Boyd Welding-67-72 Rear Mount Aluminum Tank - Page 7 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Daveboyd** · 05-19-2010, 11:13 AM

Quote:

Originally Posted by GCncsuHD

Dave, what would be the price on a EFI setup tank now? I hate I missed the group buy. Also what is the expected build time on this, just a ballpark figure at the longest? I'm trying to get my 67 running/driving in time for my wedding in September. Also mine is a coil, swb, so I may need the same angled modification as BossHogg.

Thanks,
Garrett

you have a pm

**Daveboyd** · 05-19-2010, 04:54 PM

Even though the group buy is over i wanted to make sure everyone could get a little discount. From now on if you have a Valid membership with this forum you get 10 % off any of our products and parts forever unless we are running a group buy.

THANK YOU FOR YOUR SUPPORT. Spread the word.

make sure you let me know your sn when you order. questions? Email me Directly daveboyd@boydwelding.com

6D8_C10 · 05-24-2010, 04:09 PM

Quote:

Originally Posted by GCncsuHD

Dave, what would be the price on a EFI setup tank now? I hate I missed the group buy. Also what is the expected build time on this, just a ballpark figure at the longest? I'm trying to get my 67 running/driving in time for my wedding in September. Also mine is a coil, swb, so I may need the same angled modification as BossHogg.

Thanks,
Garrett

Hey Dave, can you PM me too?
I too have a SWB with coils. Its a 71 frame.

Thanks

BossHogg69 · 05-26-2010, 11:28 PM

Dave - just got in from work today, tank came it last week. Looks good. I'll be calling you per your PM to get you paid for the extra mods. Thank you again for your dedication to working the kinks out on this deal. I will post pics when I get the tank installed tomorrow.

**Hart_Rod** · 06-01-2010, 10:57 AM

Any pictures of an EFI tank installed?

chris6499 · 06-12-2010, 01:29 AM

what is the price on the efi tank with sender and are you going to do another group by i will be ready in the next few weeks. also do you know if this tank will fit a 64 short bed

bgood70 · 06-14-2010, 02:06 PM

David

I missed group buy also but am interested in a tank for my 70 Chevy. I also have the angled frame. Sent PM but I will also email you directly as noted in this thread. Tanks look great.

**Daveboyd** · 06-14-2010, 02:37 PM

Hey everyone. Below is the new design for the standard and EFI tank. From now on all tanks will look like these and should fit your unmodified frames.

STANDARD NON EFI

EFI

Don't Forget to tell me your Forum name when you order so you can get your 10% discount.

6D8_C10 · 06-14-2010, 06:23 PM

Quote:

Originally Posted by Daveboyd

Hey everyone. Below is the new design for the standard and EFI tank. From now on all tanks will look like these and should fit your unmodified frames.

STANDARD NON EFI

EFI

Don't Forget to tell me your Forum name when you order so you can get your 10% discount.

Tanks Dave, I will be ordering mine soon.

chris6499 · 06-15-2010, 10:13 PM

what is the estimated time for an efi tank

**Daveboyd** · 06-25-2010, 01:32 PM

Quote:

Originally Posted by chris6499

what is the estimated time for an efi tank

Wow sorry man i just saw this post.. we are running at 7-10 business days but it seems that EFI tanks take longer for whatever reason. so i would say 2-4 weeks.

give me a call anytime if you have questions.

**Daveboyd** · 06-30-2010, 10:00 AM

Also if i understand correctly this new modified tank may fit the 63-72 tank.

70-Chevy · 07-11-2010, 12:53 AM

I'll be contacting you here shortly Dave about your modified tank. Looks sweet!

70-Chevy · 07-21-2010, 08:31 AM

Dave,
With a steel bed floor, what does the height of the filer neck put it at in comparison with the bed floor?

I'm just trying to think about what I need to do with the bed in order to make this work.

Please let me know as soon as you can as Im trying to make a decision on this.

