1967 C10 Long/Fleet - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jchav62 · 04-09-2012, 10:09 AM

Well it wasn't the sending unit or the wire. I put in a new sending unit and there was no change. I ended up putting a manual gauge in it. She runs about a steady 190...

I then had some troubles keeping her running. Started starving for fuel... After chasing the problem (blew out fuel lines, added fuel filters, replaced the fuel pump)for awhile I found that the floats in the carb were getting stuck shut. They were hitting the sides of the carb. She's back in action...

jchav62 · 04-11-2012, 09:56 AM

I was out 'monkey-ing' with the truck yesterday when the "big brown truck" pulled up... Delivered me some mo' parts. Anti rattle window felts and a turn signal switch. I got everything installed right away. Success...

No more window rattles...

Signals work great....

jchav62 · 04-25-2012, 10:33 AM

Me and my buddy Dan (DAN66) ditched work yesterday to work on my '67. It was a beautiful day! We installed the rear drop springs.

I also swapped out the caps with some bowtie moons that I had in the garage... and added beauty rings.

Thanks for the help DAN!! You are the MAN!

jchav62 · 04-25-2012, 10:38 AM

Oh yeah... Danny also hooked me up with a pair of shocks for the rear... Grac!!

DAN66 · 04-25-2012, 10:44 AM

It was a good day! Looks killer!That plan was in the making months ago! Glad we finally got it done!

frmula505 · 04-25-2012, 10:46 AM

Looking better every day.

jchav62 · 04-25-2012, 10:49 AM

I'm glad all the nuts and bolts cooperated... That made the project pretty easy. And the beers afterwards were GREAT!

65panelrat · 04-25-2012, 10:57 AM

Looks Killer, Nice Job Guys! Welcome to the "Long Bed Club"!!!!

jchav62 · 04-25-2012, 01:28 PM

Craigslist Rules!!

Scored this for $40... going to pick it up after work...

sgaylord · 04-25-2012, 01:38 PM

Good score!

jchav62 · 04-30-2012, 10:17 AM

Cleaned up, sanded and primed the new grille... used a little steel wool (000) on the stainless trim... shined up pretty nice.

DAN66 · 04-30-2012, 10:21 AM

Cherry! Looks good!

65panelrat · 04-30-2012, 10:27 AM

WOW!!! THAT LOOKS PURDY!!!!!!!!!!

ChevyFreak60 · 04-30-2012, 10:41 AM

Trucks looking good brother!!

striptnut · 05-03-2012, 12:08 PM

Lookin good Joe !

jchav62 · 05-03-2012, 01:14 PM

Thanks! I hope your '67 project is going good...

longbed67 · 05-03-2012, 01:19 PM

Nice work so far! Keep it up!

jchav62 · 05-07-2012, 11:09 AM

Well I had a little issue with the truck this past week. While driving I started to smell this funky stink. At first I thought the transmission sprung a leak and it was gear oil hitting the exhaust. It wasn't the case... the voltage regulator got stuck and the battery overcharged and cooked. I was smelling the acid boiling! Got home and one side of the battery blew out a short time later. Luckily, they warrantied the battery. I replaced the regulator and when I fired it up, my voltage meter was still reading like 16-17 volts. I dug a little deeper and noticed that a couple of wires coming from the regulator got hot and melted together. After repairing those, all was good. She's back in action...

Morale of the story: If you smell sh!t, check your battery...

JC62

jchav62 · 05-15-2012, 10:37 AM

Scored these from fellow member 'heehawracing'. Got them in the mail yesterday. Did the usual 'clean/sand/prime' routine. They are ready to bolt on. Did some parts-trading with my bro-in-law Mario and got a back bumper. I still have to go pick it up from his place... that'll be next.

Here are the brackets with rock shields...

**67cheby** · 05-15-2012, 10:49 AM

looking good

doobiebro · 05-15-2012, 10:44 PM

Total transformation on the truck....Looking good Carnal...

frmula505 · 05-16-2012, 09:33 AM

Wow you are working fast on this one. I'll have to check it out.

