Billet Radio Plate for cut dash...opinions? - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

drewam · 06-14-2008, 01:02 PM

Count me in also for a set...I'm local so maybe we can work something out? I'll PM you. Awesome work...

On a side note, I'm new to the board and love it here. So much information and nice people. I just bought my 67 stepper 2 months ago and I'm eager to start on it!

mahanian · 06-14-2008, 04:41 PM

I am going to order a batch of each part next week. For all the people that prepay before I place the order, the cost will be as previously posted...$53 unpolished and $67 polished. This includes the radio plate and the heater control bezel (each, not for both). After I place the order the cost will go back up $10 for each piece.

lyrikz · 06-14-2008, 04:44 PM

Quote:

Originally Posted by mahanian

I am going to order a batch of each part next week. For all the people that prepay before I place the order, the cost will be as previously posted...$53 unpolished and $67 polished. This includes the radio plate and the heater control bezel (each, not for both). After I place the order the cost will go back up $10 for each piece.

So its 53 for BOTH the bezel and the radio plate?? Or 53 each?

mahanian · 06-15-2008, 03:27 AM

I've had a lot of questions about pricing so I thought I should clear things up by creating a price list...

Radio Plate:
Before June 19th
$67 - Polished
$53 - Unpolished
Starting June 19th
$77 - Polished
$63 - Unpolished

Heater/AC Control Bezel
Before June 19th
$67 - Polished
$53 - Unpolished
Starting June 19th
$77 - Polished
$63 - Unpolished

Shipping
$5 first item, $2 each additional item

Paypal fees (if applicable)
$2 per item

original_balzer · 06-15-2008, 03:35 AM

How is the one for putting an original radio back in coming along?

Once you get those I will definatly want one and the heater-a/c trim as well.

mahanian · 06-15-2008, 03:40 AM

Quote:

Originally Posted by original_balzer

How is the one for putting an original radio back in coming along?

Once you get those I will definatly want one and the heater-a/c trim as well.

Hoping to have one cut next week, I'll send you pictures when I get it. Are you wanting it polished or natural looking? That piece is going to be more complicated to sand, prep and polish, but it's doable...

original_balzer · 06-15-2008, 04:52 AM

I can polish it to save you some work. That would be great.

mahanian · 07-02-2008, 10:36 AM

Yep, I'm still taking orders. It will take me a few more days to get caught up with the orders I already have so if you order today it should ship on Monday. The prices are:

$77 - Polished
$63 - Unpolished

Shipping - $5 first item, $2 each additional item

Paypal fees (if applicable) - $2 per item

theoneandonly · 07-02-2008, 12:33 PM

you have been paypaled

VA72C10 · 06-15-2008, 06:10 PM

Looking forward to the installed pics...hopefully before the 19th

mahanian · 06-15-2008, 08:54 PM

Quote:

Originally Posted by VA72C10

Looking forward to the installed pics...hopefully before the 19th

Should have some tomorrow night

*FormerMember* · 06-15-2008, 09:48 PM

Any notion of when the first orders will be going out?

mahanian · 06-15-2008, 09:56 PM

Quote:

Originally Posted by grendel

Any notion of when the first orders will be going out?

I was hoping to get a minimum of 25 committed orders but that isn't going to happen so I'm going to front the rest and hope I can sell them. I'm going to order the batch of them on Wednesday. Hopefully I will get them in within a week or so

AustinScott · 06-15-2008, 10:10 PM

Should have a few more $$ in your account, cant wait to get them.
THanks

mahanian · 06-17-2008, 01:50 AM

Here is the heater control bezel in my 67...

original_balzer · 06-17-2008, 02:33 AM

looks great! Not wanting to rush ya but im exited to see the stock radio one.

ChevLoRay · 06-17-2008, 12:07 PM

Looks great!! Thanks for the pix, Jared.

70c10 · 06-25-2008, 11:05 AM

Quote:

Originally Posted by mahanian

Here is the heater control bezel in my 67...

