SC 1984 C10 parting out* - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Alex1 · 02-04-2010, 03:46 PM

How about the sway bar brakets that are bolted to the frame - if they are not too rusted.

*Stitch* · 02-04-2010, 07:17 PM

I'd like to keep the sway bar and brackets as a package...there is just surface rust on them...scuff and paint and their good...I'll sell the package for $100 plus shipping...thanks...

and I'll get pictures up soon of the steering wheel and door panels...

Chuck.

*Stitch* · 02-04-2010, 09:23 PM

here's pictures of the door panels...like I said they are complete besides the straps and the trim behind the straps...they are in very good shape...there are a couple of areas that need attention though...the tops of the door panels are faded..there is no dry rot or anything like that...a can SEM color coat and these will look like new...I planned on color coating them and selling them for more, but I didn't get around to it...the pockets, cloth inserts, and armrests are all in very good condition...the window felts at the top of the doors are there and in tact...one has a tear on it, but they are in fair condition...as you can see in the pictures of the back of the door panels, all the prongs and nuts are intact and there are no cracks in the door panels...the lower door panels are 100% restorable...the chrome on the top of the carpet is in excellent condition as are the vents...you can take them to an upholstery shop and they can put new carpet on these and they will be brand new...I manage an upholstery shop so I have a little experience with this...
door panels stripped are $40 set
armrests $10 set
pockets $10 set
lower carpet panels $10 set
power window and door lock switches $10
I'll sell the upper and lower door panels as is in a package deal for $60...that's 25% off
if it'll sweeten the deal, I'll strip the upper door panels down, clean and colorcoat them the original color and reassemble them for free...if you buy the whole package
if you don't want the door panels whole, we can start taking stuff off of them...

Pic 1 - door panels
Pic 2 - driver's upper and lower door panel
Pic 3 - passenger's upper and lower door panel
Pic 4 - damage to driver's carpet
Pic 5 - top of driver's door panel where it's faded

*Stitch* · 02-04-2010, 09:31 PM

more door panel pictures

Pic 1 - Top of passenger door panel where it's faded
Pic 2 - back of driver's door panel
Pic 3 - back of passenger's door panel
Pic 4 - door panel pull strap $5
Pic 5 - stake pocket tie downs...these go in and the butterfly tightens up on the bottom...there are in good condition...$10 set

*Stitch* · 02-04-2010, 09:42 PM

Pic 1 - steering wheel and horn button...steering wheel is in excellent condition...horn button has a crack
Pic 2 - close up of horn button
Pic 3 - separate temp gauges...these are not from the gauge bezel...these were extras...they both work fine..the one on the left is in great condition...the one on the right could use some paint on the needle...$5 each

83_Stepside · 02-04-2010, 10:06 PM

where are you located? i am in Columbia, SC and i'm interested in the bezel thats cut of the cd player. i probably wont be able to buy until next week though.

*Stitch* · 02-05-2010, 12:22 AM

no problem...if you want my cell to get in touch with me just pm me...thanks

**ScottH** · 02-09-2010, 11:59 AM

I'd be interested in the arm rests pending shipping cost to 08753.

Thanks.
Scott

*Stitch* · 02-09-2010, 01:19 PM

Quote:

Originally Posted by ScottH

I'd be interested in the arm rests pending shipping cost to 08753.

Thanks.
Scott

The complete door panels including arm rests are sold pending funds....You're next in line.

*Stitch* · 02-11-2010, 11:38 PM

ttt....some price adjustments...

JW76 · 02-12-2010, 12:55 AM

do you still have the little sway bar stands that mount on the frame?

*Stitch* · 02-12-2010, 07:37 PM

Quote:

Originally Posted by JW76

do you still have the little sway bar stands that mount on the frame?

pm sent

*Stitch* · 02-13-2010, 11:51 AM

parts list added to and updated

*Stitch* · 02-14-2010, 12:08 PM

here's some better pictures of the hood and cowl panel...as you can see in the second picture, the cowl panel has a hole for an antenna...don't understand this because there's an antenna in the windshield...in the last picture you can see that there is no hole in the cowl of my crewcab...I will sell the crewcab cowl panel in place of the green one in the second pic if you don't want the antenna hole...thanks...

Pic 1 -

*Stitch* · 02-17-2010, 12:05 AM

many many parts still for sale...if you see something you like pm me an offer...I will make deals on multiple items...thanks guys

Chuck.

*Stitch* · 02-18-2010, 09:52 PM

ttt

*Stitch* · 02-26-2010, 09:00 AM

ttt

palposity · 02-28-2010, 10:02 AM

Maybe I missed it, but did you list a price for the cab? I am in need of a complete cab.

