Project "Rock-a-Billy".....Saga Continues..... - Page 7 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

leftcoast66 · 04-17-2007, 11:49 PM

Love ur truck, if it were on bags we'd darn near be twins. Great work.

67Cowboy · 04-18-2007, 03:30 AM

Quote:

Originally Posted by ChiefRocka

I thought this was weird how GM mounted the 3-speed in this truck...it's hung by the belhousing, and nothing in the tailend....it actualy supports the load better, as the tranny is so light.
This will have to be changed eventually...due to the fact that this bell-housing x-member hangs below the frame.....definately don't want that.....this will prevent me form laying frame in the future...

In the future, a new e-brake/tranny x-member will be made up.
John

Hey John, if you deside to pull that cross member give me a holler, cause I bought an old big block with a 5 speed, and that's the cross member I need. Mine's a high-boy any way so I don't care about it hangin I just need a way to bolt this thing in !!!

slammed1966chevy · 04-18-2007, 06:47 AM

Looks good

**ChiefRocka** · 04-18-2007, 09:06 AM

Thanks man

**ChiefRocka** · 04-18-2007, 07:33 PM

All I got done yesterday was finish up my brake lines....

-

John

rainmans63 · 04-18-2007, 07:40 PM

It just gets better everyday! Nice work as always buddy!

**ChiefRocka** · 04-19-2007, 09:54 AM

Quote:

Originally Posted by rainmans63

It just gets better everyday! Nice work as always buddy!

Right on Rainman..thanks

John

slammed1966chevy · 04-19-2007, 08:26 PM

nice =)

**ChiefRocka** · 04-20-2007, 12:23 AM

Nothing today...just a before & after pics..what a difference, huh ??

BEFORE:
-
-

-
-
AFTER
-
-

-
-
John

Jonboy · 04-20-2007, 08:59 AM

It looks like you are almost ready for the road. Looks great. What do you lack to drive it?

LOW DOUGH · 04-20-2007, 01:36 PM

That engine bay looks much better. Nice and clean

**ChiefRocka** · 04-20-2007, 02:21 PM

Quote:

Originally Posted by Jonboy

It looks like you are almost ready for the road. Looks great. What do you lack to drive it?

Well...I dropped my radiator yesterday....he called me, it's all done. I'm stick'n with the stock radiator for now (I beleive its a 6-cyl radiator, that was recored to a 3-row at somepoint). It cooled the 350 before, we will see.

I need to pick up the rad and heater hoses, built a new battery box, wire it, hook up the clutch linkage, bleed the brakes.... and the get the exhaust done.

I really wanted to do the exhaust myself, but my brand new bender is lacking a hydraulic pump, so I might have to take the truck somewhere.

I ordered a few things from Classic that it needs...a clutch rod, couple firewall grommets, and a new engine side harness'...they should be in soon.

Really isn't much, but when you running two shops at one time, and handling a wonderfull family...time seems to run extremlly short !!!

Trying to make Vacaville on the 19th......actually want to make the May 5th weekend (cinco de Mayo)...here in San Jose there is MAJOR cruiz'n that weekend !!!

John

**slepysal** · 04-20-2007, 02:39 PM

AHHH YES, Cinco De Mayo, Great cruz'in ! I think I'll put on my old Daytons
And take a ride Down Town Chief, your ride is looking good !!!

**ChiefRocka** · 04-21-2007, 04:39 AM

Quote:

Originally Posted by slepysal

AHHH YES, Cinco De Mayo, Great cruz'in ! I think I'll put on my old Daytons
And take a ride Down Town Chief, your ride is looking good !!!

Yeah...DAYTONS !!!!....I remember when I had my 'real' set on my 64 Impala wagon.

Here's a few pics for tonight....

I rewelded the clutch arms...I noticed the levers were only welded on one side.....not neccesary, but.....

Got the radiator back from a clean up......

Hard to tell in this picture, but my alternator is not perfect yet...rear brace needs to be adjusted a tad....

John

19GMC63 · 04-21-2007, 05:39 PM

wow, that before and after pic is amazing. Nice job.

Whats the deal with that water neck?

62 short step · 04-21-2007, 06:35 PM

Damn!! That engine compartment looks awesome!!!

**ChiefRocka** · 04-21-2007, 08:45 PM

Quote:

Originally Posted by 19GMC63

wow, that before and after pic is amazing. Nice job.

Whats the deal with that water neck?