65panelrat · 05-16-2012, 09:44 AM

Nice, I've owned my 72' 22 yrs. and have always wanted those gravel guards.

jchav62 · 05-16-2012, 11:12 AM

Quote:

Originally Posted by frmula505

Wow you are working fast on this one. I'll have to check it out.

Come on over jose! It's going at a decent rate. It's been parked for the last week... I need to replace the clutch, but I haven't built up the ganas to do the job yet... Say, I just got an email... Rumbler's is on June 2nd this year.. Same place as last year... Maybe we can plan a cruise if you are up for going this year! Let me know...

JC

frmula505 · 05-16-2012, 11:39 AM

Sure we can get together. I'm gonna try and stay a little sober this year LOL. Might take the Oldsmobile this year, but I still have a fuel problem to take care of. If not the truck again.

CRAP just checked my calender and the Espanola Valley Corvette's show and shine show is on the same day. I already committed to help set-up and run that show. Have to show off the new candy paint job on the convertible. There are some pictures on this thread.
http://truestreetcars.com/forums/pic...-finished.html

04-09-2012, 10:09 AM	#101
jchav62 1962 C-10 Join Date: Apr 2005 Location: Las Vegas, New Mexico Posts: 4,978	Re: 1967 C10 Long/Fleet Well it wasn't the sending unit or the wire. I put in a new sending unit and there was no change. I ended up putting a manual gauge in it. She runs about a steady 190... I then had some troubles keeping her running. Started starving for fuel... After chasing the problem (blew out fuel lines, added fuel filters, replaced the fuel pump)for awhile I found that the floats in the carb were getting stuck shut. They were hitting the sides of the carb. She's back in action... __________________ Joseph Chavez "See the USA in a Chevrolet!!" ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1962 C10 Shortbed Fleetside 327/th350 GV overdrive 1974 C10 Longbed Fleetside 350/th350 "The Trash Truck" 1999 Chevy 2500 OBS, Longbed 5.7/4L80E 4x4 2015 GMC Sierra SLE 1500 4x4

04-11-2012, 09:56 AM	#102
jchav62 1962 C-10 Join Date: Apr 2005 Location: Las Vegas, New Mexico Posts: 4,978	Re: 1967 C10 Long/Fleet I was out 'monkey-ing' with the truck yesterday when the "big brown truck" pulled up... Delivered me some mo' parts. Anti rattle window felts and a turn signal switch. I got everything installed right away. Success... No more window rattles... Signals work great.... __________________ Joseph Chavez "See the USA in a Chevrolet!!" ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1962 C10 Shortbed Fleetside 327/th350 GV overdrive 1974 C10 Longbed Fleetside 350/th350 "The Trash Truck" 1999 Chevy 2500 OBS, Longbed 5.7/4L80E 4x4 2015 GMC Sierra SLE 1500 4x4

04-25-2012, 10:33 AM	#103
jchav62 1962 C-10 Join Date: Apr 2005 Location: Las Vegas, New Mexico Posts: 4,978	Re: 1967 C10 Long/Fleet Me and my buddy Dan (DAN66) ditched work yesterday to work on my '67. It was a beautiful day! We installed the rear drop springs. I also swapped out the caps with some bowtie moons that I had in the garage... and added beauty rings. Thanks for the help DAN!! You are the MAN! Attached Images __________________ Joseph Chavez "See the USA in a Chevrolet!!" ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1962 C10 Shortbed Fleetside 327/th350 GV overdrive 1974 C10 Longbed Fleetside 350/th350 "The Trash Truck" 1999 Chevy 2500 OBS, Longbed 5.7/4L80E 4x4 2015 GMC Sierra SLE 1500 4x4

