OR 1972 C10 Parting - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

DLTruck1973 · 05-16-2015, 03:06 PM

Quote:

Originally Posted by Chevy Fan Always

I will take the manifolds. if I take the sway bar what would the total be for sipping with it added?

44805
Mike

Hi Mike,

I will figure out a shipping quote for everything on Monday. It may be better in two packages but I will let you know for sure.

Thank you very much,
Thomas

DLTruck1973 · 05-18-2015, 06:47 PM

Quote:

Originally Posted by Chevy Fan Always

I will take the manifolds. if I take the sway bar what would the total be for sipping with it added?

44805
Mike

Hi Mike,

It will be better to package in two packages. The sway bar will cost $40.00 to ship so $90.00 total on that plus the price of the manifolds shipped at $165.00 for a new total of $255.00

Let me know and I can get everything ready to ship for you.

Thank you,
Thomas

**Chevy Fan Always** · 05-19-2015, 07:33 AM

Quote:

Originally Posted by DLTruck1973

Hi Mike,

It will be better to package in two packages. The sway bar will cost $40.00 to ship so $90.00 total on that plus the price of the manifolds shipped at $165.00 for a new total of $255.00

Let me know and I can get everything ready to ship for you.

Thank you,
Thomas

Sounds good, send me your Paypal.

Mike

kcsa75 · 05-15-2015, 11:58 AM

Thomas, thanks for posting addition photos on the trim, but I'm going to pass.

Thanks again.

Mr Handy · 05-15-2015, 06:35 PM

brake/clutch pedal assembly...$ 45.00
2wd 4 speed (SM465) floor hump...$ 35.00
4 speed (SM465) shift handle with boot and ring and handle, very minor tear in boot, under fold...$ 40.00
complete clutch pedal linkage from clutch pedal to throw out fork, including the frame bracket and return spring...$65.00
clutch/brake pedal stop bracket...$ 10.00
steering column, black for 4 speed, decent driver condition...$85.00
Complete drive line with center bearing bracket for 127 inch wheel base, small block with SM465 trans. Comes with bracket for cross member...$ 75.00
1 small block 4 speed transmission cross members nice and clean...$ 65.00

Zip for business address is 34677

DLTruck1973 · 05-15-2015, 06:39 PM

Quote:

Originally Posted by Mr Handy

brake/clutch pedal assembly...$ 45.00
2wd 4 speed (SM465) floor hump...$ 35.00
4 speed (SM465) shift handle with boot and ring and handle, very minor tear in boot, under fold...$ 40.00
complete clutch pedal linkage from clutch pedal to throw out fork, including the frame bracket and return spring...$65.00
clutch/brake pedal stop bracket...$ 10.00
steering column, black for 4 speed, decent driver condition...$85.00
Complete drive line with center bearing bracket for 127 inch wheel base, small block with SM465 trans. Comes with bracket for cross member...$ 75.00
1 small block 4 speed transmission cross members nice and clean...$ 65.00

Zip for business address is 34677

Ok, I will work on shipping quote. May be Monday before I can get it worked up. 34677 to a business, correct?

I will check freight with a pallet and UPS with multiple packages and see which is more economical for you.

I will get back with you soon,.

Thank you,
Thomas

DLTruck1973 · 05-15-2015, 07:28 PM

Quote:

Originally Posted by Mr Handy

brake/clutch pedal assembly...$ 45.00
2wd 4 speed (SM465) floor hump...$ 35.00
4 speed (SM465) shift handle with boot and ring and handle, very minor tear in boot, under fold...$ 40.00
complete clutch pedal linkage from clutch pedal to throw out fork, including the frame bracket and return spring...$65.00
clutch/brake pedal stop bracket...$ 10.00
steering column, black for 4 speed, decent driver condition...$85.00
Complete drive line with center bearing bracket for 127 inch wheel base, small block with SM465 trans. Comes with bracket for cross member...$ 75.00
1 small block 4 speed transmission cross members nice and clean...$ 65.00

Zip for business address is 34677

OK, I did some work here and got you a shipping quote for both UPS and freight.

I can do everything UPS in multiple packages for packages for $135.00. Freight came out to be $235.00.

The parts total came to $410 but we can give you everything for $400.00 even. The grand total with shipping is $535.00 UPS or add $100.00 if you wanted it freight shipped.