Thats a polished aluminum o-ring unit. The base slips over the neck...you then can aim the output any where you want. Available in different degrees...kinda cool...I have one on my wifes 57

John

67Cowboy · 04-21-2007, 10:15 PM

Hey John it really looks good, I have the same water-neck. I picked it up at Pammona Swap meet, But I also got one of those self Sacrificing "Rad-Cap" that has the little anode on it. You might have noticed the inside of that neck is bare aluminum and they corrode in a hurry, I think I'm gonna have mine clear powder coated inside and out, when I get my intake done. Also I found something really cool today from Kragens, a billet battery hold down for $6.99 I thought that was dang cheap for billet !!!

xtreme80 · 04-22-2007, 03:31 AM

Quote:

Originally Posted by 67Cowboy

Hey John it really looks good, I have the same water-neck. I picked it up at Pammona Swap meet, But I also got one of those self Sacrificing "Rad-Cap" that has the little anode on it. You might have noticed the inside of that neck is bare aluminum and they corrode in a hurry, I think I'm gonna have mine clear powder coated inside and out, when I get my intake done. Also I found something really cool today from Kragens, a billet battery hold down for $6.99 I thought that was dang cheap for billet !!!

That is dang cheap, but I don't think I could be caught dead with that logo on my truck!

At least not where I'm from, that is...

**ChiefRocka** · 04-22-2007, 09:17 AM

Quote:

Originally Posted by 67Cowboy

Hey John it really looks good, I have the same water-neck. I picked it up at Pammona Swap meet, But I also got one of those self Sacrificing "Rad-Cap" that has the little anode on it. You might have noticed the inside of that neck is bare aluminum and they corrode in a hurry, I think I'm gonna have mine clear powder coated inside and out, when I get my intake done. Also I found something really cool today from Kragens, a billet battery hold down for $6.99 I thought that was dang cheap for billet !!!

WOW...that is cheap !!! I'm gonna go down there and pick......wait a minute.....xtreme80....your right about the logo !!!!

I don't know ?!?!?!

John

**ChiefRocka** · 04-22-2007, 07:12 PM

My clutch linkage was WAY worn out !!!

All the ends of the rods had worn almost completely thru..and the holes were ob-long.

I checked my master-cylinder push-rod, and it will adjust out fine.

I working on getting all the slack out of the rods now.....

Pics soon....

John

**ChiefRocka** · 04-25-2007, 10:12 AM

Well, here's some shots of the worn out clutch rod and lever.....

-

-
-
So what I did, is cut off the ends...cut some threads...and add some rod-ends....
-
-

-

After doing all this...I realized it wasn't really necessary...considering it's been like that for over 40 yrs !!!

I could of just welded up the grooves and sanded smooth..but anyway...It's alot better now !!!

**ChiefRocka** · 04-25-2007, 10:20 AM

Since my tubing bender won't be up and running anytime soon...I picked up these U-bends from my buddy....I have some old Flows and some tips, so I'm good to go on the exhaust.

My order came in from Classic, so I am good to go..I have everything I need to complete it...just need some time !!!

-
-
Misc pics:
-

-

John

drewmangoo · 04-25-2007, 11:19 AM

Truck is look nice ass hell.

**slepysal** · 04-25-2007, 11:31 AM

SHAAAAAA------WING ! Nice very nice looking real good !

04-17-2007, 11:49 PM	#151
leftcoast66 Registered User Join Date: Sep 2006 Location: Covington, WA Posts: 770	Re: Project "Rock-a-Billy".....Saga Continues..... Love ur truck, if it were on bags we'd darn near be twins. Great work.

04-18-2007, 06:47 AM	#153
slammed1966chevy Registered User Join Date: Jan 2007 Location: Bentonville / Arkansas Posts: 226	Re: Project "Rock-a-Billy".....Saga Continues..... Looks good

04-18-2007, 09:06 AM	#154
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,147	Re: Project "Rock-a-Billy".....Saga Continues..... Thanks man __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!" Last edited by ChiefRocka; 04-18-2007 at 09:06 AM.

04-18-2007, 07:33 PM	#155
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,147	Re: Project "Rock-a-Billy".....Saga Continues..... All I got done yesterday was finish up my brake lines.... - John __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!" Last edited by ChiefRocka; 05-25-2007 at 09:04 PM.

04-18-2007, 07:40 PM	#156
rainmans63 Registered User Join Date: Feb 2006 Location: Fremont, CA Posts: 29	Re: Project "Rock-a-Billy".....Saga Continues..... It just gets better everyday! Nice work as always buddy!

