KS 1972 GMC BB 3/4 ton Super Custom - Page 7 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

best view · 12-31-2013, 11:13 PM

that driver fender is perfect match for my truck the patina is perfect let me know how much shipped to 02367 that's my warehouse and ill get you the money if you have pass side let me know ken

**Cash3481** · 01-01-2014, 12:49 AM

Quote:

Originally Posted by rusty knuckles 5

HI! i am seeing that a red wire was cut off on the plug can you tell me what it is for and also my truck has the common type gauge cluster will this harness work for my truck thanks

I'll look for another one tomorrow and see if it's any better.

Quote:

Originally Posted by best view

that driver fender is perfect match for my truck the patina is perfect let me know how much shipped to 02367 that's my warehouse and ill get you the money if you have pass side let me know ken

I'll get you a good pic in the light. I think I may have a pass side same color or close match. I've parted several ochre trucks.
Mike

rusty knuckles 5 · 01-01-2014, 01:04 AM

HI! thanks, any help with this wiring is appreciated

darkhorse970 · 01-10-2014, 08:27 PM

Factory big block oil pressure gauge line w/correct block fitting. $40 shipped.

I'm interested in this if you still have it, pending pics.

**Cash3481** · 01-14-2014, 02:00 PM

Quote:

Originally Posted by darkhorse970

Factory big block oil pressure gauge line w/correct block fitting. $40 shipped.

I'm interested in this if you still have it, pending pics.

Here are the lines I have.

Mike

**Cash3481** · 01-14-2014, 11:18 PM

Best view,
Here are the fender pics.
I have been lazy to get these loaded for you and I apologize for it.
One has a dent on the rear of the fender opening and the other needs a cup and the rear has a rusted spot but if they matched your patina its your call.

Mike

**gmc 2500 4x4** · 11-07-2014, 06:44 PM

do you still have the carb from this?

doo142 · 11-07-2014, 10:00 PM

I need mirrors like the ones on this truck in 1st pic. Do you have a nice set? Thanks

**Cash3481** · 11-08-2014, 09:37 AM

Quote:

Originally Posted by gmc 2500 4x4

do you still have the carb from this?

I have a BB carb out there, I think it's a 72 automatic carb. I'll get the pics today and post them tonight.

Quote:

Originally Posted by doo142

I need mirrors like the ones on this truck in 1st pic. Do you have a nice set? Thanks

I'm pretty sure I have another set. I'll get you a picture today too. I think this is the DG4 mirror if I'm not mistaken.

**gmc 2500 4x4** · 11-08-2014, 09:46 AM

ok, let me know the carb# also>>>>>>>thanx! paul

**Cash3481** · 11-08-2014, 10:24 PM

Quote:

Originally Posted by gmc 2500 4x4

ok, let me know the carb# also>>>>>>>thanx! paul

Paul,
Here are the carb numbers
7080206
7042208
17C58213
I have a few others if your interested.

Quote:

Originally Posted by doo142

I need mirrors like the ones on this truck in 1st pic. Do you have a nice set? Thanks

I didn't have a set. I'll see if my friend has a set on Tuesday or Wednesday when I see him.

doo142 · 11-09-2014, 02:19 AM

Quote:

Originally Posted by Cash3481

Paul,
Here are the carb numbers
7080206
7042208
17C58213
I have a few others if your interested.

I didn't have a set. I'll see if my friend has a set on Tuesday or Wednesday when I see him.

Ok, thanks for checking

**gmc 2500 4x4** · 11-09-2014, 06:44 AM

7042219 is what im after, but any 71-72 bb 402 will work

**Cash3481** · 11-09-2014, 10:19 AM

Quote:

Originally Posted by gmc 2500 4x4

7042219 is what im after, but any 71-72 bb 402 will work

I think there is a 2218 parts carb out there too. I'll research the numbers and post the years tomorrow.

**Oddfire** · 11-09-2014, 09:13 PM

Do you have any unmolested GMC forward light wiring harnesses?
Jamie 71

Longhorn

**Cash3481** · 11-09-2014, 09:35 PM

Quote:

Originally Posted by Oddfire

Do you have any unmolested GMC forward light wiring harnesses?
Jamie 71

Longhorn

Hey Jamie! I believe I only have a 67 GMC harness. I can bring the thread ttt if you're interested. Let me know.

**Oddfire** · 11-09-2014, 10:20 PM

Unless I'm wrong on this I believe all 67-72 GMC forward light harnesses are the same. If I'm incorrect on this plz correct me. I'm very interested in the one you have if it's uncut (all original terminals) Jamie

**Cash3481** · 11-09-2014, 10:36 PM

Quote:

Originally Posted by Oddfire

Unless I'm wrong on this I believe all 67-72 GMC forward light harnesses are the same. If I'm incorrect on this plz correct me. I'm very interested in the one you have if it's uncut (all original terminals) Jamie

Jamie,
I thought the 67s wouldn't have marker lights! Isn't that correct?
I brought it TTT. I can get better pics tomorrow of any concerns or questions.
http://67-72chevytrucks.com/vboard/s...d.php?t=614125
Let me know in that thread please.

