KS Parting a original 71 chevy C10 now - Page 7 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 03-07-2015, 08:29 PM

The set of spark plug wire holders is $28 shipped, I'll get quote on overloads tomorrow, Thanks Randy

doo142 · 03-07-2015, 11:40 PM

Couple other things Randy, the glove box door if nice, in post 94 pic 4 the door jamb vent, no rush just lmk, thanks

72K20super · 03-08-2015, 12:48 AM

I would be interested in the mirrors and brackets if you still have them

teeitup · 03-08-2015, 10:31 AM

doo142, glove box door is $10, $5 for the vent, $10 for the 69 outer bumper brackets, Plus shipping. I'd hate to ship with the chrome, so it would be 2 boxes. I got to box parts today so I will get quotes too

72K20super, $30 plus shipping on them

Thanks Randy

teeitup · 03-08-2015, 11:29 AM

gs1969, Gary, sent you a pm about a cab, Thanks Randy

doo142 · 03-08-2015, 11:59 AM

Quote:

Originally Posted by teeitup

doo142, glove box door is $10, $5 for the vent, $10 for the 69 outer bumper brackets, Plus shipping. I'd hate to ship with the chrome, so it would be 2 boxes. I got to box parts today so I will get quotes too

72K20super, $30 plus shipping on them

Thanks Randy

I'll do all of the parts listed, pack and ship as you see fit, thanks again

Jake1971 · 03-08-2015, 01:02 PM

Quote:

Originally Posted by RedRoad

How much for shipping on the overloads to 91011? Also interested in all the spark plug wire holders and related components.

Thanks

Hey Randy, I will take the rear overload springs setup if it gets to me. Add them to pile and LMK total to 78602.
Also still looking for these parts for my '71 c10:
Center seat belt (blue),
Blue steel door panels,
Blue (522?) carpet, low hump,
Black rubber mat, low hump,
Passenger front outer fender,
Bedside gas doors from the ochre truck.
Thanks again!

Mr.chivo · 03-08-2015, 02:20 PM

Payment sent for armrests and visors with clips, thanks!

72K20super · 03-08-2015, 05:06 PM

I will take the mirrors let me know how much shipping is to 80305 and do you still have the air cleaner spacer is so I will take that as well.

teeitup · 03-08-2015, 08:45 PM

doo142, finally got quotes for you. I'll send pm

Paul, I have the one door panel, pair of horns and the gas doors is all. Quote tomorrow night. I ran out of time today, had a accident with the backhoe and had the fix the door on it, very bad deal. My boss is not going to be happy in the morning

Mr Chivo, I'll get them shipped out this week

72K20Super, $45 plus shipping, I'll get you a quote

Thanks Randy

doo142 · 03-08-2015, 09:54 PM

Quote:

Originally Posted by teeitup

doo142, finally got quotes for you. I'll send pm

Paul, I have the one door panel, pair of horns and the gas doors is all. Quote tomorrow night. I ran out of time today, had a accident with the backhoe and had the fix the door on it, very bad deal. My boss is not going to be happy in the morning

Mr Chivo, I'll get them shipped out this week

72K20Super, $45 plus shipping, I'll get you a quote

Thanks Randy

Pm answered $ sent, thanks Randy!!

gs1969 · 03-08-2015, 10:28 PM

Randy,
I sent you a PM.

Thanks Gary

**med.bronze** · 03-08-2015, 11:25 PM

Randy- i'd be interested in the jack tools bag in post #140 if its still available. Shipping is to 59044. Thanks- Ryan

teeitup · 03-09-2015, 07:49 AM

doo142, I'll get shipped out this week

Gary, I will let you know when they come in

Ryan, it has as couple small tears in it. I can get some pics tonight. $18 shipped

Thanks Randy

w00dst0ck · 03-09-2015, 11:00 AM

I'm in need of the spring that goes below the lower steering shaft bearing, above the intermediate shaft.

**med.bronze** · 03-09-2015, 12:16 PM

Randy- I'd also take the metal vacuum advance line in the last pic from post #1 if its still available. If so whats the new total with the jack tools bag to 59044? Thanks-Ryan

w00dst0ck · 03-09-2015, 12:21 PM

Need this clamp that puts pressure on the lower steering shaft bearing. Do you have one?

