KS Parting out Chevy C20 Cheyenne Custom Camper - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

John Pasinski · 11-25-2013, 04:23 AM

Randy...I'm interested in the cab mouldings. Also, I'd like to get in line for the jack, handle, & lug wrench.

**1972BackInBlackC10** · 11-25-2013, 08:11 AM

how much for the woodgrain inserts for the door panels and would you ship to Canada?

teeitup · 11-25-2013, 09:24 AM

Dirts72, Derrick, pics tonight

Ontrak12, Bill, I will get them off this week and get you a total

blackhawkip, no jack unless its stuffed under seat

Pmart69, sure we can work a deal on all those

nightmare, band is beat up pretty bad, not worth the shipping price

sduckworth13, Scott, I have one guy ahead of you on cab

afcamaro, Adam, I was thinking about making me a setup like you've been doing, I was going to pm you for pics and info

Hard_Rain420, I know the drivers side is beat up, I'll check pass side

SReddy, Summi, I'll check them out

John, I'll check the cab molding out, sorry no jack

1972BackinBlackC10, I was wanting to to to sell with panels but I may end up splitting them up. I will decide on that

Thanks Randy

teeitup · 11-25-2013, 09:26 AM

Guys I will try to start parting this truck some after work this week and getting more pics as I part, as I said it may end up being next weekend before I get it all done. Thanks for your patience, Randy

**1972BackInBlackC10** · 11-25-2013, 09:39 AM

I don't need the door panels but I don't want to miss out on the inserts either, how much would you want for the door panels if you don't sell the inserts seperate?

teeitup · 11-25-2013, 09:45 AM

$80 plus shipping for door panels with inserts, Thanks Randy

**1972BackInBlackC10** · 11-25-2013, 09:49 AM

ill take them, ill send you a pm wit my address so you can give me a total

Pmarti69 · 11-25-2013, 09:55 AM

Randy,

Thanks just let me know on the bolts and screws shipped to 77345

tallbob · 11-25-2013, 11:37 AM

What would you need for the lower pulley(s)that are bolted on the harmonic balancer, shipped to 15601? Thanks much, Bob

teeitup · 11-25-2013, 01:36 PM

1972BackinBlack, I'll have to find a box to get a quote, I will try tomorrow

PMarti69, I will get with you

tallBob, Sorry I wish to keep all pullies together, I have one guy ahead of you on these

Thanks Randy

**Oddfire** · 11-25-2013, 02:45 PM

Randy: I'd like prices on antenna, distributor, coil, & radiator. Pending pics & prices. Zip is 22630. Thanks Jamie 71

Longhorn

**1972BackInBlackC10** · 11-25-2013, 05:35 PM

im sorry randy but I have to pass on the door panels I sliced my tire open this morning while I was at the land fill and have to buy a new one

**71blksuper4x4** · 11-25-2013, 06:55 PM

Randy, I'll take the rear slider and inner grille. Trevor

teeitup · 11-25-2013, 07:24 PM

Jamie, I'll get pics once I get it all parted

1972BackInBlack, no problem

Trevor, they are yours

Thanks Randy

Elliot949 · 11-25-2013, 07:55 PM

Quote:

Originally Posted by teeitup

Elliot949, Dan I popped these off while I was out there tonight. $32 shipped for the set, all studs are good

Randy I will take the Custom Camper Emblems for 32.00... PM sent

duckdude · 11-25-2013, 08:35 PM

how much for the Cheyenne emblems and antenna shipped to 64601

warbucket · 11-25-2013, 08:43 PM

Interested in the brake booster, master cylinder, proportioning valve and support bar. my zip is 19083

teeitup · 11-25-2013, 09:16 PM

Dan, I'll get with you

duckdude, your 2nd on antenna. Cheyenne emblems are $22 shipped

warbucket, your first up on it

Thanks Randy

teeitup · 11-25-2013, 09:17 PM

Guys I got alot of pics, I got quite a few parts off in the 2 hours I worked on it, I will try to get them posted later tonight, I need to see my kids for a few hours tonight. I'll be parting more tomorrow night. Thanks Randy

Youey · 11-25-2013, 09:20 PM

need a price on alternator bracket with hardware shipped to 08527

teeitup · 11-25-2013, 09:26 PM

For the Alt bracket set $35 shipped

warbucket · 11-25-2013, 09:32 PM

warbucket, your first up on it

Thanks Randy[/QUOTE]

Cool, also may be interested in the steering column if tight and under dash support.

