1967 C10 Custom Big Window - Page 64 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Slick67 · 10-12-2011, 10:23 PM

Quote:

Originally Posted by 67cheby

yep ....ordering mine tomorrow..perfect fit !! plenty firewall clearance ?

They fit really good, if they were any wider it would have a gap at the edges. When they are tightened down they snug up really nice. The firewall has at least 3.5 inches of clearance and the driver side firewall almost looks like it was made to accomodate them. I drove around the block 3 times and checked for any oil around them and could not find any leaks, so I am confident they'll work out!

**67cheby** · 10-12-2011, 10:27 PM

SWEET and they look great too..for under $100 and what 30 min install ?

Slick67 · 10-12-2011, 10:32 PM

Quote:

Originally Posted by 67cheby

SWEET and they look great too..for under $100 and what 30 min install ?

Yep, around $78 about 30 minutes a side.

77chris03 · 10-12-2011, 11:00 PM

So when do I get to take her for a spin? Honestly I've never driven our model!!!
Posted via Mobile Device

Slick67 · 10-12-2011, 11:09 PM

Quote:

Originally Posted by 77chris03

So when do I get to take her for a spin? Honestly I've never driven our model!!!
Posted via Mobile Device

WHAT?!?!?! When I get it runnin just right, swing by.

77chris03 · 10-12-2011, 11:16 PM

Seriously?? I'll bring the beer!!! The Orange one was the first on ive sat in!!!
Posted via Mobile Device

Slick67 · 10-12-2011, 11:34 PM

Quote:

Originally Posted by 77chris03

Seriously?? I'll bring the beer!!! The Orange one was the first on ive sat in!!!
Posted via Mobile Device

We'll keep it here in the hood. I don't have tags yet!!!! I have nothin going on Friday evening, you guys are more than welcome to swing by and have a refreshing adult beverage with me.

71Sleeper · 10-13-2011, 12:16 AM

Quote:

Originally Posted by Slick67

Of course the main bracket only works with headers, but you probably already knew that. Hope this settup works for well for you!

I know the bracket is made for headers but I am not able to install the headers right now. So what I did was just cut a couple of 1/2" spacers to bring the main bracket out. Seems to be real sturdy. But I have a clearance issue with the alternator on the bracket itself. I can only rotate the top of the alternator about an inch before the case of it bottoms out on the main bracket. Leaving me not much to adjust a belt with. I was wondering if you had the same issue?

Slick67 · 10-13-2011, 09:57 AM

Quote:

Originally Posted by 71Sleeper

I know the bracket is made for headers but I am not able to install the headers right now. So what I did was just cut a couple of 1/2" spacers to bring the main bracket out. Seems to be real sturdy. But I have a clearance issue with the alternator on the bracket itself. I can only rotate the top of the alternator about an inch before the case of it bottoms out on the main bracket. Leaving me not much to adjust a belt with. I was wondering if you had the same issue?

Actually I did. Once everything is together you should be able to lean it further toward the driver inner fender. I had another alternator on it and did a little grinding so I could have some adjustment, but after I tilted it out more it didn't need grinding and I have at least 3 inches of adjustment. If you need a belt part number it's a Gates 7541 XL, and here is a pic that might help. I may have already posted it, but you can see that the mounting tab on the alt is almost horizontal.
Name: SAM_1498.jpg
Views: 960
Size: 47.7 KB

Name: SAM_1498.jpg
Views: 960
Size: 47.7 KB

71Sleeper · 10-13-2011, 02:25 PM

Thanks for the feedback. I was thinking that maybe once I got the belt on and was able to tighten all the brackets thing might line up a little better. I also found out that the brackets from a 63 thru 67 327 corvette will work perfect with my setup too.

Slick67 · 10-13-2011, 06:45 PM

Quote:

Originally Posted by 71Sleeper

Thanks for the feedback. I was thinking that maybe once I got the belt on and was able to tighten all the brackets thing might line up a little better. I also found out that the brackets from a 63 thru 67 327 corvette will work perfect with my setup too.

No problem! I bet the brackets for the Corvette are probably a little more pricey!

71Sleeper · 10-13-2011, 07:10 PM

Quote:

Originally Posted by Slick67

No problem! I bet the brackets for the Corvette are probably a little more pricey!

Yes about $60 more and are painted black.

Slick67 · 10-15-2011, 01:51 AM

Well, 77chris03 just left with his happy g-freind Brittany (future member) and he was really pumped about working on his truck after seeing were mine was at on the build, hope that gives you the kick in the pants for motivation Chris!!! Take your time and do it right!!!!

Slick67 · 10-15-2011, 02:00 AM

Oh yeah. He said take a pic of it in the garage, it looked cool. Well, here it is bro........with all the junk behind it.
Name: SAM_1519.jpg
Views: 964
Size: 44.9 KB

71Sleeper · 10-15-2011, 10:32 AM

Man I wish I had a big garage like that. Truck looks really good setting there. I bet you still get up every morning and take a peak at it.

