KY parting out 68 c10 - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Gary 70 Jimmy** · 11-18-2012, 08:43 AM

Did you sell the rocker panels how much do you want for them and witch vender did you buy them from.

bigjoe77 · 11-18-2012, 02:41 PM

Sorry Gary, I already sold the rockers.
Posted via Mobile Device

bigjoe77 · 11-22-2012, 01:00 AM

Quote:

Originally Posted by mo

Hi joe got the parts thanks. Also, do you have the wire harness from the firewall to the battery and engine for this 68? What condition is it in? How much shipped to 93013 and I need the whole enchilada including any relays and junction blocks... Thanks
Mo
Posted via Mobile Device

I believe I have the harness you need Mo. Looks to be in pretty good condition. I'll get some pics to you. I'll try to determine a price too.

dbstepside · 11-25-2012, 05:06 PM

do you still have number 23 i think the passenger side inner fender and if so would you ship it? area code 42071. thanks.

bigjoe77 · 11-25-2012, 11:02 PM

Yes I still have it. Let me check on shipping and get back to you. Thanks

bigjoe77 · 11-29-2012, 12:41 AM

Quote:

Originally Posted by dbstepside

do you still have number 23 i think the passenger side inner fender and if so would you ship it? area code 42071. thanks.

Well, according to the postal service, it is too large to be mailed. I could check UPS if you would like, but it will probably be expensive. Let me know. Thanks

bulldawg2 · 11-30-2012, 11:22 AM

Have you got pics of the bench seat?

**70STOVEBOLT** · 11-30-2012, 11:50 AM

Quote:

Originally Posted by bigjoe77

Well, according to the postal service, it is too large to be mailed. I could check UPS if you would like, but it will probably be expensive. Let me know. Thanks

Joe, if dbstepside passes on this I would be interested, pending a shipping cost of course.

Thanks,
Mark

dbstepside · 11-30-2012, 08:20 PM

thanks for checking bigjoe but i'll pass it on to stovebolt.

bigjoe77 · 12-01-2012, 12:55 AM

Quote:

Originally Posted by CMH77

Thanks bigjoe77. Pending total cost, I want them.

Hey Matt, here are a couple of pics of the rough area. Let me know what you think.

Name: IMG_1354.jpg
Views: 167
Size: 46.1 KB

Name: IMG_1353.jpg
Views: 168
Size: 46.3 KB

Name: IMG_1351.jpg
Views: 164
Size: 45.2 KB

bigjoe77 · 12-01-2012, 12:59 AM

Quote:

Originally Posted by bulldawg2

Have you got pics of the bench seat?

Here are a couple of pics

Name: IMG_1324.jpg
Views: 167
Size: 46.2 KB

Name: IMG_1325.jpg
Views: 161
Size: 51.4 KB

CMH77 · 12-01-2012, 03:49 AM

I still want them Joe. They're in better shape than mine anyway. Thank you.

bigjoe77 · 12-01-2012, 01:05 PM

Alright Matt, I'll get those sent out on Monday then. Thanks man
Posted via Mobile Device

silver7 · 01-04-2013, 08:45 PM

How much for me to pick-up both bedsides?

bigjoe77 · 01-05-2013, 02:23 PM

Sorry man, I sold the bed a couple of weeks ago
Posted via Mobile Device

munky · 01-09-2013, 06:51 PM

Quote:

Originally Posted by bigjoe77

Sorry man, I sold the bed a couple of weeks ago
Posted via Mobile Device

Do you have a grill for a 68?
Posted via Mobile Device

BigRed76 · 01-10-2013, 07:46 PM

I need the underdash a/c airbox, I believe its called the diverter box. do you have one?

bigjoe77 · 01-10-2013, 11:20 PM

Quote:

Originally Posted by munky

Do you have a grill for a 68?
Posted via Mobile Device

Sorry man, I actually just sold it 2 days ago

bigjoe77 · 01-10-2013, 11:21 PM

Quote:

Originally Posted by BigRed76

I need the underdash a/c airbox, I believe its called the diverter box. do you have one?

I don't think so, but I'll check to make sure

Nathans71 · 01-22-2013, 06:42 PM

Did you sell the calipers? Also interested in inner fender. Live in Louisville so could quick trip it over so you want have to look at shipping. Thanks.

nobolt · 01-22-2013, 06:59 PM

i bought the 68 grille...Joe does a great job packing and shipping...a pleasure to deal with!

thanks again Joe!

bigjoe77 · 02-01-2013, 09:49 PM

Quote:

Originally Posted by Nathans71

Did you sell the calipers? Also interested in inner fender. Live in Louisville so could quick trip it over so you want have to look at shipping. Thanks.

Sorry about the late reply Nathan. I still have the inner fender and calipers if you are still interested. Just let me know. I'll be sure to check back sooner!

Thanks,

Joe

bigjoe77 · 02-01-2013, 09:50 PM

Quote:

Originally Posted by nobolt

i bought the 68 grille...Joe does a great job packing and shipping...a pleasure to deal with!

thanks again Joe!

