What did you do to your truck today part III - Page 61 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

scuderia · 08-30-2015, 11:40 AM

Ordered a new Fuel Pump! Since putting in my 292 (used CL) it's had a pretty good tick. The motor starts and runs fine, good even. Doesn't smoke or seem to burn oil. Does have a couple of good oil leaks (oil pan and maybe rear seal) but this tick has been really bugging me. I've been reluctant to deal with the oil leaks only to have the thing grenade on me... Anyway, I've adjusted the valves a couple times and tightened the exhaust etc. but nothing made a difference.
So yesterday I was changing some grommets on the valve cover (one leak I figured I could at least address) and I fired it up and for whatever reason it I could suddenly tell the tick wasn't coming from up top. I grabbed a long screwdriver and sure enough the only place you can hear the tick is from the damn fuel pump!! Won't know for sure till I get the new one in but fingers crossed.

Lugnutz65 · 08-30-2015, 02:04 PM

Quote:

Originally Posted by LT1 Burb

I installed my exhaust system, fixed a leaking diff gasket, bled my master and installed it, installed my radio, air box, and speaker and started finishing up some small things that needed completion.

LT1 Burb,
Truck looks great! Really great! Please tell me about the hole(s) you have cut in the firewall on the PS. I assume they are for AC since I see a compressor and AC vents. How did you decide where to cut holes and what will you install? Vintage Air?

**TJ's Chevy** · 08-30-2015, 07:25 PM

Got the front hubs and wheels on. Then rolled the chassis out for some fresh air.

**Classic v6 GMC's** · 08-30-2015, 08:10 PM

Quote:

Originally Posted by TJ's Chevy

I got my engine and tranny mounted!

Looking good!!

LT1 Burb · 08-30-2015, 08:43 PM

Quote:

Originally Posted by Lugnutz65

LT1 Burb,
Truck looks great! Really great! Please tell me about the hole(s) you have cut in the firewall on the PS. I assume they are for AC since I see a compressor and AC vents. How did you decide where to cut holes and what will you install? Vintage Air?

THx, Its a factory Air cab, going back with OEM stuff.

**TJ's Chevy** · 08-30-2015, 09:04 PM

Quote:

Originally Posted by Classic v6 GMC's

Looking good!!

Thanks! Feels good to! lol

revjames · 08-30-2015, 09:21 PM

Finally got the hubs and calipers on I am suppose to get my parking brake in the mail tomorrow from inline. That's all that stands between me and a roller.

**Chevy Fleetside** · 08-30-2015, 10:37 PM

I didn't work on my truck today but I did work on my brothers car. I am putting disc brakes in his 64 Valiant. I am using discs from a 75 Duster. As I was changing the wheel bearings I notice this on the left rotor. I guess he took his car to Midas to have the brakes done. Someone put the seals in backwards.

jbgroby · 08-30-2015, 11:15 PM

Got a call from the painter who wanted to go over the paint colors and have them verified before spraying. If all goes well the bed should be finished by Sept 12.

markeb01 · 08-30-2015, 11:26 PM

Wow! Won't that be a sweet thing after all these years.

jbgroby · 08-31-2015, 10:13 AM

Yes it will be!!!, note the extra holes that the PO drill in the tail light area instead of getting some speed nuts. does not hurt anything, but WHY?? The painter also undercoated the insides of the bed as well. The sides are finally straight as well.

**The Rocknrod** · 08-31-2015, 10:40 AM

Quote:

Originally Posted by revjames

Finally got the hubs and calipers on I am suppose to get my parking brake in the mail tomorrow from inline. That's all that stands between me and a roller.

Whats that little tab hanging off your upper ball joint? Where did you get it?

Grizz1963 · 08-31-2015, 11:15 AM

I was going to find some procrastination project to do, then realised the inner fenders will never clean themselves.

Both sides are now ready for paint prep, primer coat followed by Satin Black Two Pack paint.

Today after the inner fenders I finished reassembly of the heater unit and packed it away.

The lid is away with Ian Brown for some special under hood treatment.

The red you can see is a high density foam gasket I made to seal the fan to the metal case.

Eagletucky · 08-31-2015, 02:37 PM

I finished up shortening my '66 Suburban 3", in preparation for a body swap on a 2006 Trailblazer SS. I also removed the stock burb floor in one piece:

LT1 Burb · 08-31-2015, 02:47 PM

Quote:

Originally Posted by Eagletucky

I finished up shortening my '66 Suburban 3", in preparation for a body swap on a 2006 Trailblazer SS. I also removed the stock burb floor in one piece:

Thats gonna be wild, brave guy!

Turtleman · 08-31-2015, 07:02 PM

Quote:

Originally Posted by Eagletucky

I finished up shortening my '66 Suburban 3", in preparation for a body swap on a 2006 Trailblazer SS. I also removed the stock burb floor in one piece:

I hope you start a build topic for that,, I'm guessing theres ALLOT of people here that would be interested in how all that fits together

Grizz1963 · 09-01-2015, 02:06 AM

Quote:

Originally Posted by Eagletucky

I finished up shortening my '66 Suburban 3", in preparation for a body swap on a 2006 Trailblazer SS. I also removed the stock burb floor in one piece:

That should be very good.