*Stitch* · 02-28-2010, 11:13 AM

the cab is already stripped, but the price is $400...there's some pics on page 5...the cab doesn't come with the doors...there is only one spot of surface rust in the cab and that's where the heater core leaked I think...it's on the passenger floor board...you can see it in the pics...there's NO rust or dents Anywhere else.... thanks...just let me know what you decide

Chuck

bitchin85 · 03-02-2010, 10:51 PM

do you still have the bed? is it for sale? it looked pretty clean...

*Stitch* · 03-03-2010, 12:45 AM

yes I do still have the bed...I'll take some pics in the morning of the bed and post them tomorrow after I get off work...I've been working late, so the pics probably won't be posted until after 7:30 eastern time

*Stitch* · 03-03-2010, 09:02 PM

Pic 1 & 2 - outside door handles...good driver quality...some how I only managed to take a picture of the passenger one...it was early this morning and I was half awake...lol...if you need a picture of the driver's one I'll take one...it looks like the passenger one though

Pic 3 & 4 - vent visors

*Stitch* · 03-03-2010, 09:09 PM

These are some pics of the bed...the scratch on the passenger side is just a scratch...it goes through the paint, but there is no dent or crease there...looks like someone keyed the truck...and although there's a sticker on the driver's side that says 4x4, it is not...

...there are some holes in the bed rails from a tool box or bed rails or something...the front panel is straight as a board...and the bed floor is very straight with only a few minor dings...I can get some more pics inside if you'd like...I just need to clean the bed out...I took pictures down the sides so you could see how straight it is...there is a dent up near the bed rails on the back side of the driver's side...it's not anything major...thanks for looking...

Chuck.

*Stitch* · 03-03-2010, 09:10 PM

more bed pics...

rod86 · 03-04-2010, 10:57 AM

hi would you remove the vent window assemblys from the doors? if so would you send them to australia?

cheers

02-04-2010, 03:46 PM	#1
Alex1 Registered User Join Date: Jul 2007 Location: Ottawa Ontario Canada Posts: 1,156	Re: 1984 C10 parting out* How about the sway bar brakets that are bolted to the frame - if they are not too rusted.

02-04-2010, 07:17 PM	#2
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: 1984 C10 parting out* I'd like to keep the sway bar and brackets as a package...there is just surface rust on them...scuff and paint and their good...I'll sell the package for $100 plus shipping...thanks... and I'll get pictures up soon of the steering wheel and door panels... Chuck. Last edited by Stitch; 02-13-2010 at 11:19 AM.

02-04-2010, 09:23 PM	#3
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: 1984 C10 parting out* here's pictures of the door panels...like I said they are complete besides the straps and the trim behind the straps...they are in very good shape...there are a couple of areas that need attention though...the tops of the door panels are faded..there is no dry rot or anything like that...a can SEM color coat and these will look like new...I planned on color coating them and selling them for more, but I didn't get around to it...the pockets, cloth inserts, and armrests are all in very good condition...the window felts at the top of the doors are there and in tact...one has a tear on it, but they are in fair condition...as you can see in the pictures of the back of the door panels, all the prongs and nuts are intact and there are no cracks in the door panels...the lower door panels are 100% restorable...the chrome on the top of the carpet is in excellent condition as are the vents...you can take them to an upholstery shop and they can put new carpet on these and they will be brand new...I manage an upholstery shop so I have a little experience with this... door panels stripped are $40 set armrests $10 set pockets $10 set lower carpet panels $10 set power window and door lock switches $10 I'll sell the upper and lower door panels as is in a package deal for $60...that's 25% off if it'll sweeten the deal, I'll strip the upper door panels down, clean and colorcoat them the original color and reassemble them for free...if you buy the whole package if you don't want the door panels whole, we can start taking stuff off of them... Pic 1 - door panels Pic 2 - driver's upper and lower door panel Pic 3 - passenger's upper and lower door panel Pic 4 - damage to driver's carpet Pic 5 - top of driver's door panel where it's faded Attached Images Last edited by Stitch; 02-04-2010 at 09:38 PM.

02-04-2010, 09:31 PM	#4
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: 1984 C10 parting out* more door panel pictures Pic 1 - Top of passenger door panel where it's faded Pic 2 - back of driver's door panel Pic 3 - back of passenger's door panel Pic 4 - door panel pull strap $5 Pic 5 - stake pocket tie downs...these go in and the butterfly tightens up on the bottom...there are in good condition...$10 set Attached Images

02-04-2010, 09:42 PM	#5
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: 1984 C10 parting out* Pic 1 - steering wheel and horn button...steering wheel is in excellent condition...horn button has a crack Pic 2 - close up of horn button Pic 3 - separate temp gauges...these are not from the gauge bezel...these were extras...they both work fine..the one on the left is in great condition...the one on the right could use some paint on the needle...$5 each Attached Images Last edited by Stitch; 02-04-2010 at 10:16 PM.