Thanks,
Chris

Flame Broiled · 07-24-2010, 12:16 PM

I am wondering the same question, and is there a reason the filler neck is offset to one side instead of the middle?? It looks like a killer tank, I will be placing an order soon. Good Work

**Daveboyd** · 07-26-2010, 09:48 AM

Quote:

Originally Posted by Flame Broiled

I am wondering the same question, and is there a reason the filler neck is offset to one side instead of the middle?? It looks like a killer tank, I will be placing an order soon. Good Work

The only reason the fill neck is offset to the driver side is so that we can use the same layout for either a 90Deg side filler or for a bed filler.

I will be more than happy to move the filler to whatever location you choose.

dave

**Daveboyd** · 08-13-2010, 10:56 AM

We have been hard at work building a new site and preparing to move our shop to a much bigger facility.

check out our updated site. www.boydwelding.com

post up pics of our tank in your vehicle, you might make it on the site.

here is a sneak peak of the new shop.

MOVE DATE IS LABOR DAY WEEKEND SEPT 3 - 6

I SMELL A GROUP BUY COOKING UP FOR FALL.

**Daveboyd** · 07-26-2010, 09:47 AM

Quote:

Originally Posted by 70-Chevy

Dave,
With a steel bed floor, what does the height of the filer neck put it at in comparison with the bed floor?

I'm just trying to think about what I need to do with the bed in order to make this work.

Please let me know as soon as you can as Im trying to make a decision on this.

Thanks,
Chris

Chris,

I wish i had the answers for you but I really don't know as i have never personally installed one. From what other customers have told me the fill cap falls right under the bed floor and its as simple as cutting a hole in the bed directly above the filler cap.

dave

Nova70 · 08-13-2010, 02:33 PM

I'm looking to place an order on this tank as soon as money allows. Awesome work. Anyone done a side fill with this tank? I want to do a bedside filler but haven't seen anyone do one yet. I'm thinking of just getting one of the Chrome covers from AutoZone and using it as my side door.

AJs72K5 · 08-13-2010, 07:39 PM

Group buy! Group buy! Group buy!

SWB4x4 · 08-14-2010, 02:49 PM

GB GB GB!!!

I will be needing a rear mount side fill efi tank soon!

smokinstang70 · 08-14-2010, 03:38 PM

I second that... will be looking to purchase an EFI tank in the near future.

99-2door · 08-14-2010, 07:41 PM

Just wanted to say:
I have had my EFI tank in for a few weeks now. Install went great. I did have to do a little grinding on the frame to make it fit, but I believe Dave has since modified the design to accommodate the SWB coil spring frame.
Truck isn't done, but the LT1 is running now using this tank.
I got the bed floor mount filler and I am using a chrome filler designed for a boat. The filler is placed perfectly between the 2 bed supports. Pretty simple on that part. The one problem this did create is that in order to remove/install 2 of the bed bolts I will have to drop the tank to get access to them. Not a problem since I ran my electrical and fuel lines in a way that makes dropping the tank easy.
Tank is a really nice piece, looks great and works great.

purewhitemp5 · 08-18-2010, 07:58 PM

subscribed for an amazing tank and looking forward for the next group buy!!

Heater63 · 08-19-2010, 03:25 PM

Dave, we know your busy moving, but it looks like the're is another batch interested in a group buy again. Will you do this again?

05-19-2010, 04:54 PM	#2
Daveboyd Senior Member Join Date: Sep 2009 Location: ocala, fl Posts: 270	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Even though the group buy is over i wanted to make sure everyone could get a little discount. From now on if you have a Valid membership with this forum you get 10 % off any of our products and parts forever unless we are running a group buy. THANK YOU FOR YOUR SUPPORT. Spread the word. make sure you let me know your sn when you order. questions? Email me Directly daveboyd@boydwelding.com __________________ Dave Boyd View Our 63-72 C10 Tank options https://fueltankparts.com/collections/63-72-c10-tanks Boyd Welding Main Site : http://www.boydwelding.com/ Boyd Online Shop: https://fueltankparts.com/ E: Sales@boydwelding.com