04-25-2012, 10:38 AM	#104
jchav62 1962 C-10 Join Date: Apr 2005 Location: Las Vegas, New Mexico Posts: 4,978	Re: 1967 C10 Long/Fleet Oh yeah... Danny also hooked me up with a pair of shocks for the rear... Grac!! __________________ Joseph Chavez "See the USA in a Chevrolet!!" ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1962 C10 Shortbed Fleetside 327/th350 GV overdrive 1974 C10 Longbed Fleetside 350/th350 "The Trash Truck" 1999 Chevy 2500 OBS, Longbed 5.7/4L80E 4x4 2015 GMC Sierra SLE 1500 4x4

04-25-2012, 10:44 AM	#105
DAN66 Registered User Join Date: Feb 2012 Location: Santa Fe, NM Posts: 92	Re: 1967 C10 Long/Fleet It was a good day! Looks killer!That plan was in the making months ago! Glad we finally got it done! __________________ '66 "Wrong bed" (Long stepper) 350, 4-speed '66 Shortbed Stepside, 350/TH350 www.instagram.com/d_ray_pinstriping

04-25-2012, 10:46 AM	#106
frmula505 Registered User Join Date: Apr 2009 Location: Santa Fe, New Mexico Posts: 456	Re: 1967 C10 Long/Fleet Looking better every day. __________________ 1961 GMC Suburban Custom 1969 Short wide project http://67-72chevytrucks.com/vboard/s...d.php?t=535479 (SOLD) 1959 Apache fleetside (frame off in progress) http://67-72chevytrucks.com/vboard/s...d.php?t=348746 1960 Apache short/narrow shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=350780 (SOLD) 1951 Plymouth leadsled project 2005 Corvette conv. Procharged 1969 Corvette stingray 2006 Cadillac XLR-V 1950 Oldsmobile 98 custom project

04-25-2012, 10:49 AM	#107
jchav62 1962 C-10 Join Date: Apr 2005 Location: Las Vegas, New Mexico Posts: 4,978	Re: 1967 C10 Long/Fleet I'm glad all the nuts and bolts cooperated... That made the project pretty easy. And the beers afterwards were GREAT! __________________ Joseph Chavez "See the USA in a Chevrolet!!" ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1962 C10 Shortbed Fleetside 327/th350 GV overdrive 1974 C10 Longbed Fleetside 350/th350 "The Trash Truck" 1999 Chevy 2500 OBS, Longbed 5.7/4L80E 4x4 2015 GMC Sierra SLE 1500 4x4

04-25-2012, 10:57 AM	#108
65panelrat Registered User Join Date: Aug 2008 Location: Rio Rancho, New Mexico Posts: 211	Re: 1967 C10 Long/Fleet Looks Killer, Nice Job Guys! Welcome to the "Long Bed Club"!!!! __________________ Bowties For Life!🇺🇸

04-25-2012, 01:28 PM	#109
jchav62 1962 C-10 Join Date: Apr 2005 Location: Las Vegas, New Mexico Posts: 4,978	Re: 1967 C10 Long/Fleet Craigslist Rules!! Scored this for $40... going to pick it up after work... Attached Images __________________ Joseph Chavez "See the USA in a Chevrolet!!" ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1962 C10 Shortbed Fleetside 327/th350 GV overdrive 1974 C10 Longbed Fleetside 350/th350 "The Trash Truck" 1999 Chevy 2500 OBS, Longbed 5.7/4L80E 4x4 2015 GMC Sierra SLE 1500 4x4

04-25-2012, 01:38 PM	#110
sgaylord Project collector Join Date: Mar 2006 Location: Sanderson, Fl Posts: 700	Re: 1967 C10 Long/Fleet Good score! __________________ 69 CST-10 SWB (disguised as a 67) 383/700r4 Jezebel Jezebel 3.0 NEW!!! 2020 GMC 3500 Denali Duramax 2016 Harley Street Glide CVO Roll Tide!

