67CST rebuild down under - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

aussie67c10 · 08-05-2012, 06:50 AM

I found my seat belts in a box today

aussie67c10 · 08-12-2012, 05:48 AM

I had my console stored at my mates place for 5 years along with 12 yards of new vial for the seats and doors ,so its off to the trimmers tomorrow to trim the seats . now all i have to do is find the rest of the console to put it back together.

aussie67c10 · 08-13-2012, 11:26 AM

I dropped the trim off today, should be ready in about 4-6 weeks . the seats should look good when they are done . i bought them off ebay a few years back . they came out of a 69 cst . i unpacked another box today it had the billetspecialties v trac set up for the front of the motor and the ron davies radiator

aussie67c10 · 08-13-2012, 11:39 AM

here a couple more photos

aussie67c10 · 08-14-2012, 07:05 AM

I am going to run rack and pinion steering , so no more ****ty steering box . The guy who makes these cool units only lives around the corner to me . these units are fully adjustable and work with LHD or RHD trucks . How cool is that.

aussie67c10 · 08-15-2012, 06:24 AM

I took out the old manual transmission crossmember, and dropped the chassis down to put the new mounts on . i picked up the front guards from my mates house . i dropped in to the trimmers to check the position for the power window switch and he has already started on my trim

aussie67c10 · 08-15-2012, 06:30 AM

here is a few more photos

aussie67c10 · 08-16-2012, 05:11 AM

I did a bit more today but it was cold and rainy

Krooked Kustoms · 08-16-2012, 07:16 PM

Looking good mate!! I'm so jealous!! Gonna be one bad ass truck for sure! Keep it up cheers
Posted via Mobile Device

aussie67c10 · 08-16-2012, 07:49 PM

Quote:

Originally Posted by Krooked Kustoms

Looking good mate!! I'm so jealous!! Gonna be one bad ass truck for sure! Keep it up cheers
Posted via Mobile Device

thanks mate . hey i tried to phone you a couple of times , but no answer

aussie67c10 · 08-16-2012, 07:56 PM

Here is the latest update from the trimmers

Krooked Kustoms · 08-16-2012, 08:07 PM

Yeah sorry bout that. Get bad reception up here unless I'm in the right spot ay.
Posted via Mobile Device

Slick67 · 08-16-2012, 11:07 PM

Yeah, those seats look killer!!! Lot's of great progress and an awesome stash of parts!

aussie67c10 · 08-17-2012, 12:36 AM

Here is a couple more pix of the trim . not bad seeing i dropped them off on monday

aussie67c10 · 08-17-2012, 12:39 AM

Quote:

Originally Posted by Slick67

Yeah, those seats look killer!!! Lot's of great progress and an awesome stash of parts!

Thanks dave. its getting there

aussie67c10 · 08-17-2012, 05:16 AM

I pressed in the new bottom ball joint and assembled the two bottom wishbones . here is a couple of pix of the tool i used.

aussie67c10 · 08-17-2012, 05:26 AM

here is a few more

aussie67c10 · 08-17-2012, 05:42 AM

Hey this is a pic of me at work making money to pay for all the parts

Slick67 · 08-17-2012, 03:03 PM

Quote:

Originally Posted by aussie67c10

Hey this is a pic of me at work making money to pay for all the parts

That is the biggest still I have ever seen!!!!! How many gallons of moonshine does that hold??

aussie67c10 · 08-17-2012, 03:14 PM

Quote:

Originally Posted by Slick67

That is the biggest still I have ever seen!!!!! How many gallons of moonshine does that hold??

Just enough to pay the freight bill to get my parts to Australia

CNC-C10 · 08-17-2012, 05:22 PM

That big pile of parts is looking good!

Love the white interior and black paint.
Gary

**FRENCHBLUE72** · 08-17-2012, 07:08 PM

Good looking ride...

Thumpt · 08-17-2012, 08:44 PM

Greta work, loving your build.

aussie67c10 · 08-17-2012, 10:23 PM

Quote:

Originally Posted by CNC-C10

That big pile of parts is looking good!

Love the white interior and black paint.
Gary

Thanks Gary

aussie67c10 · 08-17-2012, 10:26 PM

Quote:

Originally Posted by FRENCHBLUE72

Good looking ride...

Thanks bud .I checked out your ride,its going to be killer when its finished

08-05-2012, 06:50 AM	#126
aussie67c10 Registered User Join Date: Dec 2011 Location: Adelaide South australia Posts: 249	Re: 67CST rebuild down under I found my seat belts in a box today Attached Images __________________ BOWTIE OR NO-TIE

08-12-2012, 05:48 AM	#127
aussie67c10 Registered User Join Date: Dec 2011 Location: Adelaide South australia Posts: 249	Re: 67CST rebuild down under I had my console stored at my mates place for 5 years along with 12 yards of new vial for the seats and doors ,so its off to the trimmers tomorrow to trim the seats . now all i have to do is find the rest of the console to put it back together. Attached Images __________________ BOWTIE OR NO-TIE

08-13-2012, 11:26 AM	#128
aussie67c10 Registered User Join Date: Dec 2011 Location: Adelaide South australia Posts: 249	Re: 67CST rebuild down under I dropped the trim off today, should be ready in about 4-6 weeks . the seats should look good when they are done . i bought them off ebay a few years back . they came out of a 69 cst . i unpacked another box today it had the billetspecialties v trac set up for the front of the motor and the ron davies radiator Attached Images __________________ BOWTIE OR NO-TIE

