Impala SS Rear Disc Brake Brackets - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

full foot notch · 09-11-2014, 10:34 PM

I just ordered the impala calipers that the guy above mentioned $68.05 including discount and shipping. Captnfab can you pm me the prices on a set of brackets. Also what brake lines are recommended for this. Just stock rear lines ?

**Captainfab** · 09-11-2014, 11:54 PM

The price is the same as in post #1. I will send you a PM.

The Impala SS hoses will work as well as '79 Chevette hoses.

Quote:

Originally Posted by full foot notch

I just ordered the impala calipers that the guy above mentioned $68.05 including discount and shipping. Captnfab can you pm me the prices on a set of brackets. Also what brake lines are recommended for this. Just stock rear lines ?

crakarjax · 09-12-2014, 08:50 AM

Just curious -- how do you guys get around state inspection with no parking brake? These brackets seem like a great solution but I don't think I'd pass if my parking brakes didn't work.

**Captainfab** · 09-13-2014, 12:53 AM

Not all states have vehicle inspections, such as here in Idaho. If you need an e-brake/parking brake, you can use my Camaro caliper brackets or the D52 brackets with the Eldorado calipers.

Quote:

Originally Posted by crakarjax

Just curious -- how do you guys get around state inspection with no parking brake? These brackets seem like a great solution but I don't think I'd pass if my parking brakes didn't work.

full foot notch · 09-13-2014, 05:12 AM

Too bad you couldn't do a bracket that uses the impala SS calipers and maybe has a small wilwood mechanical caliper mounted below it. I went with the SS calipers as if they can stop a heavy car they can stop a heavy truck , but my old timer mechanic ( he's 75 and been doing it since 1955) was calling me a dumbass for not running an ebrake setup on my truck for safety reasons. Florida is a no inspection state.

**Captainfab** · 09-14-2014, 01:38 AM

That has already been considered, just not enough time to get it done.

Quote:

Originally Posted by full foot notch

Too bad you couldn't do a bracket that uses the impala SS calipers and maybe has a small wilwood mechanical caliper mounted below it. I went with the SS calipers as if they can stop a heavy car they can stop a heavy truck , but my old timer mechanic ( he's 75 and been doing it since 1955) was calling me a dumbass for not running an ebrake setup on my truck for safety reasons. Florida is a no inspection state.

full foot notch · 09-14-2014, 12:13 PM

What's needed to do it. Maybe I can help

**Captainfab** · 09-15-2014, 12:34 AM

More hours in the day, since I already work 70-80 hrs a week every week every month.

Quote:

Originally Posted by full foot notch

What's needed to do it. Maybe I can help

crakarjax · 09-15-2014, 09:09 AM

Quote:

Originally Posted by full foot notch

What's needed to do it. Maybe I can help

CAD skills and a CNC cutter?

Cap'n, sounds like you need an intern!

**Captainfab** · 09-15-2014, 11:58 PM

I already have a couple CAD programs, but can't afford a CNC laser. I have 2 local suppliers with 3 CNC lasers, so that isn't a problem. It's the mockup and test fitting that takes time.

tsazp · 11-30-2014, 08:56 PM

Do you have any impala as brackets? If so, I need a set.

tsazp · 11-30-2014, 08:58 PM

SS brackets. Stupid autocorrect. I will need an invoice also. Thank you. Please send it to pridefam@grm.net.

AmmoRob · 08-20-2017, 10:54 AM

Has anyone found a backing plate to use or are you running without a backing plate??

**Captainfab** · 08-20-2017, 11:19 PM

I assume you are talking about a dust/gravel shield? If so, I do not know of any stock application that will work.

Quote:

Originally Posted by AmmoRob

Has anyone found a backing plate to use or are you running without a backing plate??

gbrown0029 · 12-10-2014, 08:40 PM

PM sent.

**Captainfab** · 12-11-2014, 12:32 AM

PM replied to and PayPal invoice sent.

Quote:

Originally Posted by gbrown0029

PM sent.

gbrown0029 · 12-11-2014, 09:42 AM

Paypal sent. Thanks!

windmill · 12-24-2014, 09:32 PM

you still have the rear ss brackets for sale? thanks craig

**Captainfab** · 12-25-2014, 12:40 AM

Yes I do still sell the Impala SS rear disc brackets. However I am currently out of them. I sold my last set a few days ago and just haven't ordered more laser cutting. I can get more on order on Monday when one of my laser cutters is back to work.

Quote:

Originally Posted by windmill

you still have the rear ss brackets for sale? thanks craig

Mjminino · 02-17-2015, 08:02 PM

I would like to order a set. please send a paypal invoice to mjminino@gmail.com

**Captainfab** · 02-18-2015, 12:14 AM

Invoice sent

Quote:

Originally Posted by Mjminino

I would like to order a set. please send a paypal invoice to mjminino@gmail.com

Mjminino · 03-14-2015, 07:41 AM

Wanted to bump for a great product. Got them home and installed on my factory 64 housing!

Also found two loaded calipers off eBay from Cardone for 51 dollars a piece, included the bracket and everything.

hanly2 · 07-04-2015, 03:19 PM

$51 a piece? Thats amazing, can you tell me the seller I cant find them for less then $80 something

Wilson! · 09-09-2015, 10:18 AM

payment sent.