Very nice!
2 questions- Can you make a plate that would go from edge to edge in this entire area with the key hole and cig hole cut out? Can you add the ball milled lines?. I'm thinking just a thin flat plate that I could sandwich the key/cig bezels to.

mahanian · 06-25-2008, 11:39 AM

Quote:

Originally Posted by 70c10

Very nice!
2 questions- Can you make a plate that would go from edge to edge in this entire area with the key hole and cig hole cut out? Can you add the ball milled lines?. I'm thinking just a thin flat plate that I could sandwich the key/cig bezels to.

I'm working on a bezel for this area, but it will need to be more than a flat plate because the cigarette lighter location is recessed back into the dash. I also have to figure out how to attach the ignition bezel.

70c10 · 06-25-2008, 01:44 PM

ok, maybe you could mock it up so it fits right to the diameter of the bezels so they would not need removing. if it's thin, double sided tape would hold it.

**Yukon Jack** · 06-17-2008, 05:02 PM

Great looking product. Any chance that piece would be useable in any other classic gm vehicles? That might help you have more potential customers. I'm not familiar enough with other classics, but something for you to consider.

mahanian · 06-17-2008, 05:48 PM

Quote:

Originally Posted by Dingfodgy

I may be a complete f-tard, but have you considered machining a 1-piece joint that includes both ignition switch and lighter bezels (or delete if wanted)? I think that would be butt-hole tight and potentially solve the clearance issues on the 68-72 models.

I thought about that, but since the ignition bezel and lighter bezel screw on, I have to put some thought into it.

Quote:

Originally Posted by Yukon Jack

Great looking product. Any chance that piece would be useable in any other classic gm vehicles? That might help you have more potential customers. I'm not familiar enough with other classics, but something for you to consider.

I agree, I'm not getting much interest from the 67-72 crowd so I'm going to see what else it might fit

VA72C10 · 06-17-2008, 06:09 PM

Quote:

Originally Posted by mahanian

I thought about that, but since the ignition bezel and lighter bezel screw on, I have to put some thought into it.

I agree, I'm not getting much interest from the 67-72 crowd so I'm going to see what else it might fit

Interested in the one piece w/ the bezels to screw into also...and also think that you will find the market will open up once some of these are installed and show up in rides on the boards...

Dingfodgy · 06-17-2008, 06:33 PM

Quote:

Originally Posted by mahanian

I thought about that, but since the ignition bezel and lighter bezel screw on, I have to put some thought into it.

Quote:

Originally Posted by mahanian

I agree, I'm not getting much interest from the 67-72 crowd so I'm going to see what else it might fit

A billet ignition bezel would be crazy! But given the amount of machining needed.....crazy expensive sounds more like it.

Oh- I'm sure there's plenty of interest in your kick-a$$ stuff, myself included. I suspect that there are alot of folks on here like me who've had a big chunk of their disposable income chewed up by the rising costs of everything. I swear I'll get a paypal out to you in the next couple weeks for at least a radio bezel and hopefully a heater bezel too (if the allowance will cover it).

Thanks for your great products and patience.

VA72C10 · 06-17-2008, 06:08 PM

i'm still very interested in a triple gauge pod to go in the radio position (i'll be putting the radio in the glovebox)

06-14-2008, 01:02 PM	#1
drewam Registered User Join Date: May 2008 Location: Glendale, AZ Posts: 2	Re: Billet Radio Plate for cut dash...opinions? Count me in also for a set...I'm local so maybe we can work something out? I'll PM you. Awesome work... On a side note, I'm new to the board and love it here. So much information and nice people. I just bought my 67 stepper 2 months ago and I'm eager to start on it!

06-14-2008, 04:41 PM	#2
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: Billet Radio Plate for cut dash...opinions? I am going to order a batch of each part next week. For all the people that prepay before I place the order, the cost will be as previously posted...$53 unpolished and $67 polished. This includes the radio plate and the heater control bezel (each, not for both). After I place the order the cost will go back up $10 for each piece. __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS Last edited by mahanian; 06-14-2008 at 04:42 PM.