05-26-2010, 11:28 PM	#4
BossHogg69 motor exploder Join Date: Mar 2009 Location: Pittsburgh, PA Posts: 2,346	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Dave - just got in from work today, tank came it last week. Looks good. I'll be calling you per your PM to get you paid for the extra mods. Thank you again for your dedication to working the kinks out on this deal. I will post pics when I get the tank installed tomorrow. __________________ Adam 1969 Chevy CST/10 stepside, DART Big M/TREMEC Magnum Extreme/3.73's w/Detroit Truetrac 1965 Chevy Bel Air Wagon (daily driver), 327/TH350,10 bolt w/3.08's 1961 Chevy Bel Air Sport Coupe, ZZ454/M21/9" rear w/3.50's & Detroit Truetrac 2005 GMC 1500 ccsb 2wd, 6.0L/4L65e/3.73 G80 2006 GMC 2500HD ccsb 4x4, DMax LBZ/Allison 6spd/4.56's w/Detroit TrueTrac Use the SEARCH function on this forum - it is your friend!!

06-01-2010, 10:57 AM	#5
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,837	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Any pictures of an EFI tank installed? __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

06-12-2010, 01:29 AM	#6
chris6499 Registered User Join Date: Mar 2009 Location: mesa,az Posts: 58	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank what is the price on the efi tank with sender and are you going to do another group by i will be ready in the next few weeks. also do you know if this tank will fit a 64 short bed

06-14-2010, 02:06 PM	#7
bgood70 Registered User Join Date: Feb 2009 Location: Jacksonville Fl Posts: 180	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank David I missed group buy also but am interested in a tank for my 70 Chevy. I also have the angled frame. Sent PM but I will also email you directly as noted in this thread. Tanks look great. __________________ 70 C-10 SWB 350/700r4 Good 70 SWB Build 72 GMC Sprint SP Custom 350/Turbo300

06-14-2010, 02:37 PM	#8
Daveboyd Senior Member Join Date: Sep 2009 Location: ocala, fl Posts: 270	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Hey everyone. Below is the new design for the standard and EFI tank. From now on all tanks will look like these and should fit your unmodified frames. STANDARD NON EFI EFI Don't Forget to tell me your Forum name when you order so you can get your 10% discount. __________________ Dave Boyd View Our 63-72 C10 Tank options https://fueltankparts.com/collections/63-72-c10-tanks Boyd Welding Main Site : http://www.boydwelding.com/ Boyd Online Shop: https://fueltankparts.com/ E: Sales@boydwelding.com

06-15-2010, 10:13 PM	#10
chris6499 Registered User Join Date: Mar 2009 Location: mesa,az Posts: 58	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank what is the estimated time for an efi tank

06-30-2010, 10:00 AM	#12
Daveboyd Senior Member Join Date: Sep 2009 Location: ocala, fl Posts: 270	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Also if i understand correctly this new modified tank may fit the 63-72 tank. __________________ Dave Boyd View Our 63-72 C10 Tank options https://fueltankparts.com/collections/63-72-c10-tanks Boyd Welding Main Site : http://www.boydwelding.com/ Boyd Online Shop: https://fueltankparts.com/ E: Sales@boydwelding.com

07-11-2010, 12:53 AM	#13
70-Chevy -Chris Join Date: Sep 2002 Location: Moyock, NC Posts: 622	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank I'll be contacting you here shortly Dave about your modified tank. Looks sweet!

07-21-2010, 08:31 AM	#14
70-Chevy -Chris Join Date: Sep 2002 Location: Moyock, NC Posts: 622	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Dave, With a steel bed floor, what does the height of the filer neck put it at in comparison with the bed floor? I'm just trying to think about what I need to do with the bed in order to make this work. Please let me know as soon as you can as Im trying to make a decision on this. Thanks, Chris

07-24-2010, 12:16 PM	#15
Flame Broiled Registered User Join Date: Jul 2010 Location: Delta BC Posts: 68	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank I am wondering the same question, and is there a reason the filler neck is offset to one side instead of the middle?? It looks like a killer tank, I will be placing an order soon. Good Work