08-13-2012, 11:39 AM	#129
aussie67c10 Registered User Join Date: Dec 2011 Location: Adelaide South australia Posts: 249	Re: 67CST rebuild down under here a couple more photos Attached Images __________________ BOWTIE OR NO-TIE

08-14-2012, 07:05 AM	#130
aussie67c10 Registered User Join Date: Dec 2011 Location: Adelaide South australia Posts: 249	Re: 67CST rebuild down under I am going to run rack and pinion steering , so no more ****ty steering box . The guy who makes these cool units only lives around the corner to me . these units are fully adjustable and work with LHD or RHD trucks . How cool is that. Attached Images __________________ BOWTIE OR NO-TIE

08-15-2012, 06:24 AM	#131
aussie67c10 Registered User Join Date: Dec 2011 Location: Adelaide South australia Posts: 249	Re: 67CST rebuild down under I took out the old manual transmission crossmember, and dropped the chassis down to put the new mounts on . i picked up the front guards from my mates house . i dropped in to the trimmers to check the position for the power window switch and he has already started on my trim Attached Images __________________ BOWTIE OR NO-TIE

08-15-2012, 06:30 AM	#132
aussie67c10 Registered User Join Date: Dec 2011 Location: Adelaide South australia Posts: 249	Re: 67CST rebuild down under here is a few more photos Attached Images __________________ BOWTIE OR NO-TIE

08-16-2012, 05:11 AM	#133
aussie67c10 Registered User Join Date: Dec 2011 Location: Adelaide South australia Posts: 249	Re: 67CST rebuild down under I did a bit more today but it was cold and rainy Attached Images __________________ BOWTIE OR NO-TIE

08-16-2012, 07:16 PM	#134
Krooked Kustoms Registered User Join Date: Feb 2011 Location: Langwarrin South, Victoria, Australia Posts: 121	Re: 67CST rebuild down under Looking good mate!! I'm so jealous!! Gonna be one bad ass truck for sure! Keep it up cheers Posted via Mobile Device __________________ Check out my Rigs! 69 C10 getting bagged baby!! http://67-72chevytrucks.com/vboard/s...d.php?t=465547 78 K10 http://67-72chevytrucks.com/vboard/s...d.php?t=527664

08-16-2012, 07:56 PM	#136
aussie67c10 Registered User Join Date: Dec 2011 Location: Adelaide South australia Posts: 249	Re: 67CST rebuild down under Here is the latest update from the trimmers Attached Images __________________ BOWTIE OR NO-TIE

08-16-2012, 08:07 PM	#137
Krooked Kustoms Registered User Join Date: Feb 2011 Location: Langwarrin South, Victoria, Australia Posts: 121	Re: 67CST rebuild down under Yeah sorry bout that. Get bad reception up here unless I'm in the right spot ay. Posted via Mobile Device __________________ Check out my Rigs! 69 C10 getting bagged baby!! http://67-72chevytrucks.com/vboard/s...d.php?t=465547 78 K10 http://67-72chevytrucks.com/vboard/s...d.php?t=527664

08-16-2012, 11:07 PM	#138
Slick67 Sofa King Crazy!! Join Date: Oct 2008 Location: Houston, TX Posts: 3,090	Re: 67CST rebuild down under Yeah, those seats look killer!!! Lot's of great progress and an awesome stash of parts! __________________ You found the Tater. *My Blazer Build (New)* - http://67-72chevytrucks.com/vboard/s...d.php?t=654650 *My 67 Build* - http://67-72chevytrucks.com/vboard/s...d.php?t=335650 67 Chevy LWB big window a/c AKA TOTALLED BY A JACKASS. 1972 2wd Blazer "Porterbuilt and Sloshed"

08-17-2012, 12:36 AM	#139
aussie67c10 Registered User Join Date: Dec 2011 Location: Adelaide South australia Posts: 249	Re: 67CST rebuild down under Here is a couple more pix of the trim . not bad seeing i dropped them off on monday Attached Images __________________ BOWTIE OR NO-TIE

08-17-2012, 05:16 AM	#141
aussie67c10 Registered User Join Date: Dec 2011 Location: Adelaide South australia Posts: 249	Re: 67CST rebuild down under I pressed in the new bottom ball joint and assembled the two bottom wishbones . here is a couple of pix of the tool i used. Attached Images __________________ BOWTIE OR NO-TIE

08-17-2012, 05:26 AM	#142
aussie67c10 Registered User Join Date: Dec 2011 Location: Adelaide South australia Posts: 249	Re: 67CST rebuild down under here is a few more Attached Images __________________ BOWTIE OR NO-TIE



Register or Log In To remove these advertisements.

08-17-2012, 05:42 AM	#143
aussie67c10 Registered User Join Date: Dec 2011 Location: Adelaide South australia Posts: 249	Re: 67CST rebuild down under Hey this is a pic of me at work making money to pay for all the parts Attached Images __________________ BOWTIE OR NO-TIE

08-17-2012, 05:22 PM	#146
CNC-C10 Registered User Join Date: Aug 2012 Location: colo Posts: 13	Re: 67CST rebuild down under That big pile of parts is looking good! Love the white interior and black paint. Gary

08-17-2012, 07:08 PM	#147
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,590	Re: 67CST rebuild down under Good looking ride... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

08-17-2012, 08:44 PM	#148
Thumpt Registered User Join Date: Mar 2012 Location: Melbourne Victoria Posts: 35	Re: 67CST rebuild down under Greta work, loving your build.

Register or Log In To remove these advertisements.