Youey · 11-25-2013, 09:39 PM

Quote:

Originally Posted by teeitup

For the Alt bracket set $35 shipped

ill take it.

**nightmare** · 11-25-2013, 09:40 PM

Quote:

Originally Posted by teeitup

...
nightmare, band is beat up pretty bad, not worth the shipping price

...

Thanks Randy

Thanks Randy, I appreciate you letting me know. GLWS

Vintage Windmills · 11-25-2013, 09:55 PM

Randy,

I see Trevor took the inner grille, but if you find another one or more, I'd be interested. Could use good outers as well but would need to be as good as last one I got from you.

11-25-2013, 04:23 AM	#51
John Pasinski Registered User Join Date: Aug 2007 Location: orlando Posts: 456	Re: Parting out Chevy C20 Cheyenne Custom Camper Randy...I'm interested in the cab mouldings. Also, I'd like to get in line for the jack, handle, & lug wrench. __________________ A man's thoughts devise his ways; but it's GOD that directs his steps.

11-25-2013, 08:11 AM	#52
1972BackInBlackC10 Senior Member Join Date: Jan 2012 Location: Estevan, Saskatchewan Posts: 1,025	Re: Parting out Chevy C20 Cheyenne Custom Camper how much for the woodgrain inserts for the door panels and would you ship to Canada?

11-25-2013, 09:24 AM	#53
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting out Chevy C20 Cheyenne Custom Camper Dirts72, Derrick, pics tonight Ontrak12, Bill, I will get them off this week and get you a total blackhawkip, no jack unless its stuffed under seat Pmart69, sure we can work a deal on all those nightmare, band is beat up pretty bad, not worth the shipping price sduckworth13, Scott, I have one guy ahead of you on cab afcamaro, Adam, I was thinking about making me a setup like you've been doing, I was going to pm you for pics and info Hard_Rain420, I know the drivers side is beat up, I'll check pass side SReddy, Summi, I'll check them out John, I'll check the cab molding out, sorry no jack 1972BackinBlackC10, I was wanting to to to sell with panels but I may end up splitting them up. I will decide on that Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-25-2013, 09:26 AM	#54
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting out Chevy C20 Cheyenne Custom Camper Guys I will try to start parting this truck some after work this week and getting more pics as I part, as I said it may end up being next weekend before I get it all done. Thanks for your patience, Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-25-2013, 09:39 AM	#55
1972BackInBlackC10 Senior Member Join Date: Jan 2012 Location: Estevan, Saskatchewan Posts: 1,025	Re: Parting out Chevy C20 Cheyenne Custom Camper I don't need the door panels but I don't want to miss out on the inserts either, how much would you want for the door panels if you don't sell the inserts seperate?

11-25-2013, 09:45 AM	#56
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting out Chevy C20 Cheyenne Custom Camper $80 plus shipping for door panels with inserts, Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-25-2013, 09:49 AM	#57
1972BackInBlackC10 Senior Member Join Date: Jan 2012 Location: Estevan, Saskatchewan Posts: 1,025	Re: Parting out Chevy C20 Cheyenne Custom Camper ill take them, ill send you a pm wit my address so you can give me a total

11-25-2013, 09:55 AM	#58
Pmarti69 Registered User Join Date: Feb 2012 Location: North of Houston, Tx Posts: 346	Re: Parting out Chevy C20 Cheyenne Custom Camper Randy, Thanks just let me know on the bolts and screws shipped to 77345 __________________ Houston Area Lawman 72 GMC Fleetside (AKA: MERLIN) ZZ4 Crate Engine TH400 with Stage two kit

