KS 1972 custom camper cheyenne Big block AC truck getting parted - Page 7 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**tll74** · 03-19-2012, 01:49 AM

Hi Randy,
heat shield and tube $140...........I'll pass
air cleaner spacer and hose $24........ I'll take it
ebrake and brake pedal chrome and pads $12.......... I'll pass
cheyenne emblems $20...... I'll take them
grill bowtie, blue has some funny look but no cracks $15 ........I'll pass
RH headlight bezel........price?
Fuel sending unit, bad........typical!
slider, latch is broke off, needs seal slid back in $40 ........I'll pass
visors are pretty good $20........ I'll take them
bat cables, not original......darn it
no heat shield......ok
engine wiring, I know it has one wire broke, not sure on rest, will check when I pull motor.........ok
trans vac line $10..........I'll take it
fuel line is good $15........I'll take it
wing window screws and chrome pieces $8.........If not rusty..I'll take it
I may have some other 400 emblems out there....nice one's not pitted?
distrib vac line......price?....I'll take it
carb, has been redone $50.......I'll pass
distrib $15........I'll take it
wings are not bad but need new rubbers and some light pitting $40...I'll pass
all plus shipping

Plug heat sheilds still for grabs? Valve covers have a home yet?
You got more time on the computer than it took to disassemble this truck! You are the KING, I don't know how you do it!!
Thanks, Tom

**burb71** · 03-19-2012, 03:52 AM

Randy Im passing on the vent windows

My72BB · 03-19-2012, 07:54 AM

Quote:

Originally Posted by teeitup

My72BB, Alan,
All AC lines $30 OK
Engine hoist brackets $15 OK
carb, $50, 2nd on it OK Is that epoxy??? Comes w/Choke Stove?
distr vac line 2nd on it Gone-SOLD
valve covers $25 OK Hopefully bolts and keepers come with?
Spacer $24 2nd on it Gone-SOLD
heater hose bracket OK
All plus shipping
Thanks Randy

Randy...I don't know how you keep up with this stuff but GOOD JOB!

I noted what I'll take and what has been spoken for. Would also like to take the following please and add to my list:

Spark plug heat covers with screws (8) in picture #114
Oil Dipstick/Tube if still available (I thought I saw someone in line???) picture #113 I think I'm 2nd in line?
How much for Brake Booster?
How much for Exhaust Manifolds w/bolts?

Thanks...No hurry also...just get back to me when you can.

Alan

teeitup · 03-19-2012, 08:12 AM

zicc1835, Jess, Thanks

Already Gone, Greg, no problem but do realize that you are only talking about 4 lower little screws, 2 each on bottom of outer vents, that I took off, that I can probably find in the bucket. And with those vents in there while shipping, they would more than likely get broke being on a corner like they are. Center vent is no biggy, it slips back into place with the 2 nuts

Tom, I'll get all your stuff together and get a pic of it all and get pics of screws. Spark plug shields $15 for 8. Valve covers sold. Distrib vac line $5, headlight bezel $5. THANKS for the compliment!!

Burb71, no problem

Alan, carb, I'm not sure what that stuff on carb is, It got dark on me last night I'll check later today on it. Spark plug shields $15, your 2nd on and also 2nd on the dipstick and tube $15, I may have another one out there. Brake booster $40 plus ship. I'll have to look and see if I can all the exhaust maniold bolts. Also THANKS to you for the compliment!!

Thanks to all, Randy

teeitup · 03-19-2012, 08:21 AM

critterman71, Chris, your up on slider

29od1, David, your up on wings is still interested

Gary 70 Jimmy, your up on tube and heat shield

4xshort, Josh, your up on the brake and ebrake pads and rings

Thanks Randy

chewychevy67 · 03-19-2012, 10:00 AM

if they are not damaged i need a pair of shoulder belt delete plugs in this color blue if they are not damaged along with the exhaust hangers. Rod.

**70STOVEBOLT** · 03-19-2012, 12:27 PM

Quote:

Originally Posted by teeitup

79stovebolt, Mark, cab divider trim is good, $25 shipped. Thanks Randy

Randy, I'll get you a money order out today or tomorrow.

