KS Parting 67 GMC CST V6 - Page 7 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dirtyjim · 10-20-2013, 10:42 AM

$35 + shipping sounds good. let me know the total and i'll paypal you the money.
thanks jimmy

**jmader** · 10-20-2013, 11:33 AM

Do you still have the custom badges or did I miss it?

trukman1 · 10-20-2013, 05:25 PM

I'm interested in seat belts if they are available. Prices and pics?

I assume they are blue. I also would like to see the mounts as well.

Thank you.

**Cash3481** · 10-20-2013, 08:09 PM

Quote:

Originally Posted by nobolt

thanks Mike,
i'd be very interested in a set of mirrors. maybe both.

I'll get you pics of both tomorrow.

Quote:

Originally Posted by dirtyjim

$35 + shipping sounds good. let me know the total and i'll paypal you the money.
thanks jimmy

I'll get you a quote tomorrow.

Quote:

Originally Posted by jmader

Do you still have the custom badges or did I miss it?

I do have them... Pics tomorrow. I think there is some pics wary in this thread.

Quote:

Originally Posted by trukman1

I'm interested in seat belts if they are available. Prices and pics?

I assume they are blue. I also would like to see the mounts as well.

Thank you.

I'll get pics for it tomorrow.

**Cash3481** · 10-21-2013, 10:10 AM

Pics of the custom badges and outer heater housing!
Housing is dirty but will clean up well. there is no broken tabs or marks. YET...lol
I need to get the Mirrors from storage this afternoon.

gdavis · 10-21-2013, 06:05 PM

do you happen to have a mirrow support bracket. the one that fits inside the door from 1967 thru 69

**Cash3481** · 10-21-2013, 11:01 PM

Quote:

Originally Posted by gdavis

do you happen to have a mirrow support bracket. the one that fits inside the door from 1967 thru 69

GDavis:
I have several backing plates out there but need to see which ones are correct for your application. I just threw them in a bag and they went into a tub. Ill try to get a pic in the morning. I just got a new government contract job and may be busy hiring the new employees this week. Ill do my best to get you a pic and get it posted.
Mike

kaphillips · 10-22-2013, 08:10 AM

I cant see where anyone has asked bout that under dash mount 8 track player. It appears to be era correct but not correct for our truck dealer installed item. Is it for sale? I might be interested pending pics, price, and model number. It does appear to be a GM make though. Thanks Mike

kaphillips · 10-22-2013, 08:16 AM

Sorry, after a review of a close up of the 8 track player it is an aftermarket not a GM make, I am no longer interested. Thanks

**jabborabbo** · 10-22-2013, 09:17 AM

Regarding the fiberglass topper...would you by chance happen to be planning a trip south or southeast anytime in the near future?

Thanks,

Jerry

Justintime67 · 10-22-2013, 04:16 PM

Quote:

Originally Posted by Cash3481

GDavis:
I have several backing plates out there but need to see which ones are correct for your application. I just threw them in a bag and they went into a tub. Ill try to get a pic in the morning. I just got a new government contract job and may be busy hiring the new employees this week. Ill do my best to get you a pic and get it posted.
Mike

I'd be interested in a pair of backing plates too if you got more than one set.

doubleRdazz · 10-22-2013, 06:38 PM

What shape is the front bumper in? A little hard to tell from the pics.

How much for it shipped to 08854?

Thanks

**Cash3481** · 10-22-2013, 10:46 PM

Quote:

Originally Posted by jabborabbo

Regarding the fiberglass topper...would you by chance happen to be planning a trip south or southeast anytime in the near future?

Thanks,

Jerry

Jerry,
Sorry no trips planned right now but I can hold it for you for a reasonable time.

Quote:

Originally Posted by Justintime67

I'd be interested in a pair of backing plates too if you got more than one set.

Justin,
I'll pull them out and get a picture yet. I am getting hired for a new job this week and am a little distracted with this new distracting job! Lol

Quote:

Originally Posted by doubleRdazz

What shape is the front bumper in? A little hard to tell from the pics.

How much for it shipped to 08854?

Thanks

DoubleR,
This Bumper is sold sorry!

Mike

dirtyjim · 10-23-2013, 08:15 PM

the heater box looks good. let me know if I need to pm you my full address for the shipping quote.

bgwss · 12-25-2013, 11:43 AM

Is that a 305 or 351, I would be interested in the exhaust manifold.

carbuff382 · 12-25-2013, 12:33 PM

Is the top piece on the grill available?(filler bar)
Thanks

**67carry-all** · 12-25-2013, 01:21 PM

Hi Mike - I'm interested in the chrome door panel retainer strips if in good shape and also the defroster vents if blue and unbroken.
Thanks, Ben

**Cash3481** · 12-26-2013, 12:44 AM

Quote:

Originally Posted by dirtyjim

the heater box looks good. let me know if I need to pm you my full address for the shipping quote.

