SoCal checkin' in - Page 68 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

VDOG · 08-02-2013, 12:41 PM

Quote:

Originally Posted by Keithpep

I know it's not considered So. cal, but how many members hail from Bakersfield?
Posted via Mobile Device

We call it SoCal Checking in, but if you start at the first page, you will see members from all over Cali and other states. This is how we all met. The members in Fresno, A****er, Sactown, AZ, Utah, Nevada, etc, we met here.

Im sure there are a few near you. Search this post because everyone does not check in all the time. Even though your in Bakersfield, your part of SoCal.

**Ol Blue K20** · 08-02-2013, 12:45 PM

Quote:

Originally Posted by VDOG

We call it SoCal Checking in, but if you start at the first page, you will see members from all over Cali and other states. This is how we all met. The members in Fresno, A****er, Sactown, AZ, Utah, Nevada, etc, we met here.

Im sure there are a few near you. Search this post because everyone does not check in all the time. Even though your in Bakersfield, your part of SoCal.

I'm from Nor Cal and I still check in, also a lot of members haven't found this part of the forum yet...

cheyenne shortstep · 08-02-2013, 01:05 PM

Who's going to the Vista Rod Run Sun Aug 4th? It is a small town show but always a good time.

VDOG · 08-05-2013, 07:48 PM

Quote:

Originally Posted by ItsRandy

Hello (echo, echo, echo). Is anyone here (echo, echo, echo)?

What? Did you guys fall off the face of the earth?

Hey Randy, whats going on? Are you planning a cruise? Or need help with your truck? You know were down for a drive if you need help.

ItsRandy · 08-05-2013, 11:57 PM

Just gettin' ready to cut -n- buff my truck and I am scared to death. I need to try and get my paint to look as close to the paint on the prom queen as I can...real slick.

A cruise? I'm up for a cruise.

VDOG · 08-06-2013, 08:00 PM

Quote:

Originally Posted by ItsRandy

Just gettin' ready to cut -n- buff my truck and I am scared to death. I need to try and get my paint to look as close to the paint on the prom queen as I can...real slick.

A cruise? I'm up for a cruise.

So I take it your color sanding? Cool. I can help,.....bring the beer and a chair and watch. Dont know if I want to help and make a mistake.
Let me know.

69Rumbler · 08-06-2013, 08:11 PM

I got a dynabrade sander lol
Posted via Mobile Device

Lee H · 08-06-2013, 08:34 PM

Stay away from the sheep, that's old school, foam and 3M materials. Start light, you can always get more aggressive if needed. I'd start with 2500 and 3M perfect it 2. If that does not cut it, try 2000, maybe perfect it 1. The compound and the pads are a set, don't mix them up.
Posted via Mobile Device

ItsRandy · 08-06-2013, 09:23 PM

Quote:

Originally Posted by VDOG

So I take it your color sanding? Cool. I can help,.....bring the beer and a chair and watch. Dont know if I want to help and make a mistake.
Let me know.

Thanks for the offer Vince but I think this is something I need to screw up all on my own. I need to learn how to do it and I'm not much fun when I'm learning.

I'm gonna' blame any mistakes on you anyway. LOL!

ItsRandy · 08-06-2013, 09:49 PM

Quote:

Originally Posted by Lee H

Stay away from the sheep, that's old school, foam and 3M materials. Start light, you can always get more aggressive if needed. I'd start with 2500 and 3M perfect it 2. If that does not cut it, try 2000, maybe perfect it 1. The compound and the pads are a set, don't mix them up.
Posted via Mobile Device

I'm gonna' use the 3M perfect it stuff. Foam pads for sure. What's the difference between perfect it 1 and perfect it 2?

My wife bought me a variable speed buffer for my birthday (isn't she great!), so I have that covered. I have all the sand paper I should need (1500 - 2000). I will order the compound and buffing pads (white, black and blue) so I guess I'm ready to go this weekend.

