68 S/C update..... - Page 44 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Number98 · 08-15-2013, 08:22 PM

Quote:

Originally Posted by Hart_Rod

Got the fuel rails from Holley, (nice pieces!) and a FPR from Aeromotive. I still need a few more pieces and I'll be done with the fuel system. I'm also finishing up the A/C lines and mounting the condenser.

Looks awesome Rob!

lchall · 08-15-2013, 08:43 PM

Been reading thru the whole build. Looks great! Going to be a lot of help to me as I joined the 6.2L/6l80e club the other night and bought a Camaro setup off Ebay. It's not quite as low as your 135 mile setup, its got 1200 miles.

Hope your ok with me asking lots of questions, I'd really appreciate any help I can get.

Name: $(KGrHqZHJEUFH9FCZoE7BS!(n)2Bkw~~60_12.jpg
Views: 1947
Size: 34.3 KB

Name: $(KGrHqZHJEUFH9FCZoE7BS!(n)2Bkw~~60_12.jpg
Views: 1947
Size: 34.3 KB

jmedero · 08-15-2013, 11:06 PM

Your killing it man. Sorry I wasn't home yesterday. I'll call you this weekend.
Posted via Mobile Device

**Hart_Rod** · 08-16-2013, 09:13 AM

Quote:

Originally Posted by Rusbuilt

Looks great Rob!

Quote:

Originally Posted by Number98

Looks awesome Rob!

Thanks guys!

Quote:

Originally Posted by lchall

Been reading thru the whole build. Looks great! Going to be a lot of help to me as I joined the 6.2L/6l80e club the other night and bought a Camaro setup off Ebay. It's not quite as low as your 135 mile setup, its got 1200 miles.

Hope your ok with me asking lots of questions, I'd really appreciate any help I can get.

Attachment 1141289

Fire away!!! Did you get a good deal? Let me know what you need.

Quote:

Originally Posted by jmedero

Your killing it man. Sorry I wasn't home yesterday. I'll call you this weekend.
Posted via Mobile Device

It's getting closer.....I'm headed to Orlando. I'll get up with you next week.

STOCKISH · 08-16-2013, 10:35 AM

Hey Rob, does the Holley LS accessory bracket kit use the stock idler pulleys and alternator? Also, which water pump are you using? Thanks man.

sourkraut · 08-16-2013, 10:10 PM

What are you looking at for horse power with the ls? What was your old one?

**Hart_Rod** · 08-17-2013, 10:39 PM

Quote:

Originally Posted by 1972SuperCheyenne

Hey Rob, does the Holley LS accessory bracket kit use the stock idler pulleys and alternator? Also, which water pump are you using? Thanks man.

The idler doesn't work or the pulleys. I used my factory water pump which has the same spacing as the truck pumps. The alternator will work also.

Here's the kit I used:

http://www.holley.com/20-132.asp

And the directions:

http://www.holley.com/data/Products/...R10613rev7.pdf
http://www.holley.com/data/Products/...R10615rev3.pdf

Quote:

Originally Posted by sourkraut

What are you looking at for horse power with the ls? What was your old one?

The 383 made 622 at the crank. I'm hoping for that or maybe a little more...

Posted via Mobile Device

STOCKISH · 08-17-2013, 11:26 PM

Thanks Rob, that works perfect. All the part #s for idlers and tensioners are what I was looking for. Thanks buddy.

C10_ustacould · 08-28-2013, 11:04 PM

Looking forward to wrenching on this one Friday!

STOCKISH · 08-28-2013, 11:07 PM

Id love to drive back down there just to help and hang out. Beautiful truck man.

**Tom Vogel** · 09-01-2013, 10:19 AM

Tic-toc. tic-toc....

**Hart_Rod** · 09-11-2013, 09:50 AM

Quote:

Originally Posted by 1972SuperCheyenne

Thanks Rob, that works perfect. All the part #s for idlers and tensioners are what I was looking for. Thanks buddy.

Your Welcome!

Quote:

Originally Posted by Bucks68

Looking forward to wrenching on this one Friday!

Maybe this Saturday..

Quote:

Originally Posted by 1972SuperCheyenne

Id love to drive back down there just to help and hang out. Beautiful truck man.

Thanks for the offer. I wish I had a stable enough schedule to plan stuff sooner instead of last minute.....

Quote:

Originally Posted by Tom Vogel

Tic-toc. tic-toc....

Making progress.....should wrap up the fuel system tonight, lots of work and $$$$ but it SHOULD be right....

big_al_71 · 09-11-2013, 11:30 AM

The engine bay looks terrific with that bad boy modern set up in there....