04-30-2012, 10:17 AM	#111
jchav62 1962 C-10 Join Date: Apr 2005 Location: Las Vegas, New Mexico Posts: 4,978	Re: 1967 C10 Long/Fleet Cleaned up, sanded and primed the new grille... used a little steel wool (000) on the stainless trim... shined up pretty nice. Attached Images __________________ Joseph Chavez "See the USA in a Chevrolet!!" ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1962 C10 Shortbed Fleetside 327/th350 GV overdrive 1974 C10 Longbed Fleetside 350/th350 "The Trash Truck" 1999 Chevy 2500 OBS, Longbed 5.7/4L80E 4x4 2015 GMC Sierra SLE 1500 4x4

04-30-2012, 10:21 AM	#112
DAN66 Registered User Join Date: Feb 2012 Location: Santa Fe, NM Posts: 92	Re: 1967 C10 Long/Fleet Cherry! Looks good! __________________ '66 "Wrong bed" (Long stepper) 350, 4-speed '66 Shortbed Stepside, 350/TH350 www.instagram.com/d_ray_pinstriping

04-30-2012, 10:27 AM	#113
65panelrat Registered User Join Date: Aug 2008 Location: Rio Rancho, New Mexico Posts: 211	Re: 1967 C10 Long/Fleet WOW!!! THAT LOOKS PURDY!!!!!!!!!! __________________ Bowties For Life!🇺🇸

04-30-2012, 10:41 AM	#114
ChevyFreak60 Registered User Join Date: Oct 2011 Location: Nambe, New Mexico Posts: 407	Re: 1967 C10 Long/Fleet Trucks looking good brother!! __________________ 1960 Chevy Stepside 2wd 1966 Chevy Fleetside 2wd 1965 Chevy Suburban 2wd 1965 Chevy Fleetside 4X4 1960 Chevy Fleetside BBW 2wd

05-03-2012, 12:08 PM	#115
striptnut Registered User Join Date: Oct 2011 Location: Rio Rancho,New Mexico Posts: 19	Re: 1967 C10 Long/Fleet Lookin good Joe !



Register or Log In To remove these advertisements.

05-03-2012, 01:14 PM	#116
jchav62 1962 C-10 Join Date: Apr 2005 Location: Las Vegas, New Mexico Posts: 4,978	Re: 1967 C10 Long/Fleet Thanks! I hope your '67 project is going good... __________________ Joseph Chavez "See the USA in a Chevrolet!!" ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1962 C10 Shortbed Fleetside 327/th350 GV overdrive 1974 C10 Longbed Fleetside 350/th350 "The Trash Truck" 1999 Chevy 2500 OBS, Longbed 5.7/4L80E 4x4 2015 GMC Sierra SLE 1500 4x4

05-03-2012, 01:19 PM	#117
longbed67 Registered User Join Date: Jun 2011 Location: Monroe, WI Posts: 1,415	Re: 1967 C10 Long/Fleet Nice work so far! Keep it up! __________________ *Adam* My 1967 C10 - Turbo 250 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=485843 (608) 214-8706

05-07-2012, 11:09 AM	#118
jchav62 1962 C-10 Join Date: Apr 2005 Location: Las Vegas, New Mexico Posts: 4,978	Re: 1967 C10 Long/Fleet Well I had a little issue with the truck this past week. While driving I started to smell this funky stink. At first I thought the transmission sprung a leak and it was gear oil hitting the exhaust. It wasn't the case... the voltage regulator got stuck and the battery overcharged and cooked. I was smelling the acid boiling! Got home and one side of the battery blew out a short time later. Luckily, they warrantied the battery. I replaced the regulator and when I fired it up, my voltage meter was still reading like 16-17 volts. I dug a little deeper and noticed that a couple of wires coming from the regulator got hot and melted together. After repairing those, all was good. She's back in action... Morale of the story: If you smell sh!t, check your battery... JC62 __________________ Joseph Chavez "See the USA in a Chevrolet!!" ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1962 C10 Shortbed Fleetside 327/th350 GV overdrive 1974 C10 Longbed Fleetside 350/th350 "The Trash Truck" 1999 Chevy 2500 OBS, Longbed 5.7/4L80E 4x4 2015 GMC Sierra SLE 1500 4x4