VDOG · 08-07-2013, 11:51 AM

Quote:

Originally Posted by ItsRandy

I'm gonna' use the 3M perfect it stuff. Foam pads for sure. What's the difference between perfect it 1 and perfect it 2?

My wife bought me a variable speed buffer for my birthday (isn't she great!), so I have that covered. I have all the sand paper I should need (1500 - 2000). I will order the compound and buffing pads (white, black and blue) so I guess I'm ready to go this weekend.

Well seeing that you have all the proper equipment, then I guess it might be safe for me to help,....hand you a beer as I watch.

J/K, let me know if I can help.

JOHNORO · 08-12-2013, 11:32 PM

Quote:

Originally Posted by ItsRandy

Just gettin' ready to cut -n- buff my truck and I am scared to death. I need to try and get my paint to look as close to the paint on the prom queen as I can...real slick.

Be careful what you wish for
I call her the "Prom Queen" for a reason
Sure she looks good from across the room
But deep down she has issues

Posted via Mobile Device
Posted via Mobile Device

VDOG · 08-13-2013, 06:43 PM

Quote:

Originally Posted by ItsRandy

Thanks for the offer Vince but I think this is something I need to screw up all on my own. I need to learn how to do it and I'm not much fun when I'm learning.

I'm gonna' blame any mistakes on you anyway. LOL!

I missed this. LOL
Thats ok I get blame for stuff all the time. Like getting lost going to Escondido and something about being on the grassy noll in dallas years ago.

C0UCH · 08-15-2013, 07:22 PM

Quote:

Originally Posted by C0UCH

Anyone going to the Long Beach swap meet tomorrow? I've got a set of inner fenders out of my 67 that I've got to get rid of. Good shape, just taking up space in my shop and I'm not going to use them.

I'll have some C/10 Club openers with me too.

Posted via Mobile Device

Hey Guys,

I still have these inner fenders, and a lot of other parts laying around now in my shop. I'm trying to clean everything out so I can make room for the build. If anyone in the area is interested I'll let these and most everything else go pretty cheap. PM for details if interested.

69Rumbler · 08-15-2013, 07:36 PM

How much for the c10 opener ?
Posted via Mobile Device

ItsRandy · 08-15-2013, 09:59 PM

Quote:

Originally Posted by JOHNORO

Be careful what you wish for
I call her the "Prom Queen" for a reason
Sure she looks good from across the room
But deep down she has issues

Posted via Mobile Device
Posted via Mobile Device

A girl with "issues", I've had more than one of those.

ItsRandy · 08-18-2013, 10:06 PM

Started color sanding (cut -n- buff) my truck. I was scared to because I had never done it before. Prom Queen watch out!

Dano69c10 · 08-19-2013, 12:44 PM

Nice Job on the color sanding, I can almost see Vince drinkin' a beer in the reflection.

VDOG · 08-20-2013, 04:45 PM

Quote:

Originally Posted by Dano69c10

Nice Job on the color sanding, I can almost see Vince drinkin' a beer in the reflection.

Yes that would be Root Beer. I was bringing the beer for all the spectators that was going to watch Randy work. Now some cognac, then I migh have to drink. LOL

looks great randy

VDOG · 08-20-2013, 04:47 PM

On another note, do you guys want to have a monthly breakfast or lunch get together? This is for all trucks, not just C-10's.

Just asking.

VWNate1 · 08-20-2013, 05:09 PM

Yes '

hopped up · 08-20-2013, 05:26 PM

Quote:

Originally Posted by VDOG

On another note, do you guys want to have a monthly breakfast or lunch get together? This is for all trucks, not just C-10's.

Just asking.

great idea vince!! you know im down
Posted via Mobile Device

hopped up · 08-20-2013, 05:28 PM

Quote:

Originally Posted by VDOG

I missed this. LOL
Thats ok I get blame for stuff all the time. Like getting lost going to Escondido and something about being on the grassy noll in dallas years ago.

blame you? now who would do that vdog! i was just following the lead truck whoever that was. jon was behind me and we only had 3 trucks! hmmm.... lol
Posted via Mobile Device

C0UCH · 08-20-2013, 06:08 PM

Quote:

Originally Posted by VDOG

On another note, do you guys want to have a monthly breakfast or lunch get together? This is for all trucks, not just C-10's.

