How many 4wd Suburban guys do we have?

[thirdstreettito]

Careful cvalcore, you'll be tightening the coupler bolts in your column in no time. Ask me how I know

[cvalcore]

ah the wheel has been tightened once before the 10" its been staying tight so far. my wife use to complane about it she wants me to put steps on it but she gets up there just as fast as i do now.

[zaccaglin]

My old girl

Dirty:


And Clean:

Well "Cleaner" :P

[63chevyll]

Man, some nice looking burbs. I have one of them there 85 suburbans, but can't post a picture.
Posted via Mobile Device

[randawesome]

heres another

[y5mgisi]

Few of my 5.3 burb.





Back when i had the lift and big tires on,



My old burb,



and the pair when they were together.

[greguw]

Posted mine early on and since it has made some progress ....

[justcuz]

Originally Posted by y5mgisi

Few of my 5.3 burb.





Back when i had the lift and big tires on,



My old burb,



and the pair when they were together.

What was the lift and the tire size on the old silver and blue one? Looks like you put a set of F-250 aluminum wheels on it.

[LiveAnimals]

Originally Posted by y5mgisi

My old burb

What is the lift and wheel/tire specs on this beauty?
Posted via Mobile Device

[Mr. 250r]

Slowly but surely finishing up the lost interest in my 6.0 swap hoping to take it mudding soon sometimes I wish the 350 never left as it served more than faithfully
Posted via Mobile Device

[greguw]

I see so many unfinished projects out there ... I'm down to painting the axles and parts of the chassis and sanding and rubbing the paint .
Getter done to quote the Larry the Cable Guy !

[68Timber]

Originally Posted by greguw

I see so many unfinished projects out there ... I'm down to painting the axles and parts of the chassis and sanding and rubbing the paint .
Getter done to quote the Larry the Cable Guy !

Time and money, always seems I have plenty of one and none of the other. I will be able to do engine and interior projects on both trucks this year but no paint jobs are planned.

[Jsfucttruck]

New lift on the older one.
78 K20
Dana 60/ 14bff
350ci/sm465/np205
4" Front spring/4" rear spring w/ 4" block kit.

[kwin]

I just bought three , ill post pictures as soon as i get them home.

[TheApocalyptican]

Here's my '90:





Ignore the white wheel....it's the spare. Had the normal tire on there bulge on me. Getting new tires on either Monday or Tuesday.
Also....the white around the rear windows is where I haven't finished painting yet. Rather than mask of the windows, and weatherstripping I am going to wait until I replace the weatherstripping and window motors. Did the fronts this way, and it made it so much simpler.

[Mil-Spec]

Here's my former FD 1979 K20, 350/TH400, Doug Nash Engineering Equip. Part-Time 4WD conversion. 4 inch RC lift with 36" HMMVEE Tires, GM 10 Bolt & 14 bolt FF with 3.73.

Crappy pic i know, but this is it's good side

[csa daddy]

my 91 started life as a 1/2 ton now shes a ton with a 6 inch lift with 4;56s front an rear 6.2 diesel with 700r4 15x14 bart wheels an 35x15x15 swampers. still a work in progress but plan to be done before july this year just need a couple more parts

[USSkoval]

Originally Posted by csa daddy

my 91 started life as a 1/2 ton now shes a ton with a 6 inch lift with 4;56s front an rear 6.2 diesel with 700r4 15x14 bart wheels an 35x15x15 swampers. still a work in progress but plan to be done before july this year just need a couple more parts

Looking good! It's crazy how wide those tires look on the wide rims. I used to run the same size SX's but they were on stock 15x8 rallies, they looked half as wide as yours.

[csa daddy]

Originally Posted by USSkoval

Looking good! It's crazy how wide those tires look on the wide rims. I used to run the same size SX's but they were on stock 15x8 rallies, they looked half as wide as yours.

Thanks Andy an thanks again for the shocks still need to sand an paint them . An yeah those 15x14 splay the tire out real good almost completely flat when aired up. Makes for good contact area lol. Still need to get a non neck down driver side axel shaft an steering block an my 60 will be done after I clean the knuckles an reassemble everything can't wait
Posted via Mobile Device

[thinkformyself]

my former 89 burb

my current 87 under construction


full build thread in swedish here: www.anderssonracing.com/4x4.htm
full build thread in english here: http://coloradok5.com/forums/showthread.php?t=248032

[silverbullet01]

here is my 1984 3/4 ton ex rcmp. 2 in. lift, 33 12.50 16.5, 350 4 barrel, was th400, but swapped in a 700r4... 208 case, 14 full floater rear, 10 bolt front, 373 ratio.. have 7.5 foot fisher plow too

[mr.chevyblack]

my 1989 chevy suburban cummins dana 60 595rwhp 1565 rwtq 37-13.5-18 own it for 11yrs

[DirtyLarry]

My Polar Bear burb…. Thread here



NV4500


TBI 5.7L will do for now

[Edahall]

1990 Chevy Suburban, Cummins 6BT, NV5600, recently painted

[Cherub]

Im glad to now be a 4x4 suburban owner