Thanks Dave I appreciate that!

the_69_C10 · 02-01-2013, 10:00 PM

Shipping on lower ball joints (both) to 31794

bigjoe77 · 02-03-2013, 12:25 AM

I'm pretty sure I can squeeze those into a $5.80 flat rate box.

11-18-2012, 08:43 AM	#126
Gary 70 Jimmy Senior Member Join Date: Jan 2002 Location: Burghill, Ohio 44404 Posts: 3,401	Re: parting out 68 c10 Did you sell the rocker panels how much do you want for them and witch vender did you buy them from. __________________ 1972 GMC Jimmy 1/2 4X4 4wheel camper 1970 GMC Jimmy 1/2 4X4 350 1969 Chevy Blazer 1/2 4X4 307 1967 chevy LWB 3/4 396

11-18-2012, 02:41 PM	#127
bigjoe77 Registered User Join Date: Oct 2010 Location: Georgetown Kentucky Posts: 203	Re: parting out 68 c10 Sorry Gary, I already sold the rockers. Posted via Mobile Device

11-25-2012, 05:06 PM	#129
dbstepside Registered User Join Date: Dec 2010 Location: murray ky Posts: 351	Re: parting out 68 c10 do you still have number 23 i think the passenger side inner fender and if so would you ship it? area code 42071. thanks.

11-25-2012, 11:02 PM	#130
bigjoe77 Registered User Join Date: Oct 2010 Location: Georgetown Kentucky Posts: 203	Re: parting out 68 c10 Yes I still have it. Let me check on shipping and get back to you. Thanks

11-30-2012, 11:22 AM	#132
bulldawg2 Registered User Join Date: Nov 2012 Location: Powder Springs GA Posts: 15	Re: parting out 68 c10 Have you got pics of the bench seat?

11-30-2012, 08:20 PM	#134
dbstepside Registered User Join Date: Dec 2010 Location: murray ky Posts: 351	Re: parting out 68 c10 thanks for checking bigjoe but i'll pass it on to stovebolt.

12-01-2012, 03:49 AM	#137
CMH77 Registered User Join Date: Sep 2012 Location: Springfield, IL Posts: 71	Re: parting out 68 c10 I still want them Joe. They're in better shape than mine anyway. Thank you.

12-01-2012, 01:05 PM	#138
bigjoe77 Registered User Join Date: Oct 2010 Location: Georgetown Kentucky Posts: 203	Re: parting out 68 c10 Alright Matt, I'll get those sent out on Monday then. Thanks man Posted via Mobile Device

01-04-2013, 08:45 PM	#139
silver7 Registered User Join Date: Jul 2009 Location: High Point, NC Posts: 613	Re: parting out 68 c10 How much for me to pick-up both bedsides? __________________ Shawn 1971 C10 4x4

01-05-2013, 02:23 PM	#140
bigjoe77 Registered User Join Date: Oct 2010 Location: Georgetown Kentucky Posts: 203	Re: parting out 68 c10 Sorry man, I sold the bed a couple of weeks ago Posted via Mobile Device

01-10-2013, 07:46 PM	#142
BigRed76 Registered User Join Date: Jan 2010 Location: Loveland, CO Posts: 1,921	Re: parting out 68 c10 I need the underdash a/c airbox, I believe its called the diverter box. do you have one? __________________ Zach 1970 Chevrolet Custom Camper K20 1971 GMC Super K2500, 12V/NV4500 swap in progress 1971 Chevrolet Custom C10 1972 Chevrolet Custom Deluxe C20, 5.3/4L60E 1972 Oldsmobile Cutlass Supreme, 455/TH400, 3.73 posi 2004 GMC Sierra 2500HD, LB7/Allison, CCSB 2005 GMC Sierra 1500, 5.3/4L60E, CCSB

01-22-2013, 06:42 PM	#145
Nathans71 Registered User Join Date: Jan 2007 Location: Mt. Washington Kentucky Posts: 97	Re: parting out 68 c10 Did you sell the calipers? Also interested in inner fender. Live in Louisville so could quick trip it over so you want have to look at shipping. Thanks.

01-22-2013, 06:59 PM	#146
nobolt Registered User Join Date: Oct 2011 Location: Algonac, MI 48001 Posts: 1,848	Re: parting out 68 c10 i bought the 68 grille...Joe does a great job packing and shipping...a pleasure to deal with! thanks again Joe! __________________ Dave "... government even in its best state is but a necessary evil. Thomas Paine "It wasn't a lie, it was ineptitude with insufficient cover." Donald Draper (Mad Men)

02-01-2013, 10:00 PM	#149
the_69_C10 Registered User Join Date: Dec 2012 Location: Tifton, Georgia Posts: 115	Re: parting out 68 c10 Shipping on lower ball joints (both) to 31794 __________________ 1969 C-10 SWB Project 2002 Chevy Silverado Ext Cab LS Build Thread--> "Start of Something New" http://67-72chevytrucks.com/vboard/s...d.php?t=557900

02-03-2013, 12:25 AM	#150
bigjoe77 Registered User Join Date: Oct 2010 Location: Georgetown Kentucky Posts: 203	Re: parting out 68 c10 I'm pretty sure I can squeeze those into a $5.80 flat rate box.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.