72K20super · 03-10-2015, 03:04 AM

I was wondering if you still have the moldings around the front and rear windows and would ship if you do. Also is that grill in the picture laying on the ground sold. Thanks Jeremy

72K20super · 03-10-2015, 03:17 AM

forgot to ask if the lower side moldings and bed front are still available, looked and did not see where they were spoken for. thanks

teeitup · 03-10-2015, 07:51 AM

Woodstock, I'll look on those, it will be Wed night before I have time

Ryan, another $5 for it, Pics tonight, I ran out of time last night boxing parting

Jeremy, sorry I don't ship the window chrome or grills. All the lower chrome has been sold, only have upper cab forward left

Thanks Randy

72K20super · 03-10-2015, 11:59 AM

How much for that grill and moldings, I have a friend that lives back there and comes this way a couple times a year I will have him grab them. Or how much for the windows with moldings since we are not shipping them. Thanks

72K20super · 03-10-2015, 12:00 PM

sorry meant window chrome

teeitup · 03-10-2015, 01:02 PM

Inner grill is $30, it has some cracks in it and few chips out of but would be good for a driver. Windshield chrome and rear window chrome $60. Thanks Randy

72K20super · 03-10-2015, 01:56 PM

Is the complete 72 grill shell and insert in front of the yellow fenders a few pictures down from 24 available. Also I got your payment for the mirrors and air cleaner spacer to you is morning.

Jake1971 · 03-10-2015, 05:12 PM

Quote:

Originally Posted by teeitup

Paul, I have the one door panel, pair of horns and the gas doors is all. Quote tomorrow night. I ran out of time today, had a accident with the backhoe and had the fix the door on it, very bad deal. My boss is not going to be happy in the morning
Thanks Randy

Hey Randy, more importantly, are you alright? Take your time, LMK when to hit the PayPal button.

03-07-2015, 08:29 PM	#151
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a original 71 chevy C10 now The set of spark plug wire holders is $28 shipped, I'll get quote on overloads tomorrow, Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-07-2015, 11:40 PM	#152
doo142 Registered User Join Date: Jan 2013 Location: Bristol,In. Posts: 1,115	Re: Parting a original 71 chevy C10 now Couple other things Randy, the glove box door if nice, in post 94 pic 4 the door jamb vent, no rush just lmk, thanks

03-08-2015, 12:48 AM	#153
72K20super Registered User Join Date: Feb 2013 Location: Fort Collins, CO Posts: 26	Re: Parting a original 71 chevy C10 now I would be interested in the mirrors and brackets if you still have them

03-08-2015, 10:31 AM	#154
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a original 71 chevy C10 now doo142, glove box door is $10, $5 for the vent, $10 for the 69 outer bumper brackets, Plus shipping. I'd hate to ship with the chrome, so it would be 2 boxes. I got to box parts today so I will get quotes too 72K20super, $30 plus shipping on them Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-08-2015, 11:29 AM	#155
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a original 71 chevy C10 now gs1969, Gary, sent you a pm about a cab, Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-08-2015, 02:20 PM	#158
Mr.chivo Registered User Join Date: Feb 2014 Location: Chular California Posts: 165	Re: Parting a original 71 chevy C10 now Payment sent for armrests and visors with clips, thanks!

03-08-2015, 05:06 PM	#159
72K20super Registered User Join Date: Feb 2013 Location: Fort Collins, CO Posts: 26	Re: Parting a original 71 chevy C10 now I will take the mirrors let me know how much shipping is to 80305 and do you still have the air cleaner spacer is so I will take that as well.

