VA 69/70 4wd gmc jimmy parts f/s - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**pound41** · 02-20-2011, 12:12 AM

Bill:
What about the bed floor that is left after you removed the rear quarters is it rusted
Thanks

billsbowtie · 02-20-2011, 01:37 AM

i will check it out next time i get to work on it.

**jimer1964** · 02-20-2011, 10:33 AM

hi bill looks good i will take it do you think you could come up with a ring to hold the boot down? send me you payment info thanks

billsbowtie · 02-21-2011, 10:32 PM

george here is the worst lookig spots . if you want it for $35.00 i will send it with joe next time he stops by.

billsbowtie · 02-21-2011, 10:32 PM

billsbowtie · 02-21-2011, 11:47 PM

ASEASIDER here is the roll bar.

billsbowtie · 02-21-2011, 11:48 PM

billsbowtie · 02-21-2011, 11:50 PM

under neith bed floor.

billsbowtie · 02-22-2011, 12:30 AM

upper bed floor.

billsbowtie · 02-22-2011, 12:31 AM

billsbowtie · 02-22-2011, 12:32 AM

billsbowtie · 02-22-2011, 12:34 AM

billsbowtie · 02-22-2011, 08:04 PM

VA72C10 here are all the parts you ask about that i have. there is a extra door latch/rod set. parts in red are not to good i will give them to you if you want them with other parts. parts in blue look ok.does $80.00 shipped to you sound good? i don't want to take tailgate parts out yet. i have a new handel not sure if it is after market or nos it was laying in a truck i got a while back it's not in pic.

billsbowtie · 02-22-2011, 08:05 PM

VA72C10 · 02-22-2011, 08:11 PM

Thanks for the pictures

would the 80 include the handle? How is that rubber channel piece that's in the red circled area?

billsbowtie · 02-22-2011, 08:28 PM

it looks useable but has a tear in the rubber channel piece. i would like $90.00 shipped with the handel i will get a pic. of it.

billsbowtie · 02-22-2011, 09:33 PM

heres the handle it may not be new but it looks good. it looked like it had a sticker on it . and like i said earlier it was just laying in a truck i got.

VA72C10 · 02-22-2011, 09:35 PM

Quote:

Originally Posted by billsbowtie

it looks useable but has a tear in the rubber channel piece. i would like $90.00 shipped with the handel i will get a pic. of it.

Sounds good. If you can pm your paypal address again I'll get you paid.

billsbowtie · 02-22-2011, 09:42 PM

billsbowtie · 02-22-2011, 09:42 PM

sending pm.

VA72C10 · 02-22-2011, 09:49 PM

paypal sent. thanks

rsavage · 02-22-2011, 11:25 PM

I'll take the metal radiator hose. Please pm me with paypal info. Thanks, Rick

billsbowtie · 02-23-2011, 12:16 AM

VA72C10 i got payment. i have parts boxed up i had a little room left in the box so i threw a few more things in there to make you a good box of parts.

VA72C10 · 02-23-2011, 12:24 AM

Quote:

Originally Posted by billsbowtie

VA72C10 i got payment. i have parts boxed up i had a little room left in the box so i threw a few more things in there to make you a good box of parts.

Thank you! I appreciate the extras

rsavage · 02-23-2011, 07:53 AM

Bill,
Paypal payment sent. Rick

02-20-2011, 12:12 AM	#76
pound41 Registered User Join Date: Dec 2002 Location: Northern Virginia Posts: 1,269	Re: 69/70 4wd gmc jimmy parts f/s Bill: What about the bed floor that is left after you removed the rear quarters is it rusted Thanks

02-20-2011, 01:37 AM	#77
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 69/70 4wd gmc jimmy parts f/s i will check it out next time i get to work on it. __________________ i have 67/72 chevy truck parts f/s.

02-20-2011, 10:33 AM	#78
jimer1964 Senior Member Join Date: Jan 2007 Location: bowmansville,pa Posts: 1,679	Re: 69/70 4wd gmc jimmy parts f/s hi bill looks good i will take it do you think you could come up with a ring to hold the boot down? send me you payment info thanks

02-21-2011, 10:32 PM	#79
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 69/70 4wd gmc jimmy parts f/s george here is the worst lookig spots . if you want it for $35.00 i will send it with joe next time he stops by. __________________ i have 67/72 chevy truck parts f/s.

02-21-2011, 10:32 PM	#80
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 69/70 4wd gmc jimmy parts f/s __________________ i have 67/72 chevy truck parts f/s.