If your still intereted let me know.

Quote:

Originally Posted by bgwss

Is that a 305 or 351, I would be interested in the exhaust manifold.

305

Quote:

Originally Posted by carbuff382

Is the top piece on the grill available?(filler bar)
Thanks

I still have it but may sell it for the right price.
Let me see what they are selling for.

Quote:

Originally Posted by 67carry-all

Hi Mike - I'm interested in the chrome door panel retainer strips if in good shape and also the defroster vents if blue and unbroken.
Thanks, Ben

I'll look at the strips tomorrow and get a pic if they look good.

Mike

**burb71** · 12-26-2013, 06:49 PM

Is the stainless trim on the rear window still there and in good condition?
If so how much$

cxune · 12-26-2013, 07:26 PM

Any chance you've got a clutch return helper spring in all your stuff that would work on a Saginaw? Mine broke today. :P

**Cash3481** · 12-27-2013, 12:10 AM

Quote:

Originally Posted by burb71

Is the stainless trim on the rear window still there and in good condition?
If so how much$

Sorry it sold already with the cab.

Quote:

Originally Posted by cxune

Any chance you've got a clutch return helper spring in all your stuff that would work on a Saginaw? Mine broke today. :P

I have one on this v-6 out there. I've been doing family time all week so I've been slow to respond to everyone. I also have a lot of manual linkage I need to sell. I'll post a picture of what I have tomorrow and if your in need of it right now, I'll send it out to you.

Mike

cxune · 12-27-2013, 12:16 AM

Sounds great- how much on the spring with shipping to 77375? And can you PM me your paypal?

Thanks!

powell72 · 12-27-2013, 02:15 PM

Are the escutcheons for the door handles and window cranks available? Also interested in the passenger window crank. I may also be interested in the arm rests.

**Cash3481** · 12-27-2013, 05:20 PM

Quote:

Originally Posted by cxune

Sounds great- how much on the spring with shipping to 77375? And can you PM me your paypal?

Thanks!

Let me make sure which spring it is you need. How is $10 shipped for the spring?

Quote:

Originally Posted by powell72

Are the escutcheons for the door handles and window cranks available? Also interested in the passenger window crank. I may also be interested in the arm rests.

I have all the cranks and handles from this truck. Ill post pics when I get home.
Mike

**Cash3481** · 12-27-2013, 08:48 PM

Quote:

Originally Posted by carbuff382

Is the top piece on the grill available?(filler bar)
Thanks

Pics below

Quote:

Originally Posted by 67carry-all

Hi Mike - I'm interested in the chrome door panel retainer strips if in good shape and also the defroster vents if blue and unbroken.
Thanks, Ben

I couldn't find them out there but ill keep looking tomorrow

Quote:

Originally Posted by cxune

Any chance you've got a clutch return helper spring in all your stuff that would work on a Saginaw? Mine broke today. :P

Pic below!

10-20-2013, 10:42 AM	#151
dirtyjim Registered User Join Date: Feb 2013 Location: alvin, texas Posts: 622	Re: Parting 67 GMC CST V6 $35 + shipping sounds good. let me know the total and i'll paypal you the money. thanks jimmy __________________ 1967 C10 lwb two tone, 305 & rat fink style floor shifted 700r4, 20" steelies 2004 2500HD utility bed aka Brutus

10-20-2013, 11:33 AM	#152
jmader Senior Member Join Date: Aug 2013 Location: Grand Island, NE Posts: 1,483	Re: Parting 67 GMC CST V6 Do you still have the custom badges or did I miss it? __________________ 1949 Chevy 3100 Five Window 1964 Chevy C10 Lambrecht Auction project 1967 Chevy SWB K10 1967 GMC K15 Project Build thread- http://67-72chevytrucks.com/vboard/s...72#post6502772 1968 Chevy Anniversary K10 1991 K5 4" Lift 35's (the wife's toy)

10-20-2013, 05:25 PM	#153
trukman1 Registered User Join Date: Apr 2001 Location: Beavercreek, Ohio 45431 Posts: 737	Re: Parting 67 GMC CST V6 I'm interested in seat belts if they are available. Prices and pics? I assume they are blue. I also would like to see the mounts as well. Thank you. __________________ 1967 K30 461/TH400/Np205/D60/14FF/BDS MTZ 375/75/16 on 16x10 Pro Comps

10-21-2013, 10:10 AM	#155
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: Parting 67 GMC CST V6 Pics of the custom badges and outer heater housing! Housing is dirty but will clean up well. there is no broken tabs or marks. YET...lol I need to get the Mirrors from storage this afternoon. Attached Images

