01-17-2015, 11:57 PM | #151 |
Registered User
Join Date: Mar 2007
Location: Oakland, Ca
Posts: 1,382
|
Re: The "In over my head" build thread
Been keeping busy on some small tasks with the end goal of undercoating and getting the body back on the frame by Spring.
So with that in mind I started finishing things off on the Chassis that is essentially 95% done. I had my stock tank boiled out and lined because I was not happy at all with poly plastic tank - it's for sale if anyone is interested Also no one reproduces the rubber isolators that go under the tank straps and the tank flange so I've got some 1/8" sheet rubber coming and I will copy the original rubbers. Then I need to get the fuel lines finished off. Hard lines are in, just the rubber hose connections need to be put on. Then I turned back to getting the body ready for undercoating. I cut out the all the rust spots on the bed floor and will be patching in scavenged '68 long bed patches soon. Pics of the holes I cut in the floor - 5 spots in total were cut out. This is my first attempt at rust repair but I'm excited to learn. What's the worst that can happen? Rear tail gate area - both sides are like this. Crossmember was toast also but I will patch that also. 3 of the 4 wheel tub corners look like this, but this one was the worst one. I'll prep the patches soon and get these checked off my list. I am also stealing this "punch list" idea from the infamous "Low Buck Junkyard Build" - So here goes: TUB WORK
CHASSIS WORK
|
01-20-2015, 01:58 AM | #152 |
Registered User
Join Date: Aug 2013
Location: Central Coast, CA
Posts: 774
|
Re: The "In over my head" build thread
Thanks for your help today.. I'm pretty sure I'm going to buy a welder now even though I'm not quite sure how much I'll actually use it
Love the title of your build thread.. I believe I'm right there with you
__________________
My Build Thread 72 K5 http://67-72chevytrucks.com/vboard/s...d.php?t=628612 Build version 2.0: 72 K5 6.0 LQ9, 4L80e, NP205 http://67-72chevytrucks.com/vboard/s...d.php?t=793192 ____________________________________________ 1972 CST K5 Blazer Dark Olive |
01-30-2015, 09:10 PM | #153 |
Registered User
Join Date: Mar 2007
Location: Oakland, Ca
Posts: 1,382
|
Re: The "In over my head" build thread
Will hopefully get more time tomorrow to work on the K5.
Last few weekends I got a bit further on the bed patching. I also re-installed my original gas tank after the radiator shop was done with it. I made a set of 1/8" rubber isolators for the tank flange and straps using the originals as templates. Turned out really nice I think. Found starter bolts that were the correct 4 5/16" length for my starter, got radiator hoses and clamps installed, the BTO TV Made EZ kit installed, transmission cooler lines are almost in...lots more to do though. Here's an updated punch list: TUB WORK
CHASSIS WORK
|
02-03-2015, 01:57 AM | #154 |
Registered User
Join Date: Mar 2007
Location: Oakland, Ca
Posts: 1,382
|
Re: The "In over my head" build thread
Did a little work saturday on the plug wiring. Got these brackets from R&S. I think they'll work just fine.
Also been doing a bunch of research on SBC timing and decided to change out the springs, vacuum canister, and vacuum limit plate on my GM HEI distributor. Not much to look at it but it should help me get somewhere close to 14 deg. initial timing, 20 mechanical advance all in at 3200 rpm, then 12 degrees of vacuum advance. Then I can adjust from there. That's it for now. Will try to get the plug wires shortened soon since some are way too long for a clean look. Then off to all other little tasks left for the engine. |
08-07-2017, 12:02 PM | #155 |
Registered User
Join Date: Mar 2007
Location: Oakland, Ca
Posts: 1,382
|
Re: The "In over my head" build thread
8.7.17 - Turning the page
Hey everyone! After a long hiatus and a big life change I'm happy to say i'm moving forward with the K5 build. This was my view on Saturday as the body was picked up and taken to be worked on. Same shop that Mike (@72K5CSTDarkOlive) used in his build. I'll be sure and update with pics and progress along the way. Stay tuned! |
08-08-2017, 08:32 AM | #156 |
2WD Jimmy
Join Date: Mar 2005
Location: Davis County, Utah
Posts: 2,565
|
Re: The "In over my head" build thread
That rotisserie looks familiar!
|
01-21-2018, 05:47 PM | #157 |
Registered User
Join Date: Mar 2007
Location: Oakland, Ca
Posts: 1,382
|
Re: The "In over my head" build thread
Just a little update showing some rust repair:
At least the tailgate was nice Underside is now lined and they're prepping to paint the firewall and jams before mounting back on the frame! |
01-21-2018, 07:19 PM | #158 |
Registered User
Join Date: Aug 2013
Location: Central Coast, CA
Posts: 774
|
Re: The "In over my head" build thread
That shop looks awfully familiar
__________________
My Build Thread 72 K5 http://67-72chevytrucks.com/vboard/s...d.php?t=628612 Build version 2.0: 72 K5 6.0 LQ9, 4L80e, NP205 http://67-72chevytrucks.com/vboard/s...d.php?t=793192 ____________________________________________ 1972 CST K5 Blazer Dark Olive |
01-22-2018, 05:37 PM | #159 |
Registered User
Join Date: Mar 2007
Location: Oakland, Ca
Posts: 1,382
|
Re: The "In over my head" build thread
|
01-24-2018, 07:55 PM | #160 |
Registered User
Join Date: Dec 2017
Location: Garden City , NY
Posts: 492
|
Re: The "In over my head" build thread
Thanks, For the pictures. I need all the help I could get.