Hollywood Knight · 10-15-2011, 10:46 AM

I'd be real proud having this truck in my garage . great work !

propanemudtruck · 10-16-2011, 09:32 AM

Quote:

Originally Posted by Hollywood Knight

I'd be real proud having this truck in my garage . great work !

x2!

Slick67 · 10-16-2011, 12:04 PM

Quote:

Originally Posted by 71Sleeper

Man I wish I had a big garage like that. Truck looks really good setting there. I bet you still get up every morning and take a peak at it.

The garage isn't that big really, it's a little cramped with all of the woman's holiday decorations for the house. I admit, almost everyday the garage door comes up. Before I brought the truck home it got opened maybe 3 times a week.

Quote:

Originally Posted by Hollywood Knight

I'd be real proud having this truck in my garage . great work !

Thank you! I still have new car jitters when I look at it.....is that wrong?

Quote:

Originally Posted by propanemudtruck

x2!

Hey Bro! Thanks for droppin by the thread, it's been awhile.

71Sleeper · 10-16-2011, 06:25 PM

Well, its about that time to get those women decorations out. lol That's what I have been doing this weekend. getting it all out just to put over half it back up into storage until the next holiday. FUN!!!!

Slick67 · 10-16-2011, 11:12 PM

Quote:

Originally Posted by 71Sleeper

Well, its about that time to get those women decorations out. lol That's what I have been doing this weekend. getting it all out just to put over half it back up into storage until the next holiday. FUN!!!!

We have garage sale junk at the front door so we can get it out easy, that should help alot when it's gone. All of the clutter can be organized and we might be able to come to an agreement on the amount of foofy decorations that she actually keeps!

Slick67 · 10-29-2011, 08:03 PM

Don't forget to vote for the November TOTM 2011!!! I've been nominated!!! Click on Home in the top toolbar to vote, it's on the bottom left!!

Here's the link to help ya out.

http://67-72chevytrucks.com/

Name: SAM_0402_1.jpg
Views: 822
Size: 45.5 KB

Name: SAM_0402_1.jpg
Views: 822
Size: 45.5 KB

Name: SAM_0402.jpg
Views: 824
Size: 39.8 KB

mcbassin · 10-29-2011, 09:07 PM

Your truck looks great! Should win the TOTM.
HERE
is a direct link to vote. Good luck buddy!

VA72C10 · 10-29-2011, 09:27 PM

we need to get behind him

**67cheby** · 10-30-2011, 12:33 AM

got er done !! you deserve it !!

slick copper · 10-30-2011, 01:01 AM

Voted for ya bud! Lotta nice trucks, but I'm partial to yours! Can't wait till mine's worthy of TOTM!

10-12-2011, 10:27 PM	#1577
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 1967 C10 Custom Big Window SWEET and they look great too..for under $100 and what 30 min install ? __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

10-12-2011, 11:00 PM	#1579
77chris03 Registered User Join Date: Jun 2009 Location: CoNrOe Tx Posts: 1,343	Re: 1967 C10 Custom Big Window So when do I get to take her for a spin? Honestly I've never driven our model!!! Posted via Mobile Device __________________ 68 C10 Stepper #1- GONE 68 C10 Stepper #2 1977 Chevy Cheyenne...gone...was my first Chevy 04 Tahoe Z71, 04 Silverado 2500HD, 04 Sierra 2500HD 99 Sierra Stepside, 17 Denali HD, 84 K10 My 1st build-- http://67-72chevytrucks.com/vboard/s...d.php?t=379333 My 2nd build-- http://67-72chevytrucks.com/vboard/s...d.php?t=700310

10-12-2011, 11:16 PM	#1581
77chris03 Registered User Join Date: Jun 2009 Location: CoNrOe Tx Posts: 1,343	Re: 1967 C10 Custom Big Window Seriously?? I'll bring the beer!!! The Orange one was the first on ive sat in!!! Posted via Mobile Device __________________ 68 C10 Stepper #1- GONE 68 C10 Stepper #2 1977 Chevy Cheyenne...gone...was my first Chevy 04 Tahoe Z71, 04 Silverado 2500HD, 04 Sierra 2500HD 99 Sierra Stepside, 17 Denali HD, 84 K10 My 1st build-- http://67-72chevytrucks.com/vboard/s...d.php?t=379333 My 2nd build-- http://67-72chevytrucks.com/vboard/s...d.php?t=700310

10-13-2011, 02:25 PM	#1585
71Sleeper Registered User Join Date: Jul 2011 Location: Phenix City, AL Posts: 993	Re: 1967 C10 Custom Big Window Thanks for the feedback. I was thinking that maybe once I got the belt on and was able to tighten all the brackets thing might line up a little better. I also found out that the brackets from a 63 thru 67 327 corvette will work perfect with my setup too. __________________ 71 Ol' Blue: http://67-72chevytrucks.com/vboard/s...d.php?t=474752 Carving the Jake-olantern: http://67-72chevytrucks.com/vboard/s...d.php?t=679537