I can get this ready to go on Monday for you., Send me a PM and I will give you payment information if interested.

Thank you,
Thomas

Mr Handy · 05-17-2015, 12:32 AM

Quote:

Originally Posted by DLTruck1973

OK, I did some work here and got you a shipping quote for both UPS and freight.

I can do everything UPS in multiple packages for packages for $135.00. Freight came out to be $235.00.

The parts total came to $410 but we can give you everything for $400.00 even. The grand total with shipping is $535.00 UPS or add $100.00 if you wanted it freight shipped.

I can get this ready to go on Monday for you., Send me a PM and I will give you payment information if interested.

Thank you,
Thomas

Sounds good to me, PM in bound!

bean · 05-16-2015, 04:08 PM

How u check on horn contact rings?

DLTruck1973 · 05-16-2015, 11:55 PM

Quote:

Originally Posted by bean

How u check on horn contact rings?

I have plenty but I prefer to sell them all together with the plastic ring and screws. $15.00 plus shipping if interested.

Thank you,
Thomas

**Chevy Fan Always** · 05-18-2015, 09:28 AM

Just wanted to make sure the sway bar was for a half-ton?
Mike

DLTruck1973 · 05-18-2015, 11:11 AM

Quote:

Originally Posted by Chevy Fan Always

Just wanted to make sure the sway bar was for a half-ton?
Mike

Yes, it is from a 72 half ton. I will have you a quote soon.

Thank you,
Thomas

46stude · 05-19-2015, 08:59 AM

I mailed off the MO for the upper dr door trim & parking light lenses Monday morning.

DLTruck1973 · 05-19-2015, 12:06 PM

Quote:

Originally Posted by 46stude

I mailed off the MO for the upper dr door trim & parking light lenses Monday morning.

I will look for it and let you know when everything is ready to ship to you.

Thank you,
Thomas

doodah man · 05-19-2015, 01:32 PM

I'm interested in the passenger-side parking lamp housing if it's complete and in good condition. Let me know price + shipping to 19104. Thanks.

DLTruck1973 · 05-19-2015, 01:51 PM

Quote:

Originally Posted by doodah man

I'm interested in the passenger-side parking lamp housing if it's complete and in good condition. Let me know price + shipping to 19104. Thanks.

It will not be the one in the thread but I do have a nice usable passenger side park light housing for $12.50 plus $12.00 to ship so $24.50 total. No lens or lens screws but is otherwise complete. If you need the lens and crews, add another $17.00 for a nice driver quality lens with screws or $15.00 without screws.

Let me know if interested,
Thank you,
Thomas

doodah man · 05-19-2015, 01:55 PM

Thanks Thomas. Does it include the gasket? Either way, I'll take it. How will you ship? You can PM with answers and paypal info.

Craig.

DLTruck1973 · 05-19-2015, 02:29 PM

Quote:

Originally Posted by doodah man

Thanks Thomas. Does it include the gasket? Either way, I'll take it. How will you ship? You can PM with answers and paypal info.

Craig.

PM on the way.

Thank you,
Thomas

Dewey72 · 05-20-2015, 04:02 PM

Looking for a drivers side 72 pickup door. Got one?

DLTruck1973 · 05-20-2015, 04:12 PM

Quote:

Originally Posted by Dewey72

Looking for a drivers side 72 pickup door. Got one?

I may have one but have to check. What are you looking for condition wise? Are you worried about speaker hole?

I will post a photo and price if I can help you.

Thank you,
Thomas

Dewey72 · 05-20-2015, 05:22 PM

A speaker hole is ok, I can repair that.

DLTruck1973 · 05-20-2015, 06:26 PM

Quote:

Originally Posted by Dewey72

A speaker hole is ok, I can repair that.

Here is the one I have. It does have a speaker hole and in dented on the inside lower edge near the speaker hole. Overall a very solid door. It has only had one set of mirrors on it so not filled with mirror holes.

The sharpie circles are very minor dings, hard to see in the photo. The lower corners are solid as well.

I need $175.00 for this door if you pick it up.

Let me know if you want/need any additional photos.

Thank you,
Thomas

Dewey72 · 05-20-2015, 06:35 PM

Ok I will let ya know. That was off a 72 right. Cant see the screw hole were the wing window comes in.

