"Slowly but Surely" Big J's build thread... - Page 35 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

MiniD · 02-24-2010, 10:32 PM

It would have to go in the area where the speaker is housed. Not quite sure how you'd do it as there's no flat surfaces left. Look at most home stereo speakers and you'll see what is needed. There's almost always a 2" pvc pipe somewhere on the speaker. It's really just for that deep bass jug effect.

MiniD · 02-24-2010, 10:36 PM

Wikipedia rules:

http://en.wikipedia.org/wiki/Bass_reflex

Big J · 02-25-2010, 08:40 PM

Quote:

Originally Posted by MiniD

Wikipedia rules:

http://en.wikipedia.org/wiki/Bass_reflex

Thanks for the heads up.

Picked up a new to me dd the other night. 03 Silverado 1500HD 4x4. Its neat, heated leather, Bose, all the buttons. Its even got the 6.0. MPG isn't horrible, not great but not horrible.

**jamie72** · 02-25-2010, 11:00 PM

nice truck j, can`t wait to drive it...lol

Big J · 04-16-2010, 09:57 AM

OK, I'm tryin' to shift back into Blazer mode. I'm kickin' myself for not knockin' it out while I was off work. This new job is kinda like having 20 jobs rolled into one so its really been eating up all my time. Well not all it is summer now, mowing, weed eating, painting, staining, all that crap, lol.

I have managed to get some parts over to the powder coat guy and the Softopper top is on the way. The chrome was bad on the roll bar and spot light and the rubber stuff I used on the push bar just didn't look right. Hopefully I'll get back to work on it soon.

5150 · 04-17-2010, 08:23 AM

Looking sweet, you got 90 days or so before the show!!!!!!!!!!!!!!!

Big J · 04-18-2010, 12:56 PM

Quote:

Originally Posted by 5150

Looking sweet, you got 90 days or so before the show!!!!!!!!!!!!!!!

Yeah, its going to be easier to finish the Blazer then getting off work..... My weekend isn't on the weekend, lol. I'm on probation till Oct. 22nd. I'm going to try though.

5150 · 04-18-2010, 09:13 PM

I have faith in you

weaverterrence · 04-26-2010, 01:34 AM

You can do it!

Big J · 04-26-2010, 05:27 PM

Quote:

Originally Posted by 5150

I have faith in you

I'm trying to, lol.

Quote:

Originally Posted by weaverterrence

You can do it!

If I'd get off my ...

It took awhile but should be well worth the wait. They aren't slow, it was custom ordered. Not that I can mount it up yet but its nice to have it. I was able to order it without emblems on the sides but my order sheet said, "NO EMBLEMS". So maybe it won't have any. I'm happy that they would sell it to me that way too. I'm all for advertising but I wanted a clean look without being all badged up. Ya know I haven't said what "IT" is, lol. Its my soft top from Softopper.com. Yep they let me get it without badging. I'll be sending pics to them when its all done.

Big J · 05-27-2010, 01:02 AM

Finally found a few minutes this morning before work to wrench. Took the front calipers off, took the rear shoes off, got one side back together. I need to find some info on putting the front back together. I've got new front wheel joints to put in. I need the torque specs for the big nut behind the lock out. I found one caliper is broken, lol. They took it back anyways. Went ahead and put in new rear wheel cylinders too. I still have the rear drivers to put together and the back is done. Except for bleeding.

I didn't take the time to pretty it up behind the drum. I figure it'll look like it did in the first pic within' a few months anyways.

Big J · 05-27-2010, 01:32 PM

I forgot the camera today but more progress was made. Got the rear drums done except for a brake line I broke, lol. It looked original and refused to let go. Ran the lines to vent the gas tank too. I used the factory whatchamacallit thing that sits next to the fuel fill on the inside of the bed. Picked up a canister to put up front to hook it up to, just the canister, not the engine. Then I started tearing apart the front end.... Thats it until Tuesday.... Then back at it.

Big J · 06-30-2010, 10:38 AM

Got the brakes done, had to replace the master cylinder. It had went bad from sitting for so long. It only had 1 mile on it, lol. Maybe..... Replaced the u joints in the front axle too. Pulled the front diff cover to put one of those chrome for a month covers on, looks shiny for now. A big thanks goes out to jamie72 for coming over and helping get the brakes lined out. I need to build a door now! I was actually able to pull the Blazer up a couple feet and then back it up a couple! It was GREAT!

Thats the first time I've moved it under its own power since this phase of the build has started. Now for a door so I can drive it around the yard, lol. Workin' on it outside under the shade tree would be cool too. I need to bust out the pressure washer and do the frame and drive train, can't do that in the garage, lol.

The new seat is a little tall, kinda hard and will suck when going around a curve but it works

.

my67chevytruck · 06-30-2010, 10:57 AM

nice progress.

hgs_notes · 06-30-2010, 08:06 PM

Just change the seat wheels to those ones that have locks and you'll be good to go! Congrats on the very short drive. Way to let up on the brake pedal! Woohoo!