**superflysteiny** · 09-11-2013, 11:52 AM

So clean

SeTx67 · 09-11-2013, 12:08 PM

Unless I missed it, what size fuel line are you running?
Posted via Mobile Device

EZ SPEED · 09-11-2013, 12:31 PM

Looks Great Rob!! keep up the good work .

Oh by the way....sold my 2010 Camaro SS .........and bought a 2009 Corvette Z06

docstheman · 09-11-2013, 03:48 PM

amazing! one day.... I want to do that.

**Hart_Rod** · 09-11-2013, 03:52 PM

Quote:

Originally Posted by big_al_71

The engine bay looks terrific with that bad boy modern set up in there....

Thanks!

Quote:

Originally Posted by superflysteiny

So clean

Thanks!

Quote:

Originally Posted by SeTx67

Unless I missed it, what size fuel line are you running?
Posted via Mobile Device

I have an 10 AN feed line that splits in to 8 AN feed line that goes to both sides of the rails and then an 8 AN return line.

Quote:

Originally Posted by EZ SPEED

Looks Great Rob!! keep up the good work .

Oh by the way....sold my 2010 Camaro SS .........and bought a 2009 Corvette Z06

Thanks! Sweet! I'm thinking about getting an '14 Vette.....

Number98 · 09-11-2013, 04:10 PM

Makes me jealous....

Rusbuilt · 09-11-2013, 07:11 PM

Nice work Rob!

**Hart_Rod** · 09-12-2013, 09:35 AM

Quote:

Originally Posted by Number98

Makes me jealous....

Quote:

Originally Posted by Rusbuilt

Nice work Rob!

Thanks!

Auxillary oil cooler and fuel system done!

mcbassin · 09-12-2013, 11:07 AM

Very nice progress Rob! Love the attention to details.

raull · 09-12-2013, 01:33 PM

your killing it rob , looking sweet !!!!

**Hart_Rod** · 09-13-2013, 09:11 AM

Quote:

Originally Posted by mcbassin

Very nice progress Rob! Love the attention to details.

Quote:

Originally Posted by raull

your killing it rob , looking sweet !!!!

Thanks guys! I got the inner cooler mounted last night. I just need to finish up the plumbing on it and that part will be done. I plan on painting it black so you won't be able to see it behind the grill.

My Speartech wiring harness should be here today. A big thanks to John! He has been great in helping me customize it for the supercharger and adapting this part that I ordered this last week from TwistMachine:

http://twistmachine.com/index.php?ma...products_id=39

The paddles are built by a small family run company. I did a lot of research on this product and all I could find is a bunch of great reviews! Thanks Steve.

I also need to give a shoutout to Garrett at Magncharger! He has been very instrumental in answering questions and providing parts to help my get the TVS 1900 installed properly. He was gracious enough to give me his personal cell phone and has answered numerous texts at night and during the weekends, thanks again Garrett!

Progress is being made and I've been lucky to have a lot of good companys and car guys help me out on this venture. I definitely would not be as far I am, if it wer not for their help. Soooooo...I'm not sure I'm going to make my Crusing the Coast deadline, but it won't be from lack of effort....

**Palf70Step** · 09-13-2013, 09:15 AM

I hope you can make CTC Rob. But there is always next year too. Truck looks so great!

08-15-2013, 08:43 PM	#1077
lchall Registered User Join Date: Feb 2008 Location: St. Charles, MO Posts: 291	Re: 68 S/C update..... Been reading thru the whole build. Looks great! Going to be a lot of help to me as I joined the 6.2L/6l80e club the other night and bought a Camaro setup off Ebay. It's not quite as low as your 135 mile setup, its got 1200 miles. Hope your ok with me asking lots of questions, I'd really appreciate any help I can get. __________________ 1967 Chevy SWB 1972 Chevy SWB 1972 Chevy SWB K20 4x4 1991 Ford F-150 2013 Dodge Ram 1500 4x4

08-15-2013, 11:06 PM	#1078
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,072	Re: 68 S/C update..... Your killing it man. Sorry I wasn't home yesterday. I'll call you this weekend. Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

08-16-2013, 10:35 AM	#1080
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: 68 S/C update..... Hey Rob, does the Holley LS accessory bracket kit use the stock idler pulleys and alternator? Also, which water pump are you using? Thanks man. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

08-16-2013, 10:10 PM	#1081
sourkraut Registered User Join Date: Sep 2008 Location: WI Posts: 1,243	Re: 68 S/C update..... What are you looking at for horse power with the ls? What was your old one? __________________ "The way it is" truck build http://67-72chevytrucks.com/vboard/s...d.php?t=359200