10-21-2013, 06:05 PM	#156
gdavis Registered User Join Date: Aug 2012 Location: Homosassa, Fl. Posts: 2,965	Re: Parting 67 GMC CST V6 do you happen to have a mirrow support bracket. the one that fits inside the door from 1967 thru 69 __________________ Check out Patches Cars I owned in the past. 1962 chev II Nova - 1965 Chevelle SS - (2)1966 Chevelle SS 1965 chev C10 57 belair chev 1967 Chevelle SS - 1969 Chevelle SS - 1972 Chevelle SS 1967 Buick electra 225 1995 Harley Davidson bager What does not kill you will make you stronger 1968 c10 short wheel base stepper

10-22-2013, 08:10 AM	#158
kaphillips Registered User Join Date: Jul 2013 Location: Amarillo Tx Posts: 502	Re: Parting 67 GMC CST V6 I cant see where anyone has asked bout that under dash mount 8 track player. It appears to be era correct but not correct for our truck dealer installed item. Is it for sale? I might be interested pending pics, price, and model number. It does appear to be a GM make though. Thanks Mike

10-22-2013, 08:16 AM	#159
kaphillips Registered User Join Date: Jul 2013 Location: Amarillo Tx Posts: 502	Re: Parting 67 GMC CST V6 Sorry, after a review of a close up of the 8 track player it is an aftermarket not a GM make, I am no longer interested. Thanks

10-22-2013, 09:17 AM	#160
jabborabbo Senior Member Join Date: Apr 2013 Location: Podunk, Texas Posts: 742	Re: Parting 67 GMC CST V6 Regarding the fiberglass topper...would you by chance happen to be planning a trip south or southeast anytime in the near future? Thanks, Jerry

10-22-2013, 06:38 PM	#162
doubleRdazz Registered User Join Date: May 2011 Location: jersey Posts: 42	Re: Parting 67 GMC CST V6 What shape is the front bumper in? A little hard to tell from the pics. How much for it shipped to 08854? Thanks

10-23-2013, 08:15 PM	#164
dirtyjim Registered User Join Date: Feb 2013 Location: alvin, texas Posts: 622	Re: Parting 67 GMC CST V6 the heater box looks good. let me know if I need to pm you my full address for the shipping quote. __________________ 1967 C10 lwb two tone, 305 & rat fink style floor shifted 700r4, 20" steelies 2004 2500HD utility bed aka Brutus

12-25-2013, 11:43 AM	#165
bgwss Registered User Join Date: Oct 2011 Location: Wichita, Kansas Posts: 73	Re: Parting 67 GMC CST V6 Is that a 305 or 351, I would be interested in the exhaust manifold. __________________ 1967 custom 351E V6 3/4 long bed

12-25-2013, 12:33 PM	#166
carbuff382 Registered User Join Date: Oct 2012 Location: ALBUQUERQUE,N.M. Posts: 447	Re: Parting 67 GMC CST V6 Is the top piece on the grill available?(filler bar) Thanks

12-25-2013, 01:21 PM	#167
67carry-all Senior Member Join Date: Jul 2008 Location: Central Coast, CA Posts: 257	Re: Parting 67 GMC CST V6 Hi Mike - I'm interested in the chrome door panel retainer strips if in good shape and also the defroster vents if blue and unbroken. Thanks, Ben

12-26-2013, 06:49 PM	#169
burb71 Active Member Join Date: Oct 2002 Location: Ft. Myers, Fl Posts: 1,714	Re: Parting 67 GMC CST V6 Is the stainless trim on the rear window still there and in good condition? If so how much$

12-26-2013, 07:26 PM	#170
cxune Registered User Join Date: Aug 2003 Location: Houston, Texas Posts: 68	Re: Parting 67 GMC CST V6 Any chance you've got a clutch return helper spring in all your stuff that would work on a Saginaw? Mine broke today. :P



Register or Log In To remove these advertisements.

12-27-2013, 12:16 AM	#172
cxune Registered User Join Date: Aug 2003 Location: Houston, Texas Posts: 68	Re: Parting 67 GMC CST V6 Sounds great- how much on the spring with shipping to 77375? And can you PM me your paypal? Thanks!

12-27-2013, 02:15 PM	#173
powell72 Senior Member Join Date: Jan 2005 Location: Loveland Co. Posts: 3,098	Re: Parting 67 GMC CST V6 Are the escutcheons for the door handles and window cranks available? Also interested in the passenger window crank. I may also be interested in the arm rests. __________________ Chris 74 Custom Deluxe SWB 350/350/3.73’s 99 2wd Silverado RCSB 5.3/4L60/3.90’s http://www.classictrucks.com/feature...short_bed.html

Register or Log In To remove these advertisements.