Thanks,
Mark

**Gary 70 Jimmy** · 03-19-2012, 12:38 PM

Quote:

Originally Posted by teeitup

critterman71, Chris, your up on slider

29od1, David, your up on wings is still interested

Gary 70 Jimmy, your up on tube and heat shield

4xshort, Josh, your up on the brake and ebrake pads and rings

Thanks Randy

$140.00 is to much for me.

teeitup · 03-19-2012, 12:50 PM

Rod, this truck has siler ones in it for some reason. Also I crawled under it this morning, it has all 6 hangers under it

Mark, sounds good, Thanks

Gary, no problem

Thanks Randy

**29od1** · 03-19-2012, 12:52 PM

Randy I'm going to pass on the wings but thank you.
David

**michael bustamante** · 03-19-2012, 12:54 PM

Do you still have the 400 tranny throttle linkage stuff?

teeitup · 03-19-2012, 12:59 PM

No problem David

Michael, this setup is sold, but I have another setup out there, I'll get pics after work

Thanks Randy

**michael bustamante** · 03-19-2012, 01:38 PM

Ok thanks

**88JRFAN** · 03-19-2012, 01:54 PM

Money order sent off today. Thanks Randy!! Daren

REEDS 72 · 03-19-2012, 06:00 PM

Hi I will take the dipstick and tube and wait to see if I can get the fuel line paypal ok? thank you randy.

teeitup · 03-19-2012, 06:34 PM

Thanks Daren

Reeds72, tll74 is taking the fuel line, sorry. So its just the dipstick and tube

Thanks Randy

teeitup · 03-19-2012, 06:41 PM

4xshort, Josh, here ya go

teeitup · 03-19-2012, 06:41 PM

moreeeeeeeeeeeeee

teeitup · 03-19-2012, 06:43 PM

Michael Bustamonte, I have this setup, its missing the portion of wire from outer firewall to tranny

teeitup · 03-19-2012, 06:44 PM

tll74, Tom, I have these 2 sets

teeitup · 03-19-2012, 06:45 PM

My72BB, Alan, I have this dipstick and tube off another 402 I parted

teeitup · 03-19-2012, 07:17 PM

Zicc1835, sorry Jess its hacked up. Thanks Randy

teeitup · 03-19-2012, 07:17 PM

Sorry guys no parting tonight, raining here, and its supposed to do that all week unfortunately

**Dave** · 03-19-2012, 08:03 PM

Randy, I need the frame brkt for the trans shift linkage for BB. LMK.
Thanks Dave..

teeitup · 03-19-2012, 08:44 PM

Dave, sorry all I have are 2 sets of turbo 400 linkage. I do have a 4x4 frame bracket but its shorter as you know. Thanks Randy

03-19-2012, 01:49 AM	#151
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,527	Re: 1972 custom camper cheyenne Big block AC truck getting parted Hi Randy, heat shield and tube $140...........I'll pass air cleaner spacer and hose $24........ I'll take it ebrake and brake pedal chrome and pads $12.......... I'll pass cheyenne emblems $20...... I'll take them grill bowtie, blue has some funny look but no cracks $15 ........I'll pass RH headlight bezel........price? Fuel sending unit, bad........typical! slider, latch is broke off, needs seal slid back in $40 ........I'll pass visors are pretty good $20........ I'll take them bat cables, not original......darn it no heat shield......ok engine wiring, I know it has one wire broke, not sure on rest, will check when I pull motor.........ok trans vac line $10..........I'll take it fuel line is good $15........I'll take it wing window screws and chrome pieces $8.........If not rusty..I'll take it I may have some other 400 emblems out there....nice one's not pitted? distrib vac line......price?....I'll take it carb, has been redone $50.......I'll pass distrib $15........I'll take it wings are not bad but need new rubbers and some light pitting $40...I'll pass all plus shipping Plug heat sheilds still for grabs? Valve covers have a home yet? You got more time on the computer than it took to disassemble this truck! You are the KING, I don't know how you do it!! Thanks, Tom __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw

03-19-2012, 03:52 AM	#152
burb71 Active Member Join Date: Oct 2002 Location: Ft. Myers, Fl Posts: 1,714	Re: 1972 custom camper cheyenne Big block AC truck getting parted Randy Im passing on the vent windows

03-19-2012, 08:12 AM	#154
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 1972 custom camper cheyenne Big block AC truck getting parted zicc1835, Jess, Thanks Already Gone, Greg, no problem but do realize that you are only talking about 4 lower little screws, 2 each on bottom of outer vents, that I took off, that I can probably find in the bucket. And with those vents in there while shipping, they would more than likely get broke being on a corner like they are. Center vent is no biggy, it slips back into place with the 2 nuts Tom, I'll get all your stuff together and get a pic of it all and get pics of screws. Spark plug shields $15 for 8. Valve covers sold. Distrib vac line $5, headlight bezel $5. THANKS for the compliment!! Burb71, no problem Alan, carb, I'm not sure what that stuff on carb is, It got dark on me last night I'll check later today on it. Spark plug shields $15, your 2nd on and also 2nd on the dipstick and tube $15, I may have another one out there. Brake booster $40 plus ship. I'll have to look and see if I can all the exhaust maniold bolts. Also THANKS to you for the compliment!! Thanks to all, Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 03-19-2012 at 08:18 AM.