03-08-2015, 08:45 PM	#160
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a original 71 chevy C10 now doo142, finally got quotes for you. I'll send pm Paul, I have the one door panel, pair of horns and the gas doors is all. Quote tomorrow night. I ran out of time today, had a accident with the backhoe and had the fix the door on it, very bad deal. My boss is not going to be happy in the morning Mr Chivo, I'll get them shipped out this week 72K20Super, $45 plus shipping, I'll get you a quote Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-08-2015, 10:28 PM	#162
gs1969 Registered User Join Date: Jun 2007 Location: Leavenworth Posts: 72	Re: Parting a original 71 chevy C10 now Randy, I sent you a PM. Thanks Gary

03-08-2015, 11:25 PM	#163
med.bronze Senior Member Join Date: Dec 2011 Location: Laurel, Mt. Posts: 522	Re: Parting a original 71 chevy C10 now Randy- i'd be interested in the jack tools bag in post #140 if its still available. Shipping is to 59044. Thanks- Ryan __________________ 1972 Cheyenne Super 10 SWB,bucket seats,dealer cruise,tilt,tac,a/c,shoulder belts, 350/350 1971 K-10 Custom Deluxe 1971 K-10 Custom

03-09-2015, 07:49 AM	#164
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a original 71 chevy C10 now doo142, I'll get shipped out this week Gary, I will let you know when they come in Ryan, it has as couple small tears in it. I can get some pics tonight. $18 shipped Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-09-2015, 11:00 AM	#165
w00dst0ck Registered User Join Date: Jul 2013 Location: Austin, Texas Posts: 349	Re: Parting a original 71 chevy C10 now I'm in need of the spring that goes below the lower steering shaft bearing, above the intermediate shaft.

03-09-2015, 12:16 PM	#166
med.bronze Senior Member Join Date: Dec 2011 Location: Laurel, Mt. Posts: 522	Re: Parting a original 71 chevy C10 now Randy- I'd also take the metal vacuum advance line in the last pic from post #1 if its still available. If so whats the new total with the jack tools bag to 59044? Thanks-Ryan __________________ 1972 Cheyenne Super 10 SWB,bucket seats,dealer cruise,tilt,tac,a/c,shoulder belts, 350/350 1971 K-10 Custom Deluxe 1971 K-10 Custom

03-09-2015, 12:21 PM	#167
w00dst0ck Registered User Join Date: Jul 2013 Location: Austin, Texas Posts: 349	Re: Parting a original 71 chevy C10 now Need this clamp that puts pressure on the lower steering shaft bearing. Do you have one?

03-10-2015, 03:04 AM	#168
72K20super Registered User Join Date: Feb 2013 Location: Fort Collins, CO Posts: 26	Re: Parting a original 71 chevy C10 now I was wondering if you still have the moldings around the front and rear windows and would ship if you do. Also is that grill in the picture laying on the ground sold. Thanks Jeremy



Register or Log In To remove these advertisements.

03-10-2015, 03:17 AM	#169
72K20super Registered User Join Date: Feb 2013 Location: Fort Collins, CO Posts: 26	Re: Parting a original 71 chevy C10 now forgot to ask if the lower side moldings and bed front are still available, looked and did not see where they were spoken for. thanks

03-10-2015, 07:51 AM	#170
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a original 71 chevy C10 now Woodstock, I'll look on those, it will be Wed night before I have time Ryan, another $5 for it, Pics tonight, I ran out of time last night boxing parting Jeremy, sorry I don't ship the window chrome or grills. All the lower chrome has been sold, only have upper cab forward left Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 03-10-2015 at 08:15 AM.

03-10-2015, 11:59 AM	#171
72K20super Registered User Join Date: Feb 2013 Location: Fort Collins, CO Posts: 26	Re: Parting a original 71 chevy C10 now How much for that grill and moldings, I have a friend that lives back there and comes this way a couple times a year I will have him grab them. Or how much for the windows with moldings since we are not shipping them. Thanks

03-10-2015, 12:00 PM	#172
72K20super Registered User Join Date: Feb 2013 Location: Fort Collins, CO Posts: 26	Re: Parting a original 71 chevy C10 now sorry meant window chrome

03-10-2015, 01:02 PM	#173
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a original 71 chevy C10 now Inner grill is $30, it has some cracks in it and few chips out of but would be good for a driver. Windshield chrome and rear window chrome $60. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-10-2015, 01:56 PM	#174
72K20super Registered User Join Date: Feb 2013 Location: Fort Collins, CO Posts: 26	Re: Parting a original 71 chevy C10 now Is the complete 72 grill shell and insert in front of the yellow fenders a few pictures down from 24 available. Also I got your payment for the mirrors and air cleaner spacer to you is morning.

Register or Log In To remove these advertisements.