06-15-2008, 03:27 AM	#4
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: Billet Radio Plate for cut dash...opinions? I've had a lot of questions about pricing so I thought I should clear things up by creating a price list... Radio Plate: Before June 19th $67 - Polished $53 - Unpolished Starting June 19th $77 - Polished $63 - Unpolished Heater/AC Control Bezel Before June 19th $67 - Polished $53 - Unpolished Starting June 19th $77 - Polished $63 - Unpolished Shipping $5 first item, $2 each additional item Paypal fees (if applicable) $2 per item __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS

06-15-2008, 03:35 AM	#5
original_balzer Registered User Join Date: May 2008 Location: roosevelt utah Posts: 325	Re: Billet Radio Plate for cut dash...opinions? How is the one for putting an original radio back in coming along? Once you get those I will definatly want one and the heater-a/c trim as well.

06-15-2008, 04:52 AM	#7
original_balzer Registered User Join Date: May 2008 Location: roosevelt utah Posts: 325	Re: Billet Radio Plate for cut dash...opinions? I can polish it to save you some work. That would be great.

07-02-2008, 10:36 AM	#8
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: Billet Radio Plate for cut dash...opinions? Yep, I'm still taking orders. It will take me a few more days to get caught up with the orders I already have so if you order today it should ship on Monday. The prices are: $77 - Polished $63 - Unpolished Shipping - $5 first item, $2 each additional item Paypal fees (if applicable) - $2 per item

07-02-2008, 12:33 PM	#9
theoneandonly Registered User Join Date: Nov 2007 Location: Fayetteville NC Posts: 102	Re: Billet Radio Plate for cut dash...opinions? you have been paypaled __________________ SSG Jeffery Ahlheim 586th Network Support Company, 525th BfSB US Army, FT Bragg, NC 2009 Chevy Silverado LT ext cab 5.3L If you don't stand behind our troops, please feel free to stand in front of them.

06-15-2008, 06:10 PM	#10
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Billet Radio Plate for cut dash...opinions? Looking forward to the installed pics...hopefully before the 19th

06-15-2008, 09:48 PM	#12
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Re: Billet Radio Plate for cut dash...opinions? Any notion of when the first orders will be going out?

06-15-2008, 10:10 PM	#14
AustinScott Registered User Join Date: Dec 2007 Location: Southington CT Posts: 548	Re: Billet Radio Plate for cut dash...opinions? Should have a few more $$ in your account, cant wait to get them. THanks

06-17-2008, 01:50 AM	#15
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: Billet Radio Plate for cut dash...opinions? Here is the heater control bezel in my 67... Attached Images __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS

06-17-2008, 02:33 AM	#16
original_balzer Registered User Join Date: May 2008 Location: roosevelt utah Posts: 325	Re: Billet Radio Plate for cut dash...opinions? looks great! Not wanting to rush ya but im exited to see the stock radio one.

06-17-2008, 12:07 PM	#17
ChevLoRay Old Skool Club Join Date: Jun 2001 Location: Benton, AR "The Heart of Arkansas" Posts: 10,880	Re: Billet Radio Plate for cut dash...opinions? Looks great!! Thanks for the pix, Jared. __________________ Member Nr. 2770 '96 GMC Sportside; 4.3/SLT - Daily driven....constantly needs washed. '69 C-10 SWB; 350/TH400 - in limbo The older I get, the better I was.

06-25-2008, 01:44 PM	#20
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,857	Re: Billet Radio Plate for cut dash...opinions? ok, maybe you could mock it up so it fits right to the diameter of the bezels so they would not need removing. if it's thin, double sided tape would hold it. __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads Last edited by 70c10; 06-25-2008 at 01:45 PM.

06-17-2008, 05:02 PM	#21
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,683	Re: Billet Radio Plate for cut dash...opinions? Great looking product. Any chance that piece would be useable in any other classic gm vehicles? That might help you have more potential customers. I'm not familiar enough with other classics, but something for you to consider. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14



Register or Log In To remove these advertisements.

06-17-2008, 06:08 PM	#25
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Billet Radio Plate for cut dash...opinions? i'm still very interested in a triple gauge pod to go in the radio position (i'll be putting the radio in the glovebox)

Register or Log In To remove these advertisements.