11-25-2013, 11:37 AM	#59
tallbob Registered User Join Date: Aug 2013 Location: Greensburg,Pa Posts: 147	Re: Parting out Chevy C20 Cheyenne Custom Camper What would you need for the lower pulley(s)that are bolted on the harmonic balancer, shipped to 15601? Thanks much, Bob

11-25-2013, 01:36 PM	#60
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting out Chevy C20 Cheyenne Custom Camper 1972BackinBlack, I'll have to find a box to get a quote, I will try tomorrow PMarti69, I will get with you tallBob, Sorry I wish to keep all pullies together, I have one guy ahead of you on these Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-25-2013, 02:45 PM	#61
Oddfire Senior Member Join Date: Jan 2013 Location: Front Royal, Va Posts: 689	Re: Parting out Chevy C20 Cheyenne Custom Camper Randy: I'd like prices on antenna, distributor, coil, & radiator. Pending pics & prices. Zip is 22630. Thanks Jamie 71 Longhorn

11-25-2013, 05:35 PM	#62
1972BackInBlackC10 Senior Member Join Date: Jan 2012 Location: Estevan, Saskatchewan Posts: 1,025	Re: Parting out Chevy C20 Cheyenne Custom Camper im sorry randy but I have to pass on the door panels I sliced my tire open this morning while I was at the land fill and have to buy a new one

11-25-2013, 06:55 PM	#63
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,151	Re: Parting out Chevy C20 Cheyenne Custom Camper Randy, I'll take the rear slider and inner grille. Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

11-25-2013, 07:24 PM	#64
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting out Chevy C20 Cheyenne Custom Camper Jamie, I'll get pics once I get it all parted 1972BackInBlack, no problem Trevor, they are yours Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-25-2013, 08:35 PM	#66
duckdude Registered User Join Date: Jun 2011 Location: chillicothe mo Posts: 225	Re: Parting out Chevy C20 Cheyenne Custom Camper how much for the Cheyenne emblems and antenna shipped to 64601



Register or Log In To remove these advertisements.

11-25-2013, 08:43 PM	#67
warbucket Registered User Join Date: Mar 2011 Location: Havertown Pa Posts: 392	Re: Parting out Chevy C20 Cheyenne Custom Camper Interested in the brake booster, master cylinder, proportioning valve and support bar. my zip is 19083

11-25-2013, 09:16 PM	#68
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting out Chevy C20 Cheyenne Custom Camper Dan, I'll get with you duckdude, your 2nd on antenna. Cheyenne emblems are $22 shipped warbucket, your first up on it Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-25-2013, 09:17 PM	#69
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting out Chevy C20 Cheyenne Custom Camper Guys I got alot of pics, I got quite a few parts off in the 2 hours I worked on it, I will try to get them posted later tonight, I need to see my kids for a few hours tonight. I'll be parting more tomorrow night. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-25-2013, 09:20 PM	#70
Youey Registered User Join Date: Oct 2013 Location: New Jersey Posts: 222	Re: Parting out Chevy C20 Cheyenne Custom Camper need a price on alternator bracket with hardware shipped to 08527

11-25-2013, 09:26 PM	#71
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting out Chevy C20 Cheyenne Custom Camper For the Alt bracket set $35 shipped __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-25-2013, 09:32 PM	#72
warbucket Registered User Join Date: Mar 2011 Location: Havertown Pa Posts: 392	Re: Parting out Chevy C20 Cheyenne Custom Camper warbucket, your first up on it Thanks Randy[/QUOTE] Cool, also may be interested in the steering column if tight and under dash support.

11-25-2013, 09:55 PM	#75
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: Parting out Chevy C20 Cheyenne Custom Camper Randy, I see Trevor took the inner grille, but if you find another one or more, I'd be interested. Could use good outers as well but would need to be as good as last one I got from you. __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

Register or Log In To remove these advertisements.