I am not that clever or brave.

Build thread please, or some thread for us to ooooohhh and aaaahhhh and be amazed by.

BenkeBird · 09-01-2015, 11:48 AM

I have weld some sheetmetal on my -62 panel this last week.

Northwest Outlaw · 09-01-2015, 03:01 PM

Not necessarily "today" but most recently (took me a week) I rebuilt the Rochester BV carburetor on my mystery year 250 i6.
Used a rebuild kit from Mike's Carburetors (www.carburetor-parts.com/) but had to order some extra bowl gaskets to overcome the warped parts!
Also took a wire brush on the grinder and cleaned off the rust and old paint from the air cleaner. I really like the "polished patina" look when it was done so I hit it with a glossy clear coat. Thinking i'll do the valve cover and push rod covers the same.
Not big steps I know, but she's running and driving again and pretty smooth too!

65Gregg · 09-01-2015, 08:28 PM

In wanted holes in the firewall are patched and the floors covered with POR-15, tomorrow I'll start with the Rattletrap. Slow but at least it's progress

**Palf70Step** · 09-01-2015, 09:07 PM

That looks very nice!

65Gregg · 09-03-2015, 12:29 AM

Quote:

Originally Posted by Palf70Step

That looks very nice!

Thank you, it's almost all covered with insulation now.

Grizz1963 · 09-03-2015, 04:44 PM

Ordered my full set of mouldings and stainless bed strips from Mar-K today through Clem's Tuba Trucks.

Thanks Clem.

Got home tonight and found this had arrived in the post from Ian Brown.

I already reported on this cover, but have to say, in hand, it is even more impressive.

I am seriously pleased and impressed with it. It is so difficult to capture the texture and look of this piece in a photo.

Of course I had to go trial fit it as well.

Very pleased, very very pleased.

**pimpston65** · 09-03-2015, 06:54 PM

Quote:

Originally Posted by Eagletucky

I finished up shortening my '66 Suburban 3", in preparation for a body swap on a 2006 Trailblazer SS. I also removed the stock burb floor in one piece:

what are you gonna use as the floor?

Eagletucky · 09-03-2015, 09:42 PM

Ill post more pics in a build thread in the near future.

Im using the floor and firewall out of the Trailblazer SS.

08-30-2015, 11:40 AM	#1501
scuderia Registered User Join Date: May 2014 Location: SAN FRANCISCO Posts: 447	Re: What did you do to your truck today part III Ordered a new Fuel Pump! Since putting in my 292 (used CL) it's had a pretty good tick. The motor starts and runs fine, good even. Doesn't smoke or seem to burn oil. Does have a couple of good oil leaks (oil pan and maybe rear seal) but this tick has been really bugging me. I've been reluctant to deal with the oil leaks only to have the thing grenade on me... Anyway, I've adjusted the valves a couple times and tightened the exhaust etc. but nothing made a difference. So yesterday I was changing some grommets on the valve cover (one leak I figured I could at least address) and I fired it up and for whatever reason it I could suddenly tell the tick wasn't coming from up top. I grabbed a long screwdriver and sure enough the only place you can hear the tick is from the damn fuel pump!! Won't know for sure till I get the new one in but fingers crossed. __________________ '66 C10 SWB '64 C2 roadster '38 Indian Scout Flattracker '70 Triumph T120R '81 Laverda Jota

08-30-2015, 07:25 PM	#1503
TJ's Chevy Post Whore Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: What did you do to your truck today part III Got the front hubs and wheels on. Then rolled the chassis out for some fresh air. Attached Images __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

08-30-2015, 09:21 PM	#1507
revjames Registered User Join Date: Feb 2015 Location: PONCA CITY Posts: 132	Re: What did you do to your truck today part III Finally got the hubs and calipers on I am suppose to get my parking brake in the mail tomorrow from inline. That's all that stands between me and a roller. Attached Images

08-30-2015, 10:37 PM	#1508
Chevy Fleetside Registered User Join Date: Sep 2006 Location: San Francisco Posts: 4,779	Re: What did you do to your truck today part III I didn't work on my truck today but I did work on my brothers car. I am putting disc brakes in his 64 Valiant. I am using discs from a 75 Duster. As I was changing the wheel bearings I notice this on the left rotor. I guess he took his car to Midas to have the brakes done. Someone put the seals in backwards. Attached Images __________________ "A man and his truck, what a beautiful thing" 65 Short Fleetside BBC 65 Long Fleetside 283 3 on the tree for now. my build thread http://www.67-72chevytrucks.com/vboa...d.php?t=259536

08-30-2015, 11:15 PM	#1509
jbgroby Registered User Join Date: Nov 2008 Location: Lacombe, LA Posts: 2,770	Re: What did you do to your truck today part III Got a call from the painter who wanted to go over the paint colors and have them verified before spraying. If all goes well the bed should be finished by Sept 12. Attached Images __________________ http://s1299.photobucket.com/user/jb...23904108567829