08-17-2013, 11:26 PM	#1083
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: 68 S/C update..... Thanks Rob, that works perfect. All the part #s for idlers and tensioners are what I was looking for. Thanks buddy. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

08-28-2013, 11:04 PM	#1084
C10_ustacould A day late and $1 short... Join Date: Dec 2008 Location: Northwest FL Posts: 3,870	Re: 68 S/C update..... Looking forward to wrenching on this one Friday! __________________ Buck Instagram: C10_ustacould 1963 SWB Fleet Side 528 Desert Beige Milly 1967 SWB Step Side 506 Medium Blue The Old Girl 1968 SWB Fleet Side 503 Light Green Ellie SOLD 1965 SWB Fleet Side 507 Light Blue Prescription Strength SOLD 1971 SWB Fleet Side 521 White Shiro SOLD 1968 SWB Step Side 503 Light Green My Old Farm Truck SOLD

08-28-2013, 11:07 PM	#1085
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: 68 S/C update..... Id love to drive back down there just to help and hang out. Beautiful truck man. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

09-01-2013, 10:19 AM	#1086
Tom Vogel 2WD Jimmy Join Date: Mar 2005 Location: Davis County, Utah Posts: 2,563	Re: 68 S/C update..... Tic-toc. tic-toc....

09-11-2013, 11:30 AM	#1088
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: 68 S/C update..... The engine bay looks terrific with that bad boy modern set up in there.... __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

09-11-2013, 11:52 AM	#1089
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: 68 S/C update..... So clean __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

09-11-2013, 12:08 PM	#1090
SeTx67 Registered User Join Date: May 2013 Location: Lumberton, TX Posts: 795	Re: 68 S/C update..... Unless I missed it, what size fuel line are you running? Posted via Mobile Device

09-11-2013, 12:31 PM	#1091
EZ SPEED Registered User Join Date: May 2009 Location: Anniston, Alabama Posts: 164	Re: 68 S/C update..... Looks Great Rob!! keep up the good work . Oh by the way....sold my 2010 Camaro SS .........and bought a 2009 Corvette Z06 __________________ Eric 1967 C10 Small Window - LWB http://67-72chevytrucks.com/vboard/s...d.php?t=657509 2004 Silverado 2500HD - Turbo Diesel 603 rwhp / 1090 rwtq 2016 Camaro SS - Satin Pearl Nero wrap My 2010 Camaro SS Magazine feature (SOLD) http://www.superchevy.com/features/g...of-perfection/

09-11-2013, 03:48 PM	#1092
docstheman Registered User Join Date: Jun 2013 Location: Tyler, TX Posts: 102	Re: 68 S/C update..... amazing! one day.... I want to do that. __________________ ~ It's a Learning Process ~ Click Here for my Blazer Build: 1971 Blazer 4x4 Click Here for my Work Truck Build: 1970 C10 LWB Toys: 1970 C10, 1971 Blazer 4x4, 1976 Corvette Stingray L82, 2011 Cadillac CTS 6 speed, 2008 VTX 1800F

09-11-2013, 04:10 PM	#1094
Number98 Prestige Worldwide Join Date: Feb 2001 Location: Worldwide Posts: 2,553	Re: 68 S/C update..... Makes me jealous....

09-11-2013, 07:11 PM	#1095
Rusbuilt Registered User Join Date: Mar 2012 Location: Knoxville, TN Posts: 5,381	Re: 68 S/C update..... Nice work Rob! __________________ -Rus PLEASE HELP WITH PROJECT UNDERHAULINPaypal donations accepted @ rus1785@yahoo.com Rusbuilt's garage 1968 Chevy C-30 Darcy SOLD Rusbuilt shop truck *SOLD*



Register or Log In To remove these advertisements.

09-12-2013, 11:07 AM	#1097
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: 68 S/C update..... Very nice progress Rob! Love the attention to details. __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

09-12-2013, 01:33 PM	#1098
raull Registered User Join Date: Mar 2009 Location: miramar florida Posts: 1,232	Re: 68 S/C update..... your killing it rob , looking sweet !!!! __________________ check out my build thread 71 c/10 step side 5.3 twin turbo http://67-72chevytrucks.com/vboard/s...d.php?t=485320 raul

09-13-2013, 09:15 AM	#1100
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,720	Re: 68 S/C update..... I hope you can make CTC Rob. But there is always next year too. Truck looks so great! __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

Register or Log In To remove these advertisements.