02-21-2011, 11:47 PM	#81
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 69/70 4wd gmc jimmy parts f/s ASEASIDER here is the roll bar. __________________ i have 67/72 chevy truck parts f/s.

02-21-2011, 11:48 PM	#82
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 69/70 4wd gmc jimmy parts f/s __________________ i have 67/72 chevy truck parts f/s.

02-21-2011, 11:50 PM	#83
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 69/70 4wd gmc jimmy parts f/s under neith bed floor. __________________ i have 67/72 chevy truck parts f/s.

02-22-2011, 12:30 AM	#84
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 69/70 4wd gmc jimmy parts f/s upper bed floor. __________________ i have 67/72 chevy truck parts f/s.

02-22-2011, 12:31 AM	#85
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 69/70 4wd gmc jimmy parts f/s __________________ i have 67/72 chevy truck parts f/s.

02-22-2011, 12:32 AM	#86
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 69/70 4wd gmc jimmy parts f/s __________________ i have 67/72 chevy truck parts f/s.

02-22-2011, 12:34 AM	#87
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 69/70 4wd gmc jimmy parts f/s __________________ i have 67/72 chevy truck parts f/s.

02-22-2011, 08:04 PM	#88
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 69/70 4wd gmc jimmy parts f/s VA72C10 here are all the parts you ask about that i have. there is a extra door latch/rod set. parts in red are not to good i will give them to you if you want them with other parts. parts in blue look ok.does $80.00 shipped to you sound good? i don't want to take tailgate parts out yet. i have a new handel not sure if it is after market or nos it was laying in a truck i got a while back it's not in pic. __________________ i have 67/72 chevy truck parts f/s.

02-22-2011, 08:05 PM	#89
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 69/70 4wd gmc jimmy parts f/s __________________ i have 67/72 chevy truck parts f/s.

02-22-2011, 08:11 PM	#90
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: 69/70 4wd gmc jimmy parts f/s Thanks for the pictures would the 80 include the handle? How is that rubber channel piece that's in the red circled area? __________________ Looking for a 67-72 swb or blazer project in or around VA. Last edited by VA72C10; 02-22-2011 at 08:12 PM.



Register or Log In To remove these advertisements.

02-22-2011, 08:28 PM	#91
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 69/70 4wd gmc jimmy parts f/s it looks useable but has a tear in the rubber channel piece. i would like $90.00 shipped with the handel i will get a pic. of it. __________________ i have 67/72 chevy truck parts f/s.

02-22-2011, 09:33 PM	#92
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 69/70 4wd gmc jimmy parts f/s heres the handle it may not be new but it looks good. it looked like it had a sticker on it . and like i said earlier it was just laying in a truck i got. __________________ i have 67/72 chevy truck parts f/s.

02-22-2011, 09:42 PM	#94
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 69/70 4wd gmc jimmy parts f/s __________________ i have 67/72 chevy truck parts f/s.

02-22-2011, 09:42 PM	#95
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 69/70 4wd gmc jimmy parts f/s sending pm. __________________ i have 67/72 chevy truck parts f/s.

02-22-2011, 09:49 PM	#96
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: 69/70 4wd gmc jimmy parts f/s paypal sent. thanks __________________ Looking for a 67-72 swb or blazer project in or around VA.

02-22-2011, 11:25 PM	#97
rsavage Registered User Join Date: Aug 2009 Location: Alden NY Posts: 2,705	Re: 69/70 4wd gmc jimmy parts f/s I'll take the metal radiator hose. Please pm me with paypal info. Thanks, Rick __________________ 1961 C1 Corvette 1959 El Camino 350 TPI, 9" 4 w disc 69 Blazer K5 - sold July '20 2021 Durango RT 5.7

02-23-2011, 12:16 AM	#98
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 69/70 4wd gmc jimmy parts f/s VA72C10 i got payment. i have parts boxed up i had a little room left in the box so i threw a few more things in there to make you a good box of parts. __________________ i have 67/72 chevy truck parts f/s.

02-23-2011, 07:53 AM	#100
rsavage Registered User Join Date: Aug 2009 Location: Alden NY Posts: 2,705	Re: 69/70 4wd gmc jimmy parts f/s Bill, Paypal payment sent. Rick __________________ 1961 C1 Corvette 1959 El Camino 350 TPI, 9" 4 w disc 69 Blazer K5 - sold July '20 2021 Durango RT 5.7

Register or Log In To remove these advertisements.