IA parting out a 68 C20 - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*gmachinz* · 02-23-2015, 04:11 PM

Quote:

Originally Posted by jmader

Would you sell the vacuum evaporator canister and bracket separate from the A/C box?

Sure. Is there anything else you need from it tho? Its all 100% complete from the outside....

mrf1002u · 02-23-2015, 05:31 PM

Quote:

Originally Posted by gmachinz

Let me check today on it for you!

No problem. Let me know if its the right style and if you are willing to pull it and ship it to Florida 32097. If it is the right one, let me know how much you'd want. I know it is heavy but not sure what it weighs. It would have to be a 4.10 gear. That is all I could use, but it should be. Have to pull the cover and look for the markings if the price is OK.

Note: I am in no hurry for this!!!!! I saw that you mentioned taking the bed off. I can wait until after that, so it's easier for you to get to. Maybe just snap a picture of the rear cover and the driveshaft end of it and let's see if it is the right one first.

Thanks,

Larry

**jmader** · 02-23-2015, 07:36 PM

Quote:

Originally Posted by gmachinz

Sure. Is there anything else you need from it tho? Its all 100% complete from the outside....

How much would you want for the whole setup? I don't really need another one but it might be easier that way.

JayJayB · 02-23-2015, 08:25 PM

Quote:

Originally Posted by Jake1971

I talked my son into registering on this wonderful forum.

I sent Payment by PayPal for my son's mirrors.

Don't forget the Deluxe Knobs. Thanks again!

Dad received his radio... Are the mirrors on the way?

twistedchevy · 02-23-2015, 10:12 PM

Got my parts sat, thanks

*gmachinz* · 02-24-2015, 07:49 PM

Quote:

Originally Posted by chevyguy71

Has the chrome rubbed off on the center a/c vent? How's the chrome on vent balls and door handles? Thanks Ed

Here's a couple pics of the outside door handles-the drivers side appears to be aftermarket, the passenger side is OEM GM. Both are in good shape-oddly, the aftermarket one has a fewbpit spots on the underside-I'd consider these very good driver quality. I'll PM ya on ifbyou are still interested in a package deal for these, the center vent and whichever harness you're interested in.

*gmachinz* · 02-24-2015, 08:22 PM

Quote:

Originally Posted by jmader

Would you sell the vacuum evaporator canister and bracket separate from the A/C box?

I took it off plus the hoses too just so you know how they route. I pulled the manifold vacuum fitting also so if you need that let me know-its a 2-port fitting. How's $25 shipped for the vacuum canister and fitting? Here's a pic of the canister and related hoses:

*gmachinz* · 02-24-2015, 08:22 PM

Quote:

Originally Posted by JayJayB

Dad received his radio... Are the mirrors on the way?

Yep...mirrors are enroute!

*gmachinz* · 02-24-2015, 08:27 PM

Quote:

Originally Posted by jmader

How much would you want for the whole setup? I don't really need another one but it might be easier that way.

Shipping could be pricey....I'd say $150 plus the ride? I'd include the outer housing, evaporator, heater core & hardware and the inner AC/heater box too. I'd add whatever else is included with it like the heater control valve, blend door vacuum actuator, etc. I'll also give you a really nice climate control unit from it also-its in really nice shape-great chrome trim! Lemme know!

**jmader** · 02-24-2015, 10:41 PM

Quote:

Originally Posted by gmachinz

I took it off plus the hoses too just so you know how they route. I pulled the manifold vacuum fitting also so if you need that let me know-its a 2-port fitting. How's $25 shipped for the vacuum canister and fitting? Here's a pic of the canister and related hoses:

I described it wrong- I'm actually interested in the vacuum canister that looks like a black soup cap on the outer heater box housing. How much would you want for that if it's in good shape?

*gmachinz* · 02-25-2015, 01:47 AM

The part pictured is the vacuum cannister-kind of a sideways pic I guess....lol If you only need the canister, $15 shipped my friend. PM me if interested and I'll send my PayPal info!

**jmader** · 02-25-2015, 11:54 AM

Quote:

Originally Posted by gmachinz

The part pictured is the vacuum cannister-kind of a sideways pic I guess....lol If you only need the canister, $15 shipped my friend. PM me if interested and I'll send my PayPal info!

Haha my bad. The picture looked funny for some reason. I'll take the canister and vacuum fitting. PM sent.

*gmachinz* · 02-25-2015, 09:23 PM

Cool, you got it! I'll get it boxed up and sent out tomorrow! I'll PM tracking info!

kenyanr1 · 02-26-2015, 02:30 PM

Can you post pics of the rear license plate bracket? Or text it if easier 8155496614

Jake1971 · 02-26-2015, 08:26 PM

Hey G, my son's mirrors arrived, Thanks again!

chevyguy71 · 03-03-2015, 11:10 PM

Payment sent for a/c vent, wire harness and outside door handle. Thanks ed

chevyguy71 · 03-03-2015, 11:33 PM

Payment sent.

*gmachinz* · 03-04-2015, 01:44 AM

Received and shipping out tomorrow for ya-thank you!

tcoop68 · 03-04-2015, 02:48 AM

Did you sell the vacuum canister and bracket that's mounted on the firewall above Ac evaporater box if not I have a friend in dire need of all mounting hardware he has new canister , also the bracket to install vacuume canister on passenger kick panel for door operation if you still have them
just shoot me a price shipped to 74023 and I'll take it.

