Project "My Happy Mess" - Page 39 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

litew8 · 10-24-2013, 08:52 PM

I have a runner up for the chrome trim - Aluminum Foil tape.
Thinnest I could find is 1.2 mil

Worth a try.

litew8 · 10-25-2013, 03:21 PM

Random pics

Spot the Blue Jay

More horses

Since the horses bench seat cover won't fit, we did the next best thing.
My brother painted them on!

Looks great!

**Dieselwrencher** · 10-25-2013, 03:37 PM

Nice murral.

I always wondered what people could use for that little trim. I think 3m used to have a chrome pin stripe. I remember using that on a 68 chevelle door panel when I used to work in a body shop.

litew8 · 10-25-2013, 07:39 PM

I'm not sure actual pinstripe would work since the pieces have curves.
I need something that'll conform easily and wrap.

litew8 · 10-28-2013, 03:37 PM

Looks like a pheasant?

Spot the Robin.

One more time.

Interior pieces, before.

Painted. Turned out great!

**oldman3** · 10-28-2013, 07:31 PM

Interior pieces look great....Jim

litew8 · 10-28-2013, 11:26 PM

Thank you sir!

I bet some were wondering if they'd turn out good after being sandblasted

I'll install them tomorrow. After that (a day or two, rain forecast for Wed.), it should be a good time to take a trip to the alignment store.

mcbassin · 10-29-2013, 08:44 AM

Interior pieces look new. Nice work

litew8 · 10-29-2013, 03:55 PM

Thanks Mike.

Welded exhaust up -

Door panels installed.

**oldman3** · 10-29-2013, 11:24 PM

Looking good...Jim

johnlq6975 · 10-29-2013, 11:57 PM

Keep taking pictures

litew8 · 10-30-2013, 11:44 AM

I'm going to try and get the front bumper on today.

litew8 · 10-30-2013, 03:48 PM

Not my pet or friend, little sumab!tch

**Dieselwrencher** · 10-30-2013, 07:43 PM

Darn varmits!

It keeps getting better with each piece!

litew8 · 10-30-2013, 10:14 PM

Thanks!

That little idiot (raccoon) would have sat there and stared at me even if I were holding a rifle pointed at its head instead of my camcorder.
This is a little guy, they come around twice/three times bigger - looking for grubs in my backyard.

**oldman3** · 10-30-2013, 11:11 PM

Front end looks super...Jim

litew8 · 10-31-2013, 03:00 PM

Thanks Jim, now we can concentrate on these

mcbassin · 10-31-2013, 04:53 PM

Quote:

Originally Posted by litew8

Thanks Jim, now we can concentrate on these

Wow! you dropped some change on those pieces. I never noticed you hadn't done the bed restoration yet.

litew8 · 10-31-2013, 07:11 PM

Yeah, two years ago! It was a necessary evil since the originals busted out with rust.
I figured buying new was the best option (less work etc...).
They've been hiding out back all this time. Wood floor and NOS rear wheel wells too.
Bedsides are the only pieces made in china. Everything else (less bumpers I think): ORIGINAL 1970's US metal.

**oldman3** · 10-31-2013, 11:37 PM

Will be interested in what you have to say about the bedsides, I've heard good and bad things about the fit...Jim

litew8 · 10-31-2013, 11:44 PM

As for the 'bad things', something we'd be able to hammer out?

litew8 · 11-01-2013, 03:07 PM

Okay, we'll pretend there are no 'bad things' then.
So far we don't see any issues test fitting the sides.

**oldman3** · 11-01-2013, 07:26 PM

From what I see in the pics, looks like the panel lines--line up good...Jim

litew8 · 11-01-2013, 07:47 PM

We were looking for erroneous stamping or equivelent I guess. We don't want to proceed with paint if something is the matter. It's been so long since we've disassembled, we're pretty much winging reassembly at this point

The piece of wood we used as a spacer, is a little thicker than the bed wood, but not by much. The back ends of the bedsides bolt up and are stationary, whereas the front ends have a bit of play due to not being tied in/ secured accordingly. Guess we'll see in the end (tailgate, etc...).

I'll admit, it's getting a little more exciting seeing the bedsides up - invisioning the wood filling the rest, soon.

litew8 · 11-02-2013, 03:45 PM

Link: Pics of our trucks - payload

10-24-2013, 08:52 PM	#951
litew8 Registered User Join Date: Jul 2011 Location: Des Moines, Iowa Posts: 3,016	Re: Project "My Happy Mess" I have a runner up for the chrome trim - Aluminum Foil tape. Thinnest I could find is 1.2 mil Worth a try. __________________ project: "my happy mess"

10-25-2013, 03:21 PM	#952
litew8 Registered User Join Date: Jul 2011 Location: Des Moines, Iowa Posts: 3,016	Re: Project "My Happy Mess" Random pics Spot the Blue Jay More horses Since the horses bench seat cover won't fit, we did the next best thing. My brother painted them on! Looks great! __________________ project: "my happy mess"

10-25-2013, 03:37 PM	#953
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,141	Re: Project "My Happy Mess" Nice murral. I always wondered what people could use for that little trim. I think 3m used to have a chrome pin stripe. I remember using that on a 68 chevelle door panel when I used to work in a body shop. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

10-25-2013, 07:39 PM	#954
litew8 Registered User Join Date: Jul 2011 Location: Des Moines, Iowa Posts: 3,016	Re: Project "My Happy Mess" I'm not sure actual pinstripe would work since the pieces have curves. I need something that'll conform easily and wrap. __________________ project: "my happy mess"