10-15-2011, 01:51 AM	#1588
Slick67 Sofa King Crazy!! Join Date: Oct 2008 Location: Houston, TX Posts: 3,090	Re: 1967 C10 Custom Big Window Well, 77chris03 just left with his happy g-freind Brittany (future member) and he was really pumped about working on his truck after seeing were mine was at on the build, hope that gives you the kick in the pants for motivation Chris!!! Take your time and do it right!!!! __________________ You found the Tater. *My Blazer Build (New)* - http://67-72chevytrucks.com/vboard/s...d.php?t=654650 *My 67 Build* - http://67-72chevytrucks.com/vboard/s...d.php?t=335650 67 Chevy LWB big window a/c AKA TOTALLED BY A JACKASS. 1972 2wd Blazer "Porterbuilt and Sloshed"

10-15-2011, 02:00 AM	#1589
Slick67 Sofa King Crazy!! Join Date: Oct 2008 Location: Houston, TX Posts: 3,090	Re: 1967 C10 Custom Big Window Oh yeah. He said take a pic of it in the garage, it looked cool. Well, here it is bro........with all the junk behind it. __________________ You found the Tater. *My Blazer Build (New)* - http://67-72chevytrucks.com/vboard/s...d.php?t=654650 *My 67 Build* - http://67-72chevytrucks.com/vboard/s...d.php?t=335650 67 Chevy LWB big window a/c AKA TOTALLED BY A JACKASS. 1972 2wd Blazer "Porterbuilt and Sloshed"

10-15-2011, 10:32 AM	#1590
71Sleeper Registered User Join Date: Jul 2011 Location: Phenix City, AL Posts: 993	Re: 1967 C10 Custom Big Window Man I wish I had a big garage like that. Truck looks really good setting there. I bet you still get up every morning and take a peak at it. __________________ 71 Ol' Blue: http://67-72chevytrucks.com/vboard/s...d.php?t=474752 Carving the Jake-olantern: http://67-72chevytrucks.com/vboard/s...d.php?t=679537

10-15-2011, 10:46 AM	#1591
Hollywood Knight Junior Member Join Date: Mar 2007 Location: mesa az. Posts: 326	Re: 1967 C10 Custom Big Window I'd be real proud having this truck in my garage . great work !

10-16-2011, 06:25 PM	#1594
71Sleeper Registered User Join Date: Jul 2011 Location: Phenix City, AL Posts: 993	Re: 1967 C10 Custom Big Window Well, its about that time to get those women decorations out. lol That's what I have been doing this weekend. getting it all out just to put over half it back up into storage until the next holiday. FUN!!!! __________________ 71 Ol' Blue: http://67-72chevytrucks.com/vboard/s...d.php?t=474752 Carving the Jake-olantern: http://67-72chevytrucks.com/vboard/s...d.php?t=679537

10-29-2011, 08:03 PM	#1596
Slick67 Sofa King Crazy!! Join Date: Oct 2008 Location: Houston, TX Posts: 3,090	Re: 1967 C10 Custom Big Window Don't forget to vote for the November TOTM 2011!!! I've been nominated!!! Click on Home in the top toolbar to vote, it's on the bottom left!! Here's the link to help ya out. http://67-72chevytrucks.com/ __________________ You found the Tater. *My Blazer Build (New)* - http://67-72chevytrucks.com/vboard/s...d.php?t=654650 *My 67 Build* - http://67-72chevytrucks.com/vboard/s...d.php?t=335650 67 Chevy LWB big window a/c AKA TOTALLED BY A JACKASS. 1972 2wd Blazer "Porterbuilt and Sloshed" Last edited by Slick67; 10-29-2011 at 08:12 PM.

10-29-2011, 09:07 PM	#1597
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: 1967 C10 Custom Big Window Your truck looks great! Should win the TOTM. HERE is a direct link to vote. Good luck buddy! __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

10-29-2011, 09:27 PM	#1598
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: 1967 C10 Custom Big Window we need to get behind him __________________ Looking for a 67-72 swb or blazer project in or around VA.

10-30-2011, 12:33 AM	#1599
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 1967 C10 Custom Big Window got er done !! you deserve it !! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

10-30-2011, 01:01 AM	#1600
slick copper Registered User Join Date: Aug 2010 Location: Richmond, KY Posts: 1,137	Re: 1967 C10 Custom Big Window Voted for ya bud! Lotta nice trucks, but I'm partial to yours! Can't wait till mine's worthy of TOTM! __________________ Raymond 1967 Chevy C/10 LWB Custom Optioned "big window truck" AKA Copper. My build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=452594 The story of how I got the truck:http://67-72chevytrucks.com/vboard/s...d.php?t=450939 Ole Smokey Build Thread 2002 Silverado 8.1L Crew Cab SOLDhttp://67-72chevytrucks.com/vboard/s...d.php?t=618402



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.