**Oddfire** · 11-10-2014, 04:10 AM

You are correct on that. There are no side marker lights on the 67s. I should've
known better but I wasn't thinking lol. Since my truck is a 71 I will have to pass. Thanks for the info. Jamie

**70STOVEBOLT** · 11-10-2014, 08:56 AM

Mike, do you still have the motor? I don't need the trans, just the basic motor. If so, what can you tell me about it and how much do you want for it?

Thanks,
Mark

**Cash3481** · 11-10-2014, 11:19 AM

Quote:

Originally Posted by 70STOVEBOLT

Mike, do you still have the motor? I don't need the trans, just the basic motor. If so, what can you tell me about it and how much do you want for it?

Thanks,
Mark

Mark,
Sorry I sold the motor tranny complete.
Ill update the thread. This is an old thread!

**70STOVEBOLT** · 11-10-2014, 11:21 AM

Yeah, I know it's an old thread, but I didn't see where the engine had sold. Thanks for the reply.

12-31-2013, 11:13 PM	#151
best view Registered User Join Date: Apr 2009 Location: newbury new hampsire Posts: 2,012	Re: 1972 GMC BB 3/4 ton Super Custom that driver fender is perfect match for my truck the patina is perfect let me know how much shipped to 02367 that's my warehouse and ill get you the money if you have pass side let me know ken

01-01-2014, 01:04 AM	#153
rusty knuckles 5 Registered User Join Date: Dec 2011 Location: coulterville calif Posts: 263	Re: 1972 GMC BB 3/4 ton Super Custom HI! thanks, any help with this wiring is appreciated

01-10-2014, 08:27 PM	#154
darkhorse970 Registered User Join Date: May 2009 Location: Monroe, LA Posts: 2,103	Re: 1972 GMC BB 3/4 ton Super Custom Factory big block oil pressure gauge line w/correct block fitting. $40 shipped. I'm interested in this if you still have it, pending pics. __________________ Keith SOLD - 1963 C10 Short Fleet 350/700R4 4/6 drop 1967 GMC Super Custom - Short Fleet COPO concept w/427 BBC T-400 w/Doug Nash overdrive 4/6 Drop, Buddy Buckets, etc... Frame Off (In Progress) I call it "Vulgar Display of Power" 1980 Silverado Original paint 49k Original miles 4/6 drop Check out my build thread here: http://67-72chevytrucks.com/vboard/s...=1#post6209941

01-14-2014, 11:18 PM	#156
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: 1972 GMC BB 3/4 ton Super Custom Best view, Here are the fender pics. I have been lazy to get these loaded for you and I apologize for it. One has a dent on the rear of the fender opening and the other needs a cup and the rear has a rusted spot but if they matched your patina its your call. Mike Attached Images

11-07-2014, 06:44 PM	#157
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,894	Re: 1972 GMC BB 3/4 ton Super Custom do you still have the carb from this?

11-07-2014, 10:00 PM	#158
doo142 Registered User Join Date: Jan 2013 Location: Bristol,In. Posts: 1,115	Re: 1972 GMC BB 3/4 ton Super Custom I need mirrors like the ones on this truck in 1st pic. Do you have a nice set? Thanks

11-08-2014, 09:46 AM	#160
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,894	Re: 1972 GMC BB 3/4 ton Super Custom ok, let me know the carb# also>>>>>>>thanx! paul

11-09-2014, 06:44 AM	#163
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,894	Re: 1972 GMC BB 3/4 ton Super Custom 7042219 is what im after, but any 71-72 bb 402 will work

11-09-2014, 09:13 PM	#165
Oddfire Senior Member Join Date: Jan 2013 Location: Front Royal, Va Posts: 689	Re: 1972 GMC BB 3/4 ton Super Custom Do you have any unmolested GMC forward light wiring harnesses? Jamie 71 Longhorn

11-09-2014, 10:20 PM	#167
Oddfire Senior Member Join Date: Jan 2013 Location: Front Royal, Va Posts: 689	Re: 1972 GMC BB 3/4 ton Super Custom Unless I'm wrong on this I believe all 67-72 GMC forward light harnesses are the same. If I'm incorrect on this plz correct me. I'm very interested in the one you have if it's uncut (all original terminals) Jamie

11-10-2014, 04:10 AM	#169
Oddfire Senior Member Join Date: Jan 2013 Location: Front Royal, Va Posts: 689	Re: 1972 GMC BB 3/4 ton Super Custom You are correct on that. There are no side marker lights on the 67s. I should've known better but I wasn't thinking lol. Since my truck is a 71 I will have to pass. Thanks for the info. Jamie

11-10-2014, 08:56 AM	#170
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,234	Re: 1972 GMC BB 3/4 ton Super Custom Mike, do you still have the motor? I don't need the trans, just the basic motor. If so, what can you tell me about it and how much do you want for it? Thanks, Mark __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

11-10-2014, 11:21 AM	#172
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,234	Re: 1972 GMC BB 3/4 ton Super Custom Yeah, I know it's an old thread, but I didn't see where the engine had sold. Thanks for the reply. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.