Chevyman63 · 07-01-2010, 05:20 AM

Cool seat!! Where can I get a couple?

5150 · 07-01-2010, 09:14 AM

very cool, hope to see you at the truck show. I know you probably won't be done in two weeks but hope you can make it down. Looking really good!!!

Big J · 07-13-2010, 11:51 PM

Quote:

Originally Posted by 5150

very cool, hope to see you at the truck show. I know you probably won't be done in two weeks but hope you can make it down. Looking really good!!!

Nope, gotta work, runnin' short and they won't let anyone off. SUCKS!

On a good note, I got the garage moved around a bit and built a door to actually get the blazer out. Drove it around the yard today for like an hour, lol. Got the seats in, just not bolted down, haha. Just need to fix a couple dings I missed, wet sand the whole thing with 600 and shoot some paint.

VA72C10 · 07-14-2010, 12:29 AM

looking good!!!

**Yukon Jack** · 07-14-2010, 10:59 AM

Very nice! Tire/rim combo fits it very well.

Alvin · 07-14-2010, 12:00 PM

Sweet! I'm doing Ethel's brakes this weekend. Hope my master cyl is still good.. it's been sitting awhile too.

**jamie72** · 07-14-2010, 05:11 PM

looking good,you need to finish paint so we can get to the`pretty` parts...lol

Big J · 07-20-2010, 02:20 AM

Worked on the interior panels today. Not what I was wanting to do but funds are short and I want it on the road. When I get the extra dough I'll pull them out and toss on some upholstery. Rustoleum roll on bed liner.

5150 · 07-20-2010, 09:02 AM

Looking good, missed you this weekend, but I know work is always in the way

vtblazer · 10-02-2010, 07:11 PM

Lookin' great J, cool to come back and see the progress!

The yellow looks awesome!

02-24-2010, 10:32 PM	#851
MiniD Registered User Join Date: Mar 2007 Location: Portland, OR Posts: 108	Re: "Slowly but Surely" Big J's build thread... It would have to go in the area where the speaker is housed. Not quite sure how you'd do it as there's no flat surfaces left. Look at most home stereo speakers and you'll see what is needed. There's almost always a 2" pvc pipe somewhere on the speaker. It's really just for that deep bass jug effect.

02-24-2010, 10:36 PM	#852
MiniD Registered User Join Date: Mar 2007 Location: Portland, OR Posts: 108	Re: "Slowly but Surely" Big J's build thread... Wikipedia rules: http://en.wikipedia.org/wiki/Bass_reflex

02-25-2010, 11:00 PM	#854
jamie72 Senior Member Join Date: Apr 2000 Location: madison indiana Posts: 3,839	Re: "Slowly but Surely" Big J's build thread... nice truck j, can`t wait to drive it...lol __________________ jamie72 72 BB cheyenne -- Restoration getting started.. member #807 http://www.myspace.com/whitetailobsession www.antlertalk.com

04-16-2010, 09:57 AM	#855
Big J Its lookin' like a Blazer! Join Date: Aug 2003 Location: Gods Country, KY Posts: 1,773	Re: "Slowly but Surely" Big J's build thread... OK, I'm tryin' to shift back into Blazer mode. I'm kickin' myself for not knockin' it out while I was off work. This new job is kinda like having 20 jobs rolled into one so its really been eating up all my time. Well not all it is summer now, mowing, weed eating, painting, staining, all that crap, lol. I have managed to get some parts over to the powder coat guy and the Softopper top is on the way. The chrome was bad on the roll bar and spot light and the rubber stuff I used on the push bar just didn't look right. Hopefully I'll get back to work on it soon. __________________ BAZINGA! My Build

04-17-2010, 08:23 AM	#856
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: "Slowly but Surely" Big J's build thread... Looking sweet, you got 90 days or so before the show!!!!!!!!!!!!!!! __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

04-18-2010, 09:13 PM	#858
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: "Slowly but Surely" Big J's build thread... I have faith in you __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

04-26-2010, 01:34 AM	#859
weaverterrence Registered User Join Date: Apr 2010 Location: Austin,Texas Posts: 12	Re: "Slowly but Surely" Big J's build thread... You can do it!

05-27-2010, 01:02 AM	#861
Big J Its lookin' like a Blazer! Join Date: Aug 2003 Location: Gods Country, KY Posts: 1,773	Re: "Slowly but Surely" Big J's build thread... Finally found a few minutes this morning before work to wrench. Took the front calipers off, took the rear shoes off, got one side back together. I need to find some info on putting the front back together. I've got new front wheel joints to put in. I need the torque specs for the big nut behind the lock out. I found one caliper is broken, lol. They took it back anyways. Went ahead and put in new rear wheel cylinders too. I still have the rear drivers to put together and the back is done. Except for bleeding. I didn't take the time to pretty it up behind the drum. I figure it'll look like it did in the first pic within' a few months anyways. __________________ BAZINGA! My Build Last edited by Big J; 05-27-2010 at 01:04 AM.