*gmachinz* · 03-04-2015, 03:02 AM

I'll send ya a PM!

tcoop68 · 03-05-2015, 12:16 AM

I sent pay pal payment thanks again.

tcoop68 · 03-05-2015, 08:23 PM

Did you get my payment?

*gmachinz* · 04-24-2015, 11:51 PM

Gauge cluster, climate control unit and headlight switch w/knob all sold on EBay. Not much left of the truck-thanks to all those who helped me "spread the parts around" lol.

Motorfist · 04-25-2015, 11:47 PM

I'm looking for some bed mounting brackets. Do you still have the frame from this truck?
Thanks

*gmachinz* · 04-26-2015, 09:52 AM

Sorry no....a friend of mine took the whole bed...that was the main reason for parting the truck.

02-23-2015, 10:12 PM	#105
twistedchevy Registered User Join Date: Jan 2015 Location: napa, ca Posts: 249	Re: parting out a 68 C20 Got my parts sat, thanks __________________ Mine: 72 c20 Chevy suburban, 02 5.3 w/4l60e , factory ac and 50gal tank. 70 k10 Chevy burb, 04 5.3 w/4l60e np241, with dual 30gal saddle tanks and rear 30 gal tank Dads: 67 c10 step side(project) 72 c10 GMC burb 350/400, with 67 Chevy front clip(grocery getter) Ours: 67 c30 tow truck 70 c10 long bed 383stroker w/digital gauges(work truck)

02-25-2015, 01:47 AM	#111
gmachinz Account Suspended Join Date: Jun 2011 Location: Des Moines, IA. Posts: 4,143	Re: parting out a 68 C20 The part pictured is the vacuum cannister-kind of a sideways pic I guess....lol If you only need the canister, $15 shipped my friend. PM me if interested and I'll send my PayPal info!

02-25-2015, 09:23 PM	#113
gmachinz Account Suspended Join Date: Jun 2011 Location: Des Moines, IA. Posts: 4,143	Re: parting out a 68 C20 Cool, you got it! I'll get it boxed up and sent out tomorrow! I'll PM tracking info!

02-26-2015, 02:30 PM	#114
kenyanr1 Registered User Join Date: Apr 2013 Location: bradley, il Posts: 18	Re: parting out a 68 C20 Can you post pics of the rear license plate bracket? Or text it if easier 8155496614

02-26-2015, 08:26 PM	#115
Jake1971 Registered User Join Date: Oct 2013 Location: Bonnerdale, AR Posts: 697	Re: parting out a 68 C20 Hey G, my son's mirrors arrived, Thanks again! __________________ 1971 Bone Stock C10 project "Jake" 1997 Sierra SLT factory short bed "Silver Bullet"

03-03-2015, 11:10 PM	#116
chevyguy71 Registered User Join Date: Dec 2014 Location: Santa Ana, Ca Posts: 69	Re: parting out a 68 C20 Payment sent for a/c vent, wire harness and outside door handle. Thanks ed

03-03-2015, 11:33 PM	#117
chevyguy71 Registered User Join Date: Dec 2014 Location: Santa Ana, Ca Posts: 69	Re: parting out a 68 C20 Payment sent.

03-04-2015, 01:44 AM	#118
gmachinz Account Suspended Join Date: Jun 2011 Location: Des Moines, IA. Posts: 4,143	Re: parting out a 68 C20 Received and shipping out tomorrow for ya-thank you!

03-04-2015, 02:48 AM	#119
tcoop68 tcoop68 Join Date: Jan 2006 Location: Cushing Oklahoma Posts: 226	Re: parting out a 68 C20 Did you sell the vacuum canister and bracket that's mounted on the firewall above Ac evaporater box if not I have a friend in dire need of all mounting hardware he has new canister , also the bracket to install vacuume canister on passenger kick panel for door operation if you still have them just shoot me a price shipped to 74023 and I'll take it.

03-04-2015, 03:02 AM	#120
gmachinz Account Suspended Join Date: Jun 2011 Location: Des Moines, IA. Posts: 4,143	Re: parting out a 68 C20 I'll send ya a PM!

03-05-2015, 12:16 AM	#121
tcoop68 tcoop68 Join Date: Jan 2006 Location: Cushing Oklahoma Posts: 226	Re: parting out a 68 C20 I sent pay pal payment thanks again.

03-05-2015, 08:23 PM	#122
tcoop68 tcoop68 Join Date: Jan 2006 Location: Cushing Oklahoma Posts: 226	Re: parting out a 68 C20 Did you get my payment?

04-24-2015, 11:51 PM	#123
gmachinz Account Suspended Join Date: Jun 2011 Location: Des Moines, IA. Posts: 4,143	Re: parting out a 68 C20 Gauge cluster, climate control unit and headlight switch w/knob all sold on EBay. Not much left of the truck-thanks to all those who helped me "spread the parts around" lol.

04-25-2015, 11:47 PM	#124
Motorfist Registered User Join Date: Apr 2015 Location: Ririe, Idaho Posts: 136	Re: parting out a 68 C20 I'm looking for some bed mounting brackets. Do you still have the frame from this truck? Thanks __________________ 67 c30 Cab and Chassis (ex motorhome truck) 68 c10 LWB 70 c30 Cab and Chassis 133" converted to Longhorn 72 K10 LWB Rust Bucket Hunting Truck

04-26-2015, 09:52 AM	#125
gmachinz Account Suspended Join Date: Jun 2011 Location: Des Moines, IA. Posts: 4,143	Re: parting out a 68 C20 Sorry no....a friend of mine took the whole bed...that was the main reason for parting the truck.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.