10-28-2013, 03:37 PM	#955
litew8 Registered User Join Date: Jul 2011 Location: Des Moines, Iowa Posts: 3,016	Re: Project "My Happy Mess" Looks like a pheasant? Spot the Robin. One more time. Interior pieces, before. Painted. Turned out great! __________________ project: "my happy mess"

10-28-2013, 07:31 PM	#956
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,555	Re: Project "My Happy Mess" Interior pieces look great....Jim __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

10-28-2013, 11:26 PM	#957
litew8 Registered User Join Date: Jul 2011 Location: Des Moines, Iowa Posts: 3,016	Re: Project "My Happy Mess" Thank you sir! I bet some were wondering if they'd turn out good after being sandblasted I'll install them tomorrow. After that (a day or two, rain forecast for Wed.), it should be a good time to take a trip to the alignment store. __________________ project: "my happy mess"

10-29-2013, 08:44 AM	#958
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: Project "My Happy Mess" Interior pieces look new. Nice work __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

10-29-2013, 03:55 PM	#959
litew8 Registered User Join Date: Jul 2011 Location: Des Moines, Iowa Posts: 3,016	Re: Project "My Happy Mess" Thanks Mike. Welded exhaust up - Door panels installed. __________________ project: "my happy mess"

10-29-2013, 11:24 PM	#960
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,555	Re: Project "My Happy Mess" Looking good...Jim __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

10-29-2013, 11:57 PM	#961
johnlq6975 Registered User Join Date: Oct 2013 Location: Pryor Oklahoma Posts: 29	Re: Project "My Happy Mess" Keep taking pictures

10-30-2013, 11:44 AM	#962
litew8 Registered User Join Date: Jul 2011 Location: Des Moines, Iowa Posts: 3,016	Re: Project "My Happy Mess" I'm going to try and get the front bumper on today. __________________ project: "my happy mess"

10-30-2013, 03:48 PM	#963
litew8 Registered User Join Date: Jul 2011 Location: Des Moines, Iowa Posts: 3,016	Re: Project "My Happy Mess" Not my pet or friend, little sumab!tch __________________ project: "my happy mess"

10-30-2013, 07:43 PM	#964
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,141	Re: Project "My Happy Mess" Darn varmits! It keeps getting better with each piece! __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

10-30-2013, 10:14 PM	#965
litew8 Registered User Join Date: Jul 2011 Location: Des Moines, Iowa Posts: 3,016	Re: Project "My Happy Mess" Thanks! That little idiot (raccoon) would have sat there and stared at me even if I were holding a rifle pointed at its head instead of my camcorder. This is a little guy, they come around twice/three times bigger - looking for grubs in my backyard. __________________ project: "my happy mess"



Register or Log In To remove these advertisements.

10-30-2013, 11:11 PM	#966
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,555	Re: Project "My Happy Mess" Front end looks super...Jim __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

10-31-2013, 03:00 PM	#967
litew8 Registered User Join Date: Jul 2011 Location: Des Moines, Iowa Posts: 3,016	Re: Project "My Happy Mess" Thanks Jim, now we can concentrate on these __________________ project: "my happy mess"

10-31-2013, 07:11 PM	#969
litew8 Registered User Join Date: Jul 2011 Location: Des Moines, Iowa Posts: 3,016	Re: Project "My Happy Mess" Yeah, two years ago! It was a necessary evil since the originals busted out with rust. I figured buying new was the best option (less work etc...). They've been hiding out back all this time. Wood floor and NOS rear wheel wells too. Bedsides are the only pieces made in china. Everything else (less bumpers I think): ORIGINAL 1970's US metal. __________________ project: "my happy mess"

10-31-2013, 11:37 PM	#970
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,555	Re: Project "My Happy Mess" Will be interested in what you have to say about the bedsides, I've heard good and bad things about the fit...Jim __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

10-31-2013, 11:44 PM	#971
litew8 Registered User Join Date: Jul 2011 Location: Des Moines, Iowa Posts: 3,016	Re: Project "My Happy Mess" As for the 'bad things', something we'd be able to hammer out? __________________ project: "my happy mess"

11-01-2013, 03:07 PM	#972
litew8 Registered User Join Date: Jul 2011 Location: Des Moines, Iowa Posts: 3,016	Re: Project "My Happy Mess" Okay, we'll pretend there are no 'bad things' then. So far we don't see any issues test fitting the sides. __________________ project: "my happy mess"

11-01-2013, 07:26 PM	#973
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,555	Re: Project "My Happy Mess" From what I see in the pics, looks like the panel lines--line up good...Jim __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

11-01-2013, 07:47 PM	#974
litew8 Registered User Join Date: Jul 2011 Location: Des Moines, Iowa Posts: 3,016	Re: Project "My Happy Mess" We were looking for erroneous stamping or equivelent I guess. We don't want to proceed with paint if something is the matter. It's been so long since we've disassembled, we're pretty much winging reassembly at this point The piece of wood we used as a spacer, is a little thicker than the bed wood, but not by much. The back ends of the bedsides bolt up and are stationary, whereas the front ends have a bit of play due to not being tied in/ secured accordingly. Guess we'll see in the end (tailgate, etc...). I'll admit, it's getting a little more exciting seeing the bedsides up - invisioning the wood filling the rest, soon. __________________ project: "my happy mess" Last edited by litew8; 11-01-2013 at 07:59 PM.

11-02-2013, 03:45 PM	#975
litew8 Registered User Join Date: Jul 2011 Location: Des Moines, Iowa Posts: 3,016	Re: Project "My Happy Mess" Link: Pics of our trucks - payload __________________ project: "my happy mess"

Register or Log In To remove these advertisements.