08-13-2010, 10:56 AM	#17
Daveboyd Senior Member Join Date: Sep 2009 Location: ocala, fl Posts: 270	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank We have been hard at work building a new site and preparing to move our shop to a much bigger facility. check out our updated site. www.boydwelding.com post up pics of our tank in your vehicle, you might make it on the site. here is a sneak peak of the new shop. MOVE DATE IS LABOR DAY WEEKEND SEPT 3 - 6 I SMELL A GROUP BUY COOKING UP FOR FALL. __________________ Dave Boyd View Our 63-72 C10 Tank options https://fueltankparts.com/collections/63-72-c10-tanks Boyd Welding Main Site : http://www.boydwelding.com/ Boyd Online Shop: https://fueltankparts.com/ E: Sales@boydwelding.com Last edited by Daveboyd; 08-25-2010 at 12:33 AM. Reason: MOVE DATE UPDATE

08-13-2010, 02:33 PM	#19
Nova70 Registered User Join Date: Jun 2009 Location: Dub VC Utah Posts: 364	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank I'm looking to place an order on this tank as soon as money allows. Awesome work. Anyone done a side fill with this tank? I want to do a bedside filler but haven't seen anyone do one yet. I'm thinking of just getting one of the Chrome covers from AutoZone and using it as my side door. __________________ '70 K10-- 4" lift on 35"s-- For Sale http://www.ksl.com/index.php?sid=733...iew&ad=4578305

08-13-2010, 07:39 PM	#20
AJs72K5 Registered User Join Date: Nov 2007 Location: South Tx Posts: 1,083	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Group buy! Group buy! Group buy! __________________ - AJ Gray Matter Build - 1972 K5 with some stuff

08-14-2010, 02:49 PM	#21
SWB4x4 Registered User Join Date: Jan 2010 Location: Nor*Cal CALIFORNIA Posts: 157	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank GB GB GB!!! I will be needing a rear mount side fill efi tank soon! __________________ J.T. 1972 SWB 4X4 on 35"s with 6" lift all around 3/4 ton running gear with high steer and 4.88s 350/th350. SOON TO BE DONE:2" higher in front 37"s,LSX Swap,Hugger Orange & White Paint Scheme,Air Conditioning,Power Windows & Locks,Complete Gauge Kit,Tank Relocation,Double Din Nav with full Audio System. My Build Thread http://67-72chevytrucks.com/vboard/s...=1#post4169140



Register or Log In To remove these advertisements.

08-14-2010, 03:38 PM	#22
smokinstang70 Registered User Join Date: Feb 2009 Location: Savannah GA Posts: 505	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank I second that... will be looking to purchase an EFI tank in the near future.

08-14-2010, 07:41 PM	#23
99-2door Registered User Join Date: Oct 2003 Location: Broken Bow, OK Posts: 1,385	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Just wanted to say: I have had my EFI tank in for a few weeks now. Install went great. I did have to do a little grinding on the frame to make it fit, but I believe Dave has since modified the design to accommodate the SWB coil spring frame. Truck isn't done, but the LT1 is running now using this tank. I got the bed floor mount filler and I am using a chrome filler designed for a boat. The filler is placed perfectly between the 2 bed supports. Pretty simple on that part. The one problem this did create is that in order to remove/install 2 of the bed bolts I will have to drop the tank to get access to them. Not a problem since I ran my electrical and fuel lines in a way that makes dropping the tank easy. Tank is a really nice piece, looks great and works great. __________________ 95 K3500 SRW 5.7L Vortec 4L80e 4.10 G80 2001 GMC C3 6.0 AWD, Volant, 3/5 drop TBSS intake, HP tuners, pullies, 05 efans, 05 front brakes, etc. 2003 Tahoe Z71 Silverado front clip

08-18-2010, 07:58 PM	#24
purewhitemp5 Registered User Join Date: Jun 2009 Location: Bear Delaware Posts: 72	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank subscribed for an amazing tank and looking forward for the next group buy!!

08-19-2010, 03:25 PM	#25
Heater63 Registered User Join Date: Dec 2007 Location: N Texas Posts: 580	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Dave, we know your busy moving, but it looks like the're is another batch interested in a group buy again. Will you do this again? __________________ 292 + TKO500

Register or Log In To remove these advertisements.