DLTruck1973 · 05-20-2015, 07:23 PM

Quote:

Originally Posted by Dewey72

Ok I will let ya know. That was off a 72 right. Cant see the screw hole were the wing window comes in.

Yes sir, it is a 72 only drivers door. Let me know.

Thank you,
Thomas

Tilldogg · 05-28-2015, 04:33 PM

Do you have the body still? Im looking for the A Pillar post passenger side, if it can be cut of cab level to include some of the roof,
Thanks
Posted via Mobile Device

05-15-2015, 11:58 AM	#4
kcsa75 Registered User Join Date: Oct 2010 Location: Kansas City Posts: 3,590	Re: 1972 C10 Parting Thomas, thanks for posting addition photos on the trim, but I'm going to pass. Thanks again. __________________ Willie Swamp Angel Truckers '72 C10 Highlander *People who blindly follow a GPS end up on television programs on The Weather Channel. Some survive, some don't.*

05-15-2015, 06:35 PM	#5
Mr Handy Registered User Join Date: Feb 2013 Location: Spring Hill, Florida Posts: 465	Re: 1972 C10 Parting brake/clutch pedal assembly...$ 45.00 2wd 4 speed (SM465) floor hump...$ 35.00 4 speed (SM465) shift handle with boot and ring and handle, very minor tear in boot, under fold...$ 40.00 complete clutch pedal linkage from clutch pedal to throw out fork, including the frame bracket and return spring...$65.00 clutch/brake pedal stop bracket...$ 10.00 steering column, black for 4 speed, decent driver condition...$85.00 Complete drive line with center bearing bracket for 127 inch wheel base, small block with SM465 trans. Comes with bracket for cross member...$ 75.00 1 small block 4 speed transmission cross members nice and clean...$ 65.00 Zip for business address is 34677

05-16-2015, 04:08 PM	#9
bean Registered User Join Date: Jun 2002 Location: Fort Worth, TX Posts: 915	Re: 1972 C10 Parting How u check on horn contact rings?

05-18-2015, 09:28 AM	#11
Chevy Fan Always Registered User Join Date: May 2015 Location: Ashland, Ohio Posts: 579	Re: 1972 C10 Parting Just wanted to make sure the sway bar was for a half-ton? Mike

05-19-2015, 08:59 AM	#13
46stude Registered User Join Date: Dec 2014 Location: Rockport, Texas Posts: 192	Re: 1972 C10 Parting I mailed off the MO for the upper dr door trim & parking light lenses Monday morning.

05-19-2015, 01:32 PM	#15
doodah man Registered User Join Date: Apr 2011 Location: Philadelphia, PA Posts: 173	Re: 1972 C10 Parting I'm interested in the passenger-side parking lamp housing if it's complete and in good condition. Let me know price + shipping to 19104. Thanks. __________________ 1972 C-10 Deluxe 350 V8 - 350TH ------------------------------ We're not the jet set We're the old Chevrolet set

05-19-2015, 01:55 PM	#17
doodah man Registered User Join Date: Apr 2011 Location: Philadelphia, PA Posts: 173	Re: 1972 C10 Parting Thanks Thomas. Does it include the gasket? Either way, I'll take it. How will you ship? You can PM with answers and paypal info. Craig. __________________ 1972 C-10 Deluxe 350 V8 - 350TH ------------------------------ We're not the jet set We're the old Chevrolet set

05-20-2015, 04:02 PM	#19
Dewey72 Registered User Join Date: Jun 2013 Location: Hubbard OR Posts: 67	Re: 1972 C10 Parting Looking for a drivers side 72 pickup door. Got one?

05-20-2015, 05:22 PM	#21
Dewey72 Registered User Join Date: Jun 2013 Location: Hubbard OR Posts: 67	Re: 1972 C10 Parting A speaker hole is ok, I can repair that.

05-20-2015, 06:35 PM	#23
Dewey72 Registered User Join Date: Jun 2013 Location: Hubbard OR Posts: 67	Re: 1972 C10 Parting Ok I will let ya know. That was off a 72 right. Cant see the screw hole were the wing window comes in.

05-28-2015, 04:33 PM	#25
Tilldogg Registered User Join Date: May 2015 Location: Nottingham Posts: 33	Re: 1972 C10 Parting Do you have the body still? Im looking for the A Pillar post passenger side, if it can be cut of cab level to include some of the roof, Thanks Posted via Mobile Device



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.