11:21 PM

Quote:

Originally Posted by Pmarti69

How much for the uncut dash with the vents and hoses, but without the glovebox door. shipped to 77345

I have a few center vents but no outer vents or hoses! I'll have to pack it and get a quote if your serious but I can tell you shipping will be around $80

Quote:

Originally Posted by Pmarti69

I forgot the clutch cable block off plate too.

Add $8 to the dash and I'll throw it in with it.

Quote:

Originally Posted by 71suburban/70CST

Any chance this truck has the Eaton 3rd member style rear with a locker?
Justin

I don't think so. I can post a picture for you if you'd like.
Posted via Mobile Device

**Cash3481** · 08-22-2012, 11:24 PM

Quote:

Originally Posted by larryd

Attachment 974628

Would you have this area of the rear drivers side taillight steel?
Thanks
Larry

This truck wAs crushed already. The bed on the truck I'm parting now is going to be sold complete. I'll keep you in mind on the next truck though. If it doesn't have a good bed I'll cut it out for you. You missed getting this by about a week... Sorry.
Mike
Posted via Mobile Device

larryd · 08-22-2012, 11:32 PM

Mike,
Thanks and keep me in mind...
Larry

Pmarti69 · 08-23-2012, 09:36 PM

Quote:

Originally Posted by Cash3481

I have a few center vents but no outer vents or hoses! I'll have to pack it and get a quote if your serious but I can tell you shipping will be around $80

Add $8 to the dash and I'll throw it in with it.

I don't think so. I can post a picture for you if you'd like.
Posted via Mobile Device

I cant find the price you quoted for the uncut dash. If you could repost the price for the dash. Thanks Paul

08-07-2012, 10:20 PM	#51
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: Parting 72 GMC Sierra 3/4 ton BB Critterman: Here is the pics of the Clams for the 72 only motor mounts. Your clams will go out tomorrow as promissed. They are a little dirty but not rusted. LMK on the Harness so I can box it up as well if you still want it. I included the pics of the stands since they are still for sale for $135 SHIPPED! I also have all the hardware I could save from removing these stands with the long bolts and battery holder clamps included in a ziplock bag. There is two spots where the cutoff wheel slipped and hit the stands but after blasting and paint you shouldnt see them. Mike Attached Images

08-16-2012, 01:12 PM	#52
villa 66 Registered User Join Date: May 2009 Location: MERCEDES,TEXAS Posts: 146	Re: Parting 72 GMC Sierra 3/4 ton BB Just curious what would you take for spindles,rotors and caliper shipped too 78570 Tx What kind of shape does it look like. Thanks

08-16-2012, 03:04 PM	#53
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,494	Re: Parting 72 GMC Sierra 3/4 ton BB Indidnt realize you responded to my request on the oil line. Could you do $25 shipped? Posted via Mobile Device

08-16-2012, 03:23 PM	#54
454C10CHEVY Registered User Join Date: Aug 2012 Location: Midland,Tx Posts: 103	Re: Parting 72 GMC Sierra 3/4 ton BB How much for mounts and clams?

08-16-2012, 03:54 PM	#56
454C10CHEVY Registered User Join Date: Aug 2012 Location: Midland,Tx Posts: 103	Re: Parting 72 GMC Sierra 3/4 ton BB Ok will stay posted for pics

08-16-2012, 10:14 PM	#59
Darren MagooGardner Registered User Join Date: May 2012 Location: minden la Posts: 704	Re: Parting 72 GMC Sierra 3/4 ton BB how much for the lower belt molding set in the first pic?

08-17-2012, 01:27 AM	#61
Darren MagooGardner Registered User Join Date: May 2012 Location: minden la Posts: 704	Re: Parting 72 GMC Sierra 3/4 ton BB Soung good thanks..this is what i got so far Attached Images

08-18-2012, 09:05 PM	#64
Darren MagooGardner Registered User Join Date: May 2012 Location: minden la Posts: 704	Re: Parting 72 GMC Sierra 3/4 ton BB I think it will do fine..gimmi a good price and ill paypal ya thanks Mr.Magoo

08-21-2012, 04:15 PM	#65
longhorn70gmc Senior Member Join Date: Feb 2001 Location: Ridgecrest. CA, USA Posts: 1,715	Re: Parting 72 GMC Sierra 3/4 ton BB Hello CASH3481, I got the MO and letter on its way to you for 50 bucks. Thanks for taking care of me. R/ Billy __________________ Billy 1970 GMC Sierra Grande 402/TH400 (Longhorn)14 years and counting rebuild! 1975 (Build) Chevrolet SWB 4X4 350 SB Lifted 6 inches 1970 Ford F250 Ranger 390 BB 2010 Ford Super Duty F250 XLT W/4 inch lift kit and Pro Comp Tires Hub Cap Freak! *I need another truck like I need another hole in the head!* I'M IN THE MARKET...AS IT WERE!

08-21-2012, 10:53 PM	#67
Darren MagooGardner Registered User Join Date: May 2012 Location: minden la Posts: 704	Re: Parting 72 GMC Sierra 3/4 ton BB How bout them door mirrors on the solid yellow truck yellow truck? got any good pics?

08-22-2012, 10:09 PM	#68
71suburban/70CST Registered User Join Date: Feb 2010 Location: Chestertown, Md Posts: 102	Re: Parting 72 GMC Sierra 3/4 ton BB Any chance this truck has the Eaton 3rd member style rear with a locker? Justin

08-22-2012, 10:21 PM	#69
Pmarti69 Registered User Join Date: Feb 2012 Location: North of Houston, Tx Posts: 346	Re: Parting 72 GMC Sierra 3/4 ton BB How much for the uncut dash with the vents and hoses, but without the glovebox door. shipped to 77345 __________________ Houston Area Lawman 72 GMC Fleetside (AKA: MERLIN) ZZ4 Crate Engine TH400 with Stage two kit

08-22-2012, 10:23 PM	#70
Pmarti69 Registered User Join Date: Feb 2012 Location: North of Houston, Tx Posts: 346	Re: Parting 72 GMC Sierra 3/4 ton BB I forgot the clutch cable block off plate too. __________________ Houston Area Lawman 72 GMC Fleetside (AKA: MERLIN) ZZ4 Crate Engine TH400 with Stage two kit

08-22-2012, 11:20 PM	#71
larryd Registered User Join Date: Apr 2007 Location: quincy il Posts: 44	Re: Parting 72 GMC Sierra 3/4 ton BB Would you have this area of the rear drivers side taillight steel? Thanks Larry

08-22-2012, 11:32 PM	#74
larryd Registered User Join Date: Apr 2007 Location: quincy il Posts: 44	Re: Parting 72 GMC Sierra 3/4 ton BB Mike, Thanks and keep me in mind... Larry



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.