08-30-2015, 11:26 PM	#1510
markeb01 Senior Enthusiast Join Date: Feb 2007 Location: Spokane Valley, WA Posts: 8,356	Re: What did you do to your truck today part III Wow! Won't that be a sweet thing after all these years. __________________ My Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=444502

08-31-2015, 10:13 AM	#1511
jbgroby Registered User Join Date: Nov 2008 Location: Lacombe, LA Posts: 2,770	Re: What did you do to your truck today part III Yes it will be!!!, note the extra holes that the PO drill in the tail light area instead of getting some speed nuts. does not hurt anything, but WHY?? The painter also undercoated the insides of the bed as well. The sides are finally straight as well. Attached Images __________________ http://s1299.photobucket.com/user/jb...23904108567829 Last edited by jbgroby; 08-31-2015 at 10:22 AM.

08-31-2015, 11:15 AM	#1513
Grizz1963 Registered User Join Date: Dec 2012 Location: Rochester, KENT Posts: 10,507	Re: What did you do to your truck today part III I was going to find some procrastination project to do, then realised the inner fenders will never clean themselves. Both sides are now ready for paint prep, primer coat followed by Satin Black Two Pack paint. Today after the inner fenders I finished reassembly of the heater unit and packed it away. The lid is away with Ian Brown for some special under hood treatment. The red you can see is a high density foam gasket I made to seal the fan to the metal case. __________________ MY BUILD LINK: http://67-72chevytrucks.com/vboard/s...585901]Redneck Express - 1966 C10 Short Fleetside MY USA ROADTRIPS http://forum.retro-rides.org/thread/...2018-humdinger IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM MATE.

08-31-2015, 02:37 PM	#1514
Eagletucky Where did THAT bolt go? Join Date: Feb 2009 Location: Speedway, Indiana Posts: 306	Re: What did you do to your truck today part III I finished up shortening my '66 Suburban 3", in preparation for a body swap on a 2006 Trailblazer SS. I also removed the stock burb floor in one piece: Attached Images __________________ The Swiss Car Club......A drinking club with a car problem....

09-01-2015, 11:48 AM	#1518
BenkeBird Registered User Join Date: May 2012 Location: Sweden Posts: 34	Re: What did you do to your truck today part III I have weld some sheetmetal on my -62 panel this last week. Attached Images

09-01-2015, 03:01 PM	#1519
Northwest Outlaw Registered User Join Date: Jul 2015 Location: Seattle Posts: 228	Re: What did you do to your truck today part III Not necessarily "today" but most recently (took me a week) I rebuilt the Rochester BV carburetor on my mystery year 250 i6. Used a rebuild kit from Mike's Carburetors (www.carburetor-parts.com/) but had to order some extra bowl gaskets to overcome the warped parts! Also took a wire brush on the grinder and cleaned off the rust and old paint from the air cleaner. I really like the "polished patina" look when it was done so I hit it with a glossy clear coat. Thinking i'll do the valve cover and push rod covers the same. Not big steps I know, but she's running and driving again and pretty smooth too! Attached Images __________________ 1961 Chevy Apache "BoomStick" -First build, lots of plans, little experience. What's the worst that could happen? http://67-72chevytrucks.com/vboard/s...d.php?t=694506

09-01-2015, 08:28 PM	#1520
65Gregg Registered User Join Date: Jul 2006 Location: Willis, Texas Posts: 754	Re: What did you do to your truck today part III In wanted holes in the firewall are patched and the floors covered with POR-15, tomorrow I'll start with the Rattletrap. Slow but at least it's progress Attached Images __________________ 65Gregg Blue long bed White TBSS 61 Impala “The two most important days in your life are the day you are born and the day you find out why.” Mark Twain

09-01-2015, 09:07 PM	#1521
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,748	Re: What did you do to your truck today part III That looks very nice! __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

09-03-2015, 04:44 PM	#1523
Grizz1963 Registered User Join Date: Dec 2012 Location: Rochester, KENT Posts: 10,507	Re: What did you do to your truck today part III Ordered my full set of mouldings and stainless bed strips from Mar-K today through Clem's Tuba Trucks. Thanks Clem. Got home tonight and found this had arrived in the post from Ian Brown. I already reported on this cover, but have to say, in hand, it is even more impressive. I am seriously pleased and impressed with it. It is so difficult to capture the texture and look of this piece in a photo. Of course I had to go trial fit it as well. Very pleased, very very pleased. __________________ MY BUILD LINK: http://67-72chevytrucks.com/vboard/s...585901]Redneck Express - 1966 C10 Short Fleetside MY USA ROADTRIPS http://forum.retro-rides.org/thread/...2018-humdinger IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM MATE.

09-03-2015, 09:42 PM	#1525
Eagletucky Where did THAT bolt go? Join Date: Feb 2009 Location: Speedway, Indiana Posts: 306	Re: What did you do to your truck today part III Ill post more pics in a build thread in the near future. Im using the floor and firewall out of the Trailblazer SS. __________________ The Swiss Car Club......A drinking club with a car problem....



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.