02-04-2010, 10:06 PM	#6
83_Stepside Registered User Join Date: Dec 2009 Location: Columbia, SC Posts: 29	Re: 1984 C10 parting out* where are you located? i am in Columbia, SC and i'm interested in the bezel thats cut of the cd player. i probably wont be able to buy until next week though.

02-05-2010, 12:22 AM	#7
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: 1984 C10 parting out* no problem...if you want my cell to get in touch with me just pm me...thanks

02-09-2010, 11:59 AM	#8
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: 1984 C10 parting out* I'd be interested in the arm rests pending shipping cost to 08753. Thanks. Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

02-11-2010, 11:38 PM	#10
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: 1984 C10 parting out* ttt....some price adjustments...

02-12-2010, 12:55 AM	#11
JW76 Registered User Join Date: Dec 2008 Location: Providence Rhode Island Posts: 404	Re: 1984 C10 parting out* do you still have the little sway bar stands that mount on the frame?

02-13-2010, 11:51 AM	#13
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: 1984 C10 parting out* parts list added to and updated

02-14-2010, 12:08 PM	#14
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: 1984 C10 parting out* here's some better pictures of the hood and cowl panel...as you can see in the second picture, the cowl panel has a hole for an antenna...don't understand this because there's an antenna in the windshield...in the last picture you can see that there is no hole in the cowl of my crewcab...I will sell the crewcab cowl panel in place of the green one in the second pic if you don't want the antenna hole...thanks... Pic 1 - Attached Images

02-17-2010, 12:05 AM	#15
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: 1984 C10 parting out* many many parts still for sale...if you see something you like pm me an offer...I will make deals on multiple items...thanks guys Chuck.

02-18-2010, 09:52 PM	#16
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: 1984 C10 parting out* ttt

02-26-2010, 09:00 AM	#17
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: 1984 C10 parting out* ttt



Register or Log In To remove these advertisements.

02-28-2010, 10:02 AM	#18
palposity Registered User Join Date: Sep 2009 Location: Syracuse NY Posts: 684	Re: 1984 C10 parting out* Maybe I missed it, but did you list a price for the cab? I am in need of a complete cab. __________________ Project #1 "Pops"--1980 Chevrolet Scottsdale C10 3rd Generation in the same original owner family. GOAL: Restore to "almost" original. View Project Pops HERE Project #2 "Cletus"--1986 Chevy K20 4.10 Gear Ratio GOAL: Restore into a heavy duty work/plow rig View Project Cletus HERE - SOLD DD--2008 Duramax CCSB

02-28-2010, 11:13 AM	#19
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: 1984 C10 parting out* the cab is already stripped, but the price is $400...there's some pics on page 5...the cab doesn't come with the doors...there is only one spot of surface rust in the cab and that's where the heater core leaked I think...it's on the passenger floor board...you can see it in the pics...there's NO rust or dents Anywhere else.... thanks...just let me know what you decide Chuck

03-02-2010, 10:51 PM	#20
bitchin85 Registered User Join Date: Aug 2009 Location: Lambertville MI Posts: 962	Re: 1984 C10 parting out* do you still have the bed? is it for sale? it looked pretty clean... __________________ "I'll keep my guns, money, and freedom. You can keep the "change"

03-03-2010, 12:45 AM	#21
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: 1984 C10 parting out* yes I do still have the bed...I'll take some pics in the morning of the bed and post them tomorrow after I get off work...I've been working late, so the pics probably won't be posted until after 7:30 eastern time

03-03-2010, 09:02 PM	#22
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: 1984 C10 parting out* Pic 1 & 2 - outside door handles...good driver quality...some how I only managed to take a picture of the passenger one...it was early this morning and I was half awake...lol...if you need a picture of the driver's one I'll take one...it looks like the passenger one though Pic 3 & 4 - vent visors Attached Images

03-03-2010, 09:09 PM	#23
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: 1984 C10 parting out* These are some pics of the bed...the scratch on the passenger side is just a scratch...it goes through the paint, but there is no dent or crease there...looks like someone keyed the truck...and although there's a sticker on the driver's side that says 4x4, it is not......there are some holes in the bed rails from a tool box or bed rails or something...the front panel is straight as a board...and the bed floor is very straight with only a few minor dings...I can get some more pics inside if you'd like...I just need to clean the bed out...I took pictures down the sides so you could see how straight it is...there is a dent up near the bed rails on the back side of the driver's side...it's not anything major...thanks for looking... Chuck. Attached Images

03-03-2010, 09:10 PM	#24
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: 1984 C10 parting out* more bed pics... Attached Images

03-04-2010, 10:57 AM	#25
rod86 great southern land Join Date: Feb 2008 Location: perth - australia Posts: 6,194	Re: 1984 C10 parting out* hi would you remove the vent window assemblys from the doors? if so would you send them to australia? cheers __________________ rod 86 chevy c10 silverado

Register or Log In To remove these advertisements.