05-15-2012, 10:37 AM	#119
jchav62 1962 C-10 Join Date: Apr 2005 Location: Las Vegas, New Mexico Posts: 4,978	Re: 1967 C10 Long/Fleet Scored these from fellow member 'heehawracing'. Got them in the mail yesterday. Did the usual 'clean/sand/prime' routine. They are ready to bolt on. Did some parts-trading with my bro-in-law Mario and got a back bumper. I still have to go pick it up from his place... that'll be next. Here are the brackets with rock shields... Attached Images __________________ Joseph Chavez "See the USA in a Chevrolet!!" ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1962 C10 Shortbed Fleetside 327/th350 GV overdrive 1974 C10 Longbed Fleetside 350/th350 "The Trash Truck" 1999 Chevy 2500 OBS, Longbed 5.7/4L80E 4x4 2015 GMC Sierra SLE 1500 4x4

05-15-2012, 10:49 AM	#120
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 1967 C10 Long/Fleet looking good __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

05-15-2012, 10:44 PM	#121
doobiebro Registered User Join Date: Nov 2011 Location: Chaparral NM Posts: 688	Re: 1967 C10 Long/Fleet Total transformation on the truck....Looking good Carnal... __________________ CURRENT & PAST CHEVY TRUCKS 60 C-10 Apache short step side 62 C-10 short step side 66 GMC Long bed fleet side 305 V-6 77 C-20 Custom Deluxe (Blue Goose)

05-16-2012, 09:33 AM	#122
frmula505 Registered User Join Date: Apr 2009 Location: Santa Fe, New Mexico Posts: 456	Re: 1967 C10 Long/Fleet Wow you are working fast on this one. I'll have to check it out. __________________ 1961 GMC Suburban Custom 1969 Short wide project http://67-72chevytrucks.com/vboard/s...d.php?t=535479 (SOLD) 1959 Apache fleetside (frame off in progress) http://67-72chevytrucks.com/vboard/s...d.php?t=348746 1960 Apache short/narrow shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=350780 (SOLD) 1951 Plymouth leadsled project 2005 Corvette conv. Procharged 1969 Corvette stingray 2006 Cadillac XLR-V 1950 Oldsmobile 98 custom project

05-16-2012, 09:44 AM	#123
65panelrat Registered User Join Date: Aug 2008 Location: Rio Rancho, New Mexico Posts: 211	Re: 1967 C10 Long/Fleet Nice, I've owned my 72' 22 yrs. and have always wanted those gravel guards. __________________ Bowties For Life!🇺🇸

05-16-2012, 11:39 AM	#125
frmula505 Registered User Join Date: Apr 2009 Location: Santa Fe, New Mexico Posts: 456	Re: 1967 C10 Long/Fleet Sure we can get together. I'm gonna try and stay a little sober this year LOL. Might take the Oldsmobile this year, but I still have a fuel problem to take care of. If not the truck again. CRAP just checked my calender and the Espanola Valley Corvette's show and shine show is on the same day. I already committed to help set-up and run that show. Have to show off the new candy paint job on the convertible. There are some pictures on this thread. http://truestreetcars.com/forums/pic...-finished.html __________________ 1961 GMC Suburban Custom 1969 Short wide project http://67-72chevytrucks.com/vboard/s...d.php?t=535479 (SOLD) 1959 Apache fleetside (frame off in progress) http://67-72chevytrucks.com/vboard/s...d.php?t=348746 1960 Apache short/narrow shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=350780 (SOLD) 1951 Plymouth leadsled project 2005 Corvette conv. Procharged 1969 Corvette stingray 2006 Cadillac XLR-V 1950 Oldsmobile 98 custom project Last edited by frmula505; 05-16-2012 at 11:45 AM.

Register or Log In To remove these advertisements.