04-19-2007, 08:26 PM	#158
slammed1966chevy Registered User Join Date: Jan 2007 Location: Bentonville / Arkansas Posts: 226	Re: Project "Rock-a-Billy".....Saga Continues..... nice =)

04-20-2007, 12:23 AM	#159
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,147	Re: Project "Rock-a-Billy".....Saga Continues..... Nothing today...just a before & after pics..what a difference, huh ?? BEFORE: - - - - AFTER - - - - John __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!" Last edited by ChiefRocka; 05-25-2007 at 09:05 PM.

04-20-2007, 08:59 AM	#160
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: Project "Rock-a-Billy".....Saga Continues..... It looks like you are almost ready for the road. Looks great. What do you lack to drive it?

04-20-2007, 01:36 PM	#161
LOW DOUGH I'M TRUCK CRAZY! Join Date: Oct 2006 Location: Sachse, TEXAS Posts: 1,737	Re: Project "Rock-a-Billy".....Saga Continues..... That engine bay looks much better. Nice and clean

04-20-2007, 02:39 PM	#163
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: Project "Rock-a-Billy".....Saga Continues..... AHHH YES, Cinco De Mayo, Great cruz'in ! I think I'll put on my old Daytons And take a ride Down Town Chief, your ride is looking good !!!

04-21-2007, 05:39 PM	#165
19GMC63 Registered User Join Date: Nov 2006 Location: Nashville, TN Posts: 1,510	Re: Project "Rock-a-Billy".....Saga Continues..... wow, that before and after pic is amazing. Nice job. Whats the deal with that water neck?

04-21-2007, 06:35 PM	#166
62 short step Senior Member Join Date: Aug 2005 Location: Greenwell Springs, Louisiana Posts: 2,882	Re: Project "Rock-a-Billy".....Saga Continues..... Damn!! That engine compartment looks awesome!!!

04-21-2007, 10:15 PM	#168
67Cowboy "GOD BLESS AMERICA !!!" Join Date: Sep 2006 Location: What use to be a free country Posts: 184	Re: Project "Rock-a-Billy".....Saga Continues..... Hey John it really looks good, I have the same water-neck. I picked it up at Pammona Swap meet, But I also got one of those self Sacrificing "Rad-Cap" that has the little anode on it. You might have noticed the inside of that neck is bare aluminum and they corrode in a hurry, I think I'm gonna have mine clear powder coated inside and out, when I get my intake done. Also I found something really cool today from Kragens, a billet battery hold down for $6.99 I thought that was dang cheap for billet !!! Attached Images

04-22-2007, 07:12 PM	#171
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,147	Re: Project "Rock-a-Billy".....Saga Continues..... My clutch linkage was WAY worn out !!! All the ends of the rods had worn almost completely thru..and the holes were ob-long. I checked my master-cylinder push-rod, and it will adjust out fine. I working on getting all the slack out of the rods now..... Pics soon.... John __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

04-25-2007, 10:12 AM	#172
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,147	Re: Project "Rock-a-Billy".....Saga Continues..... Well, here's some shots of the worn out clutch rod and lever..... - - - So what I did, is cut off the ends...cut some threads...and add some rod-ends.... - - - - After doing all this...I realized it wasn't really necessary...considering it's been like that for over 40 yrs !!! I could of just welded up the grooves and sanded smooth..but anyway...It's alot better now !!! __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!" Last edited by ChiefRocka; 05-25-2007 at 09:08 PM.



Register or Log In To remove these advertisements.

04-25-2007, 10:20 AM	#173
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,147	Re: Project "Rock-a-Billy".....Saga Continues..... Since my tubing bender won't be up and running anytime soon...I picked up these U-bends from my buddy....I have some old Flows and some tips, so I'm good to go on the exhaust. My order came in from Classic, so I am good to go..I have everything I need to complete it...just need some time !!! - - Misc pics: - - John __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!" Last edited by ChiefRocka; 05-25-2007 at 09:09 PM.

04-25-2007, 11:19 AM	#174
drewmangoo Registered User Join Date: Mar 2006 Location: Fairview Heights, Illinois Posts: 139	Re: Project "Rock-a-Billy".....Saga Continues..... Truck is look nice ass hell. __________________ Keep knockin' on the Devils door, eventually someone's gonna answer. 1965 c10 Longbed Fleetside 1972 Chevelle (wife's car) 2002 Suburban (wife's car)

04-25-2007, 11:31 AM	#175
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: Project "Rock-a-Billy".....Saga Continues..... SHAAAAAA------WING ! Nice very nice looking real good !

Register or Log In To remove these advertisements.