OR Parting 1965 Chevy C20 Flatbed

[72chevyrick]

Any of the side moldings left

[rickoner]

Do you have the lower rad saddles on the frame? If it matters, mines for a 6 cyl. Thanks.

[DLTruck1973]

Originally Posted by rickoner

Do you have the lower rad saddles on the frame? If it matters, mines for a 6 cyl. Thanks.

I need to know what 6 cyl you have. There are only 2 options, big or small tank. I believe 292's may be big like V8's are.

Do you need the rubbers with them as well?

Let me know and I will see what I can do.

Thank you,
Thomas

[DLTruck1973]

Originally Posted by 72chevyrick

Any of the side moldings left

Are you looking for any specific pieces? I have a few of these trucks, all long box and most of the trim is in poor condition. If you have any specific needs, I can check.

Let me know and thank you for the interest
Thomas

[KVB]

I am looking for the parking brake crossmember for a 65 GMC short wide.

Would you have one of those?

Cost with shipping to 28553

Thanks

Ken

[DLTruck1973]

Originally Posted by KVB

I am looking for the parking brake crossmember for a 65 GMC short wide.

Would you have one of those?

Cost with shipping to 28553

Thanks

Ken

Ken,

I have nothing available at this time. This is a automatic trans cross member and hard to find.

[of13swc]

did the door panels sale?

[DLTruck1973]

Originally Posted by of13swc

did the door panels sale?

Yes they did but let me check if I have another pair here for you. Do you need one with arm rest holes or no arm rest holes?

I will get back with you soon,

Thank you for the interest,
Thomas

[of13swc]

does not matter to me. Thank you

Originally Posted by DLTruck1973

Yes they did but let me check if I have another pair here for you. Do you need one with arm rest holes or no arm rest holes?

I will get back with you soon,

Thank you for the interest,
Thomas

[DLTruck1973]

Originally Posted by of13swc

does not matter to me. Thank you

I do have a couple of other sets of these. All the drivers have arm rest holes. I have one passenger with arm rest holes and one without.

I need $75.00 for the pair plus shipping. Nice condition but will need paint. I can offer to hot tank and acid dip them free of charge if interested.

Let me know and I will post photos and get you a shipping quote. I will have to pull them from the truck as well.

Thank you for the interest,
Thomas

[of13swc]

Can you please post some pictures? Thanks again

Originally Posted by DLTruck1973

I do have a couple of other sets of these. All the drivers have arm rest holes. I have one passenger with arm rest holes and one without.

I need $75.00 for the pair plus shipping. Nice condition but will need paint. I can offer to hot tank and acid dip them free of charge if interested.

Let me know and I will post photos and get you a shipping quote. I will have to pull them from the truck as well.

Thank you for the interest,
Thomas

[Pwalrus]

Do you still have the drivers side vent window knob? I'm in need of one here in CA! please let me know if it's available. Thank you!

[DLTruck1973]

Originally Posted by Pwalrus

Do you still have the drivers side vent window knob? I'm in need of one here in CA! please let me know if it's available. Thank you!

All of the ones I have are in very poor condition (pitted). If one comes up in decent condition, I will let you know.

Thank you,
Thomas

[Pwalrus]

Originally Posted by DLTruck1973

All of the ones I have are in very poor condition (pitted). If one comes up in decent condition, I will let you know.

Thank you,
Thomas

Thanks! I'm not going for a full resto, so if they're working and they're cheap it's better than my not having one at all! Drop me a line if you've got one you think is worth taking off and shipping over

[of13swc]

can you post some pictures of the inner door panels you have?

[DLTruck1973]

Originally Posted by of13sdc

can you post some pictures of the inner door panels you have?

Here are photos of what I have. There are 2 drivers sides and one passenger side. The loose one is from a truck that did not have a matching passenger side.

Let me know and thank you for the interest,
Thomas

[of13swc]

The two in the bottom pictures look in pretty good shape. what would you want for them plus the ride to 32003.

Originally Posted by DLTruck1973

Here are photos of what I have. There are 2 drivers sides and one passenger side. The loose one is from a truck that did not have a matching passenger side.

Let me know and thank you for the interest,
Thomas

[DLTruck1973]

Originally Posted by of13swc

The two in the bottom pictures look in pretty good shape. what would you want for them plus the ride to 32003.

Price is $75.00 for the pair plus shipping. I can get you a shipping quote soon, if not today it will be Monday. We are not open on the weekends.

I will let you know.

Thank you,
Thomas

[oldtrux]

hi,i'm looking for a v8 upper rad bracket for my 66.thx dan

[64jmb]

Originally Posted by DLTruck1973

Here are photos of what I have. There are 2 drivers sides and one passenger side. The loose one is from a truck that did not have a matching passenger side.

Let me know and thank you for the interest,
Thomas

Do you have that fawn gold arm rest still? I am looking for one... Let me know. thanks

[amadioranch]

Is this a dump bed? If so how much for ram and PTO parts. Someone junked these parts off my dump bed before I bought it.

[Paul Y]

Gents,

What is the condition of the drivers side B pillar and would you be willing to part out the cab?

Many thanks,

P.

[DLTruck1973]

Originally Posted by Paul Y

Gents,

What is the condition of the drivers side B pillar and would you be willing to part out the cab?

Many thanks,

P.

That cab is long gone but I do have another cab I can make that cut from.

I need to know how much of it you need? Roof panel to rocker? How much cab metal do you need with it, etc?

Let me know and I can get you an accurate price shipped. Zip code as well.

Thank you for the interest,
Thomas

[Paul Y]

Thomas,

I am looking for a piece that is from beneath the fuel filler to about 12" along the rocker and about the same on the back of the cab.

Have a picture that better illustrates what I need, will post it up tomorrow, but an estimate on price would be a good place to start. Need to make it as compact as possible for when I ship it too the UK!

Would need you to ship to 94070, I will take it from there.

Many thanks,

P.

[DLTruck1973]

Originally Posted by Paul Y

Thomas,

I am looking for a piece that is from beneath the fuel filler to about 12" along the rocker and about the same on the back of the cab.

Have a picture that better illustrates what I need, will post it up tomorrow, but an estimate on price would be a good place to start. Need to make it as compact as possible for when I ship it too the UK!

Would need you to ship to 94070, I will take it from there.

Many thanks,

P.

I will wait for your photo and see what we can do. I cannot even begin to guess at shipping. The zip you provided is not that far from here so that will help.

Thank you,
Thomas