**Captainfab** · 09-09-2015, 10:46 PM

Payment received and brackets shipped. Thanks for the purchase

Quote:

Originally Posted by Wilson!

payment sent.

09-12-2014, 08:50 AM	#3
crakarjax Registered User Join Date: Dec 2009 Location: Kirkland, WA Posts: 1,302	Re: Impala SS Rear Disc Brake Brackets Just curious -- how do you guys get around state inspection with no parking brake? These brackets seem like a great solution but I don't think I'd pass if my parking brakes didn't work. __________________ 1968 LWB C20 / AC / Wood Bed

09-13-2014, 05:12 AM	#5
full foot notch Registered User Join Date: Apr 2003 Location: Central florida Posts: 3,223	Re: Impala SS Rear Disc Brake Brackets Too bad you couldn't do a bracket that uses the impala SS calipers and maybe has a small wilwood mechanical caliper mounted below it. I went with the SS calipers as if they can stop a heavy car they can stop a heavy truck , but my old timer mechanic ( he's 75 and been doing it since 1955) was calling me a dumbass for not running an ebrake setup on my truck for safety reasons. Florida is a no inspection state.

09-14-2014, 12:13 PM	#7
full foot notch Registered User Join Date: Apr 2003 Location: Central florida Posts: 3,223	Re: Impala SS Rear Disc Brake Brackets What's needed to do it. Maybe I can help

09-15-2014, 11:58 PM	#10
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,246	Re: Impala SS Rear Disc Brake Brackets I already have a couple CAD programs, but can't afford a CNC laser. I have 2 local suppliers with 3 CNC lasers, so that isn't a problem. It's the mockup and test fitting that takes time. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

11-30-2014, 08:56 PM	#11
tsazp Registered User Join Date: Mar 2014 Location: Ravenwood, Missouri Posts: 2	Re: Impala SS Rear Disc Brake Brackets Do you have any impala as brackets? If so, I need a set.

09-11-2014, 10:34 PM	#1
full foot notch Registered User Join Date: Apr 2003 Location: Central florida Posts: 3,223	Re: Impala SS Rear Disc Brake Brackets I just ordered the impala calipers that the guy above mentioned $68.05 including discount and shipping. Captnfab can you pm me the prices on a set of brackets. Also what brake lines are recommended for this. Just stock rear lines ?

11-30-2014, 08:58 PM	#12
tsazp Registered User Join Date: Mar 2014 Location: Ravenwood, Missouri Posts: 2	Re: Impala SS Rear Disc Brake Brackets SS brackets. Stupid autocorrect. I will need an invoice also. Thank you. Please send it to pridefam@grm.net.

08-20-2017, 10:54 AM	#13
AmmoRob Registered User Join Date: Aug 2017 Location: Round Lake Illinois Posts: 10	Re: Impala SS Rear Disc Brake Brackets Has anyone found a backing plate to use or are you running without a backing plate??

12-10-2014, 08:40 PM	#15
gbrown0029 Registered User Join Date: Nov 2013 Location: Louisville, KY Posts: 18	Re: Impala SS Rear Disc Brake Brackets PM sent.

12-11-2014, 09:42 AM	#17
gbrown0029 Registered User Join Date: Nov 2013 Location: Louisville, KY Posts: 18	Re: Impala SS Rear Disc Brake Brackets Paypal sent. Thanks!

12-24-2014, 09:32 PM	#18
windmill Registered User Join Date: Jan 2007 Location: Sylvania, Alabama Posts: 288	Re: Impala SS Rear Disc Brake Brackets you still have the rear ss brackets for sale? thanks craig __________________ 72 swb pickup http://i124.photobucket.com/albums/p...k/100_0958.jpg 1967 chevelle ss 1966 mustang getting a l33 ls motor 1969 chevy dump truck 1989 mustang 6.0 ls best time of 1.29 at 5.91 https://www.youtube.com/watch?v=JtbooZoGZmQ

02-17-2015, 08:02 PM	#20
Mjminino Registered User Join Date: Nov 2014 Location: Omaha Posts: 558	Re: Impala SS Rear Disc Brake Brackets I would like to order a set. please send a paypal invoice to mjminino@gmail.com

03-14-2015, 07:41 AM	#22
Mjminino Registered User Join Date: Nov 2014 Location: Omaha Posts: 558	Re: Impala SS Rear Disc Brake Brackets Wanted to bump for a great product. Got them home and installed on my factory 64 housing! Also found two loaded calipers off eBay from Cardone for 51 dollars a piece, included the bracket and everything. Attached Images

07-04-2015, 03:19 PM	#23
hanly2 Registered User Join Date: Mar 2014 Location: Gibbstown, NJ Posts: 176	Re: Impala SS Rear Disc Brake Brackets $51 a piece? Thats amazing, can you tell me the seller I cant find them for less then $80 something

09-09-2015, 10:18 AM	#24
Wilson! Registered User Join Date: Oct 2014 Location: Huntsville Posts: 55	Re: Impala SS Rear Disc Brake Brackets payment sent.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.