|
01-26-2018, 07:55 PM | #161 |
Registered User
Join Date: Mar 2007
Location: Oakland, Ca
Posts: 1,382
|
Re: The "In over my head" build thread
1/26/18
I'm in genuine awe. Even though I've thought about this moment for 8+ years I can't believe it's happened, and I can't believe how close to the finish line I am. |
01-26-2018, 11:29 PM | #162 |
Registered User
Join Date: Jun 2016
Location: Vancouver, Washington
Posts: 421
|
Re: The "In over my head" build thread
Awesome! The color looks great!
I'm so envious!!!
__________________
Full top blazer or bust.... |
01-30-2018, 09:02 PM | #163 |
Registered User
Join Date: Mar 2007
Location: Oakland, Ca
Posts: 1,382
|
Re: The "In over my head" build thread
1/30/2018 - A long time coming
I had to go back and look to the very first post I made in this thread. 2/4/2010 me and a small army took the body off the frame. It took nearly 8 years - but holy crap does THIS make me excited! |
01-31-2018, 08:07 AM | #164 |
Registered User
Join Date: Jun 2014
Location: Graham, WA
Posts: 283
|
Re: The "In over my head" build thread
Damn that looks good!!!
__________________
1970 1/2 ton 4x4 4spd Suburban 1972 K10 350/700R/205/ Sniper EFI Daily Driver Sold 1971 K5 on 35s Traded 1972 K5 3/4 ton PROJECT Sold |
05-30-2018, 04:31 PM | #165 |
Registered User
Join Date: Mar 2007
Location: Oakland, Ca
Posts: 1,382
|
Re: The "In over my head" build thread
Took a little longer than expected but...here she is!
|
05-30-2018, 04:38 PM | #166 |
Senior Member
Join Date: Jun 2002
Location: Murray, Kentucky
Posts: 3,568
|
Re: The "In over my head" build thread
That's gotta be a great feeling!
Nice work, Rg
__________________
Roger '68 Short step - https://67-72chevytrucks.com/vboard/...d.php?t=849675 '69 ('70?) 2wd Blazer '70 GMC Jimmy 2wd '73 Firebird - https://67-72chevytrucks.com/vboard/...d.php?t=853203 |
05-30-2018, 07:23 PM | #167 |
Registered User
Join Date: Oct 2007
Location: Spanaway
Posts: 8,451
|
Re: The "In over my head" build thread
Sweet!
__________________
Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's |
05-30-2018, 07:44 PM | #168 |
Account Suspended
Join Date: Jun 2015
Location: No longer here
Posts: 1,000
|
Re: The "In over my head" build thread
Nice truck, I have three blazers 2 4x4's and one 2wd....the 2wd is going to be painted red and white like a c10....love the red.... enjoy !!!!!!
|
05-30-2018, 09:24 PM | #169 |
Registered User
Join Date: Dec 2017
Location: Escondido
Posts: 305
|
Re: The "In over my head" build thread
Very nice-congrats!!!
__________________
-Bruce 1971 K5 Blazer 4WD |
05-30-2018, 10:56 PM | #170 |
Registered User
Join Date: Jan 2018
Location: Waterloo,Nebraska
Posts: 309
|
Re: The "In over my head" build thread
Wow
|
06-01-2018, 07:58 AM | #171 |
Registered User
Join Date: Jan 2007
Location: Columbus, Ohio
Posts: 4,346
|
Re: The "In over my head" build thread
looks great! 8 years to finish is way better than not finishing at all... Congrats.
|
07-26-2018, 01:20 PM | #172 |
Registered User
Join Date: Mar 2007
Location: Oakland, Ca
Posts: 1,382
|
Re: The "In over my head" build thread
Can a mod please move this to the builds section?
|
07-29-2018, 08:59 PM | #173 |
Junior Member
Join Date: Aug 2010
Location: Sunnyvale, CA
Posts: 66
|
Re: The "In over my head" build thread
I'd love to get the contact info of the shop in the bay area...Looks amazing
|
07-29-2018, 09:18 PM | #174 |
Registered User
Join Date: Mar 2007
Location: Oakland, Ca
Posts: 1,382
|
Re: The "In over my head" build thread
Talk to Manuel at BFS
https://www.bodyandframespecialists.com/ They also did Mike's dark olive K5 that looks flawless. |
07-29-2018, 10:06 PM | #175 |
Registered User
Join Date: Mar 2007
Location: Oakland, Ca
Posts: 1,382
|
Re: The "In over my head" build thread
can't argue with their quality
|
Bookmarks |
|
|