OK ALL MUST GO - Bodies, Sheetmetal, Hard Top & More - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mbelle1982 · 10-07-2012, 10:39 PM

Do you have any hatch hardware for a blazer hatch?
Posted via Mobile Device

MoreLoveThanMoney · 10-07-2012, 11:01 PM

Quote:

Originally Posted by mbelle1982

Do you have any hatch hardware for a blazer hatch?
Posted via Mobile Device

I do but its in the double wall top I have for sell and I would not want to seperate it from the top. Sorry. Wish I could help

Rob68c10 · 10-08-2012, 08:48 PM

Any cabs for sale? If so are you interested in shipping?

MoreLoveThanMoney · 10-08-2012, 10:14 PM

Quote:

Originally Posted by Rob68c10

Any cabs for sale? If so are you interested in shipping?

Responded in other thread

TRUCKRUNNER67 · 10-15-2012, 08:56 PM

i want the one with the workable tub but might be interested in both for the right price

MoreLoveThanMoney · 10-15-2012, 09:45 PM

Quote:

Originally Posted by TRUCKRUNNER67

i want the one with the workable tub but might be interested in both for the right price

You can see more photos here
http://s1057.photobucket.com/albums/...beaird1/Jimmy/
Password is 72jimmy
The 2wd is a converted 4wd using 5 lug disc setup in the front. I have looked at many blazer tubs and this one was by far the nicest I could find as far as project tubs go. I bought the 4wd thinking I was going to fix it until I started really digging into it. Thats when I searched and found the Jimmy tub to do a tub swap with. The Jimmy is an A/C setup and comes with pretty much everything needed to make the metal repairs on the passenger side. The drivers side is very solid only needing a couple of minor floor patches. If it was all one color it would sure look better in the pictures. The 4wd is a 350/350/203 setup. It was running and driving before I pulled the front clip. It is a 10 bolt front and 12 bolt rear. Has 33" tires on 15" wheels. Tires arent great but arent bad. Havent seen much mileage but are just old. Not sure of the gear ratios. I have titles to both. I will make a deal for one or both. Just let me know. I also have many other parts to go with these if you are interested in any of that stuff. Will package up as much as you need.

roOstersan · 10-19-2012, 05:23 PM

Is the Chevy grille still available? And are there pictures? Looking for a good inner/outer grille. Thanx!
Posted via Mobile Device

MoreLoveThanMoney · 10-19-2012, 07:18 PM

Quote:

Originally Posted by roOstersan

Is the Chevy grille still available? And are there pictures? Looking for a good inner/outer grille. Thanx!
Posted via Mobile Device

I've still got a 71-72 style off a 72. I know that shipping to you would be $97. I can send pics if you like
Posted via Mobile Device

roOstersan · 10-19-2012, 08:19 PM

Quote:

Originally Posted by MoreLoveThanMoney

I've still got a 71-72 style off a 72. I know that shipping to you would be $97. I can send pics if you like
Posted via Mobile Device

If you could send pix that'd be great! Is it straight? Any damage? What are you looking to get for it?
Posted via Mobile Device

roOstersan · 11-04-2012, 08:34 PM

Quote:

Originally Posted by roOstersan

If you could send pix that'd be great! Is it straight? Any damage? What are you looking to get for it?
Posted via Mobile Device

Any progress on the grille pix and more info??
Posted via Mobile Device

MoreLoveThanMoney · 11-05-2012, 09:11 PM

Quote:

Originally Posted by roOstersan

Any progress on the grille pix and more info??
Posted via Mobile Device

Tried to get pics posted today but didn't get a chance. Get me an email and I will get them to you. Thanks
Posted via Mobile Device

4shongo · 10-30-2012, 12:04 PM

Do you have the rear seat arm rest assembly for sale to include the ashtrays? Let me know. Thanks

MoreLoveThanMoney · 11-04-2012, 09:50 AM

Quote:

Originally Posted by 4shongo

Do you have the rear seat arm rest assembly for sale to include the ashtrays? Let me know. Thanks

I believe I do. I know I have the brackets but need to check on the foam.
Posted via Mobile Device

4shongo · 11-04-2012, 10:27 AM

Quote:

Originally Posted by MoreLoveThanMoney

I believe I do. I know I have the brackets but need to check on the foam.
Posted via Mobile Device

Thanks anyways. Someone else already hooked me up. Good luck with your sales!
Posted via Mobile Device

MoreLoveThanMoney · 11-09-2012, 10:29 PM

Pics of 72 Grill. Has two small dings that you can see in the pics on the passenger side. Other than that the metal is in nice shape.

Bigb401 · 11-17-2012, 02:09 AM

Do you still have a clean driver and passenger door?
Also looking for the rear legs on the back bench seat for a blazer? Any luck that you have these?
Posted via Mobile Device

MoreLoveThanMoney · 11-18-2012, 10:48 AM

Quote:

Originally Posted by Bigb401

Do you still have a clean driver and passenger door?
Also looking for the rear legs on the back bench seat for a blazer? Any luck that you have these?
Posted via Mobile Device

I do still have some doors
Posted via Mobile Device

Bigb401 · 11-18-2012, 03:02 PM

Quote:

Originally Posted by MoreLoveThanMoney

I do still have some doors
Posted via Mobile Device

Can I see some pics of the doors and how much u sellin for? How much would shipping be to Wisconsin 53105?
Posted via Mobile Device

rayray767 · 11-17-2012, 10:51 PM

Yep that roll bar would be nice to have ...let me know as well...