05-27-2010, 01:32 PM	#862
Big J Its lookin' like a Blazer! Join Date: Aug 2003 Location: Gods Country, KY Posts: 1,773	Re: "Slowly but Surely" Big J's build thread... I forgot the camera today but more progress was made. Got the rear drums done except for a brake line I broke, lol. It looked original and refused to let go. Ran the lines to vent the gas tank too. I used the factory whatchamacallit thing that sits next to the fuel fill on the inside of the bed. Picked up a canister to put up front to hook it up to, just the canister, not the engine. Then I started tearing apart the front end.... Thats it until Tuesday.... Then back at it. __________________ BAZINGA! My Build

06-30-2010, 10:38 AM	#863
Big J Its lookin' like a Blazer! Join Date: Aug 2003 Location: Gods Country, KY Posts: 1,773	Re: "Slowly but Surely" Big J's build thread... Got the brakes done, had to replace the master cylinder. It had went bad from sitting for so long. It only had 1 mile on it, lol. Maybe..... Replaced the u joints in the front axle too. Pulled the front diff cover to put one of those chrome for a month covers on, looks shiny for now. A big thanks goes out to jamie72 for coming over and helping get the brakes lined out. I need to build a door now! I was actually able to pull the Blazer up a couple feet and then back it up a couple! It was GREAT! Thats the first time I've moved it under its own power since this phase of the build has started. Now for a door so I can drive it around the yard, lol. Workin' on it outside under the shade tree would be cool too. I need to bust out the pressure washer and do the frame and drive train, can't do that in the garage, lol. The new seat is a little tall, kinda hard and will suck when going around a curve but it works. __________________ BAZINGA! My Build Last edited by Big J; 06-30-2010 at 10:39 AM.

06-30-2010, 10:57 AM	#864
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: "Slowly but Surely" Big J's build thread... nice progress. __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470

06-30-2010, 08:06 PM	#865
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,119	Re: "Slowly but Surely" Big J's build thread... Just change the seat wheels to those ones that have locks and you'll be good to go! Congrats on the very short drive. Way to let up on the brake pedal! Woohoo! __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff

07-01-2010, 05:20 AM	#866
Chevyman63 Can't wait to retire!! Join Date: Feb 2003 Location: Corunna, MI Posts: 1,575	Re: "Slowly but Surely" Big J's build thread... Cool seat!! Where can I get a couple? __________________ 2009 4x4 Chevy Crew Cab 6.0 1989 4x4 Siverado (270,000 miles) 1972 4x4 Blazer 2007 Chevy Cutaway 1 ton 1970 Corvette (sons project) RIP - CLR 10/11/09

07-01-2010, 09:14 AM	#867
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: "Slowly but Surely" Big J's build thread... very cool, hope to see you at the truck show. I know you probably won't be done in two weeks but hope you can make it down. Looking really good!!! __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

07-14-2010, 12:29 AM	#869
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: "Slowly but Surely" Big J's build thread... looking good!!! __________________ Looking for a 67-72 swb or blazer project in or around VA.



Register or Log In To remove these advertisements.

07-14-2010, 10:59 AM	#870
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,683	Re: "Slowly but Surely" Big J's build thread... Very nice! Tire/rim combo fits it very well. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

07-14-2010, 12:00 PM	#871
Alvin Never Done? Join Date: May 2000 Location: Ohio Posts: 1,435	Re: "Slowly but Surely" Big J's build thread... Sweet! I'm doing Ethel's brakes this weekend. Hope my master cyl is still good.. it's been sitting awhile too. __________________ Ethel - The Legend Continues... Ethel has been sold.

07-14-2010, 05:11 PM	#872
jamie72 Senior Member Join Date: Apr 2000 Location: madison indiana Posts: 3,839	Re: "Slowly but Surely" Big J's build thread... looking good,you need to finish paint so we can get to the`pretty` parts...lol __________________ jamie72 72 BB cheyenne -- Restoration getting started.. member #807 http://www.myspace.com/whitetailobsession www.antlertalk.com

07-20-2010, 02:20 AM	#873
Big J Its lookin' like a Blazer! Join Date: Aug 2003 Location: Gods Country, KY Posts: 1,773	Re: "Slowly but Surely" Big J's build thread... Worked on the interior panels today. Not what I was wanting to do but funds are short and I want it on the road. When I get the extra dough I'll pull them out and toss on some upholstery. Rustoleum roll on bed liner. __________________ BAZINGA! My Build Last edited by Big J; 07-20-2010 at 02:21 AM.

07-20-2010, 09:02 AM	#874
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: "Slowly but Surely" Big J's build thread... Looking good, missed you this weekend, but I know work is always in the way __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

10-02-2010, 07:11 PM	#875
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,538	Re: "Slowly but Surely" Big J's build thread... Lookin' great J, cool to come back and see the progress! The yellow looks awesome!

Register or Log In To remove these advertisements.