Just asking.

Definitely, unfortunately I pulled the engine out of mine recently. Can I still meet up?

Dano69c10 · 08-20-2013, 10:37 PM

Quote:

Originally Posted by VDOG

On another note, do you guys want to have a monthly breakfast or lunch get together? This is for all trucks, not just C-10's.

Just asking.

If I can roll up in my 2007 Chevy Siverado

08-02-2013, 01:05 PM	#1678
cheyenne shortstep Registered User Join Date: Jul 2010 Location: Vista Ca. Posts: 2,405	Re: SoCal checkin' in Who's going to the Vista Rod Run Sun Aug 4th? It is a small town show but always a good time.

08-05-2013, 11:57 PM	#1680
ItsRandy Registered User Join Date: Nov 2010 Location: Grand Terrace, Ca. Posts: 1,607	Re: SoCal checkin' in Just gettin' ready to cut -n- buff my truck and I am scared to death. I need to try and get my paint to look as close to the paint on the prom queen as I can...real slick. A cruise? I'm up for a cruise.

08-06-2013, 08:11 PM	#1682
69Rumbler Registered User Join Date: Jan 2013 Location: Los Angeles Posts: 903	Re: SoCal checkin' in I got a dynabrade sander lol Posted via Mobile Device __________________ 1969 C20 CUSTOM "RUMBLEr"

08-06-2013, 08:34 PM	#1683
Lee H Registered User Join Date: Jun 2010 Location: Upland Ca Posts: 4,139	Re: SoCal checkin' in Stay away from the sheep, that's old school, foam and 3M materials. Start light, you can always get more aggressive if needed. I'd start with 2500 and 3M perfect it 2. If that does not cut it, try 2000, maybe perfect it 1. The compound and the pads are a set, don't mix them up. Posted via Mobile Device __________________ 1972 C10 SWB, Air, PS, PB, 350/350THM. Second owner. 1965 Corvette roadster, 44K miles, 327/365 SHP, 4 speed, side exhaust, knockoffs, teak, second owner (bought in 1970), Have ALL numbers matching components. My frame off restoration thread: http://67-72chevytrucks.com/vboard/s...d.php?t=556703

08-15-2013, 07:36 PM	#1690
69Rumbler Registered User Join Date: Jan 2013 Location: Los Angeles Posts: 903	Re: SoCal checkin' in How much for the c10 opener ? Posted via Mobile Device __________________ 1969 C20 CUSTOM "RUMBLEr"

08-18-2013, 10:06 PM	#1692
ItsRandy Registered User Join Date: Nov 2010 Location: Grand Terrace, Ca. Posts: 1,607	Re: SoCal checkin' in Started color sanding (cut -n- buff) my truck. I was scared to because I had never done it before. Prom Queen watch out! Attached Images

08-19-2013, 12:44 PM	#1693
Dano69c10 Senior Member Join Date: Jan 2005 Location: Ontario, Kali Posts: 2,427	Re: SoCal checkin' in Nice Job on the color sanding, I can almost see Vince drinkin' a beer in the reflection. __________________ '69 Fleet It ain't yours, if you didn't build it!

08-20-2013, 04:47 PM	#1695
VDOG Grand PooBaa Member Join Date: Jan 2001 Location: LA, CA Posts: 5,302	Re: SoCal checkin' in On another note, do you guys want to have a monthly breakfast or lunch get together? This is for all trucks, not just C-10's. Just asking.

08-20-2013, 05:09 PM	#1696
VWNate1 Registered User Join Date: Feb 2012 Location: So. Cali. Posts: 2,611	Re: SoCal checkin' in Yes ' __________________ -Nate Geezer '49 3100 235 W/ Muncie SM420 SOLD '69 C/10 shortbed sidemount survivor 250 L6 W/ 350TH



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.