MoreLoveThanMoney · 11-18-2012, 10:49 AM

Quote:

Originally Posted by rayray767

Yep that roll bar would be nice to have ...let me know as well...

I sold the roll bar. Thanks for asking though
Posted via Mobile Device

gringoloco · 11-24-2012, 12:01 AM

Still have the Blazer top? Photos if you do?
Posted via Mobile Device

themb2g · 12-09-2012, 10:51 PM

do you have the tailgate weather stripping retainers by chance? or the small wedge piece that screws above the striker plates?

MoreLoveThanMoney · 12-23-2012, 11:14 AM

Quote:

Originally Posted by themb2g

do you have the tailgate weather stripping retainers by chance? or the small wedge piece that screws above the striker plates?

Sorry for the delayed response but no I do not have those pieces. Wish I could have helped but thanks for asking.
Posted via Mobile Device

SACRAMENTO 71 · 12-15-2012, 01:50 PM

HELLO MOREMONEYTHANLOVE!! Do you have visors for the double wall top, the ones that have the corner brackets built into them? Thank you Nick

MoreLoveThanMoney · 12-23-2012, 11:15 AM

Quote:

Originally Posted by SACRAMENTO 71

HELLO MOREMONEYTHANLOVE!! Do you have visors for the double wall top, the ones that have the corner brackets built into them? Thank you Nick

Is there something different about the visors you are looking for or are all blazer visors the same? If the same, I believe I do have a pair
Posted via Mobile Device

10-07-2012, 10:39 PM	#1
mbelle1982 Registered User Join Date: Apr 2011 Location: Rochester, NH Posts: 43	Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More Do you have any hatch hardware for a blazer hatch? Posted via Mobile Device

10-08-2012, 08:48 PM	#3
Rob68c10 Registered User Join Date: Mar 2010 Location: Eastern Shore, Maryland Posts: 159	Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More Any cabs for sale? If so are you interested in shipping?

10-15-2012, 08:56 PM	#5
TRUCKRUNNER67 Registered User Join Date: Feb 2012 Location: jackson mo Posts: 32	Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More i want the one with the workable tub but might be interested in both for the right price

10-19-2012, 05:23 PM	#7
roOstersan Registered User Join Date: Aug 2012 Location: Vacaville, Ca Posts: 98	Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More Is the Chevy grille still available? And are there pictures? Looking for a good inner/outer grille. Thanx! Posted via Mobile Device

10-30-2012, 12:04 PM	#12
4shongo Registered User Join Date: Sep 2012 Location: Arlington, TN Posts: 315	Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More Do you have the rear seat arm rest assembly for sale to include the ashtrays? Let me know. Thanks

11-09-2012, 10:29 PM	#15
MoreLoveThanMoney Registered User Join Date: Nov 2010 Location: Oklahoma City, Ok Posts: 438	Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More Pics of 72 Grill. Has two small dings that you can see in the pics on the passenger side. Other than that the metal is in nice shape. Attached Images

11-17-2012, 02:09 AM	#16
Bigb401 Registered User Join Date: Jan 2012 Location: Burlington, wi. Posts: 254	Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More Do you still have a clean driver and passenger door? Also looking for the rear legs on the back bench seat for a blazer? Any luck that you have these? Posted via Mobile Device __________________ Proud to be IBEW Local 2150

11-17-2012, 10:51 PM	#19
rayray767 Registered User Join Date: Apr 2012 Location: Columbus Ohio Posts: 1,135	Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More Yep that roll bar would be nice to have ...let me know as well...

11-24-2012, 12:01 AM	#21
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,920	Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More Still have the Blazer top? Photos if you do? Posted via Mobile Device __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

12-09-2012, 10:51 PM	#22
themb2g Registered User Join Date: Jul 2010 Location: Portland, Oregon Posts: 411	Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More do you have the tailgate weather stripping retainers by chance? or the small wedge piece that screws above the striker plates? __________________ Check out my build: 1972 LQ4 Swap http://67-72chevytrucks.com/vboard/s...=1#post5427693

12-15-2012, 01:50 PM	#24
SACRAMENTO 71 Registered User Join Date: Aug 2012 Location: Sacramento, CA Posts: 242	Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More HELLO MOREMONEYTHANLOVE!! Do you have visors for the double wall top, the ones that have the corner brackets built into them? Thank you Nick __________________ 68 C10 SWB W/ 72 FRONT CLIP 343SB TH400 64 C10 SWB 406SB TH400 74 SUBURBAN 454BB TH400 78 K10 SWB 350 TH350 6" ON 35" BFG MUD 71 K5 350 W/ TBI 700R4 6" ON 38" BFG MUD 00 K3500 DRW BIG BLOCK "DRINKING PRBLM"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.