03-19-2012, 08:21 AM	#155
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 1972 custom camper cheyenne Big block AC truck getting parted critterman71, Chris, your up on slider 29od1, David, your up on wings is still interested Gary 70 Jimmy, your up on tube and heat shield 4xshort, Josh, your up on the brake and ebrake pads and rings Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 03-19-2012 at 08:31 AM.

03-19-2012, 10:00 AM	#156
chewychevy67 Registered User Join Date: Jan 2010 Location: Here Posts: 5,426	Re: 1972 custom camper cheyenne Big block AC truck getting parted if they are not damaged i need a pair of shoulder belt delete plugs in this color blue if they are not damaged along with the exhaust hangers. Rod.

03-19-2012, 12:50 PM	#159
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 1972 custom camper cheyenne Big block AC truck getting parted Rod, this truck has siler ones in it for some reason. Also I crawled under it this morning, it has all 6 hangers under it Mark, sounds good, Thanks Gary, no problem Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-19-2012, 12:52 PM	#160
29od1 Senior Member Join Date: Oct 2006 Location: Wichita, Kansas Posts: 1,050	Re: 1972 custom camper cheyenne Big block AC truck getting parted Randy I'm going to pass on the wings but thank you. David

03-19-2012, 12:54 PM	#161
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,840	Re: 1972 custom camper cheyenne Big block AC truck getting parted Do you still have the 400 tranny throttle linkage stuff? __________________ 1967custom

03-19-2012, 12:59 PM	#162
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 1972 custom camper cheyenne Big block AC truck getting parted No problem David Michael, this setup is sold, but I have another setup out there, I'll get pics after work Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-19-2012, 01:38 PM	#163
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,840	Re: 1972 custom camper cheyenne Big block AC truck getting parted Ok thanks __________________ 1967custom

03-19-2012, 01:54 PM	#164
88JRFAN LET'S GO RACIN' Join Date: Oct 2007 Location: SALINA,KS Posts: 1,212	Re: 1972 custom camper cheyenne Big block AC truck getting parted Money order sent off today. Thanks Randy!! Daren __________________ Daren 04 Chevy Extend cab 2500HD 6.0 Liter 4x4 71 CHEVY 3/4 4X4 402 BB, th400/np205, dana44/eaton ho52 w/4:10-TOY Rip El Jay RIP BOBBO'S MOM

03-19-2012, 06:00 PM	#165
REEDS 72 Registered User Join Date: Apr 2011 Location: AMERICAN FORK, UTAH Posts: 535	Re: 1972 custom camper cheyenne Big block AC truck getting parted Hi I will take the dipstick and tube and wait to see if I can get the fuel line paypal ok? thank you randy.

03-19-2012, 06:34 PM	#166
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 1972 custom camper cheyenne Big block AC truck getting parted Thanks Daren Reeds72, tll74 is taking the fuel line, sorry. So its just the dipstick and tube Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-19-2012, 06:41 PM	#167
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 1972 custom camper cheyenne Big block AC truck getting parted 4xshort, Josh, here ya go Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-19-2012, 06:41 PM	#168
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 1972 custom camper cheyenne Big block AC truck getting parted moreeeeeeeeeeeeee Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"



Register or Log In To remove these advertisements.

03-19-2012, 06:43 PM	#169
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 1972 custom camper cheyenne Big block AC truck getting parted Michael Bustamonte, I have this setup, its missing the portion of wire from outer firewall to tranny Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-19-2012, 06:44 PM	#170
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 1972 custom camper cheyenne Big block AC truck getting parted tll74, Tom, I have these 2 sets Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-19-2012, 06:45 PM	#171
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 1972 custom camper cheyenne Big block AC truck getting parted My72BB, Alan, I have this dipstick and tube off another 402 I parted Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-19-2012, 07:17 PM	#172
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 1972 custom camper cheyenne Big block AC truck getting parted Zicc1835, sorry Jess its hacked up. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-19-2012, 07:17 PM	#173
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 1972 custom camper cheyenne Big block AC truck getting parted Sorry guys no parting tonight, raining here, and its supposed to do that all week unfortunately __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-19-2012, 08:03 PM	#174
Dave DND Trucks Join Date: Dec 1999 Location: NW Indiana Posts: 2,376	Re: 1972 custom camper cheyenne Big block AC truck getting parted Randy, I need the frame brkt for the trans shift linkage for BB. LMK. Thanks Dave..

03-19-2012, 08:44 PM	#175
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 1972 custom camper cheyenne Big block AC truck getting parted Dave, sorry all I have are 2 sets of turbo 400 linkage. I do have a 4x4 frame bracket but its shorter as you know. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

Register or Log In To remove these advertisements.