63-87 rack and pinion

[mmiddle]

Originally Posted by robnolimit

Yes, these did start out as a Chevy 1/2 ton rack, the pass side housing is rotated, and the inner tie rod ends are custom machined. One big benefit is that seals, bushings, shafts, bearings and boots for these will be around for ever. Also, P/S hoses will be easy to fit by using the OE chevy hoses (99-08)

Crap... You guys are going to cost me a lot of money!

[robnolimit]

Originally Posted by mmiddle

Crap... You guys are going to cost me a lot of money!

Hmmm, New close ratio box, $429. new inner and outer tie rod ends, $138.44. new idler arm, $47.35. thats $614.79 for the stocky way. So, for the low low price difference of only $234.21 (insert loud aussie voice here) you, yes you can have a better driving, quicker driving truck. Operators are standing buy NOW

[Last_Paladin]

So I got one through Brothers, thanks for drop shipping.


I have the entire crossmember off. Is there any advantage to welding your bracket on?

Also, what's the bump steer like with this kit?

[akdg87]

anyone have issues with their rack moving side to side, mine will move a bit and throw the wheel off center.

Also im using mine with an LS P/S pump and it seems very "reactive", seems like i should put a pressure reduction kit in it to tone it down. Anyone else done that?

[68GMCCustom]

whoa......price on this page says $849

Power Steering Rack & Pinion Kit

designed for 1963-87 Chevy Pickups

Complete Kit .......$849.00

click here to order yours today

http://www.nolimitparts.com/


.......yet when you click to purchase you go to this page and its $949?

http://www.nolimitparts.com/prodinfo...ber=3GC-FT-500


Which is it? Heck these days $100 won't buy much but when you put a bunch of them together (as in 8 and a half) it will.

How about a package deal Rob? We buy the R&P kit, Rear shock relo kit, and the Adj. long panhard rod kit so we get the ride benefits of the full No Limit effort.

[Custom 68]

Yea I wish I would have bought when he had his "pre-production" sale.

[robnolimit]

forum members get a 10% discount, we round it off at 849. Merry Christmas all year

[68GMCCustom]

Is there a code we enter for the 10% or do orders need to be placed over the phone to get the discount?

[mmiddle]

Rob, you are right. It is in my plan, just have lots of needs.

[robnolimit]

Originally Posted by 68GMCCustom

Is there a code we enter for the 10% or do orders need to be placed over the phone to get the discount?

Best to call for now, our new web site is still being worked on, it will have a spot for forum discounts soon.

[Steve-W]

Just read through the entire thread in one go.. I am inspired, but I live on the other side of the atlantic, would you be able to get me a shipping price for the $849 set to the Netherlands? My 69 C10 is stock with the small adjustment of a complete frontmember swap with a 73 so I could have diskbrakers i.s.o. drums..

[AspecialZ]

Hey Rob, have you had anyone who Z'd the frame on their 70s c10 and had issues setting up the steering? I have one in the shop now that has a 3.5" z'd frame

[robnolimit]

I think it would be OK. the steering UJ angle would be less, thats good. Maybe rack /tie-rod clearance under the rail, depending on how it was 'Z'd'.

[kitsbeach]

Wondering if I can still run 15" steelie wheels with this setup.? Brother's site says 17" wheels minimum.

How about if I went with the No Limit wide ride.? Could I run my 15's then.?

[Mondo]

I have 15in chrome rally's and didn't have an issue.

[akdg87]

Is there a manual rack that will work in place of the power unit?

[Skinsman]

Originally Posted by akdg87

Is there a manual rack that will work in place of the power unit?

Hi Rob,
I am very interested in switching my 71 C10 over to rack & pinion steering - but I do not want power steering. Do you have the option of supplying a manual rack & pinion within this kit?

[robnolimit]

Our WideRide has 12" brakes - So, "most" 15" wheels will fit. We have had a few that we had to grind a little off of the caliper and the weld inside the wheel.

15" wheels should not be a problem with the rack and OE crossmember.

We do not make this for a manual rack.

[akdg87]

Where does one order a replacement rack for the 67-72 c10? Mine leaks a little bit

[robnolimit]

The racks start out as late model chevy truck (like 2000-2006 1/2 ton 2WD) We cut off the OE passenger side mount, and rotate the passenger side housing 180*. To fit up with the rotated housing, the formed pressure hard lines are custom made to fit. All of the consumable parts, boots, seals.... are from the 2000+chev 1/2T - Now, if it leaking with normal use, we will warranty it N/C. Just call for an RA # and send it in. We'll chevk it out and service it and send it back to you.

[aggie91]

I used the No Limit rack with a LM7 (genIII engine) in my son's 82. I built my own engine mounts to set it back and the bottom of the LSA oil pan about 1/4" higher than the bottom of the front crossmember. I did not do a section of the crossmember, but raised it in the frame 1.5". I had to use 3 u-joints in the steering shaft with a support bearing, but it all worked really well.

[61superman]

alright I'm sold then rack n pinion it is

[Bobt]

robnolimit,
I have installed an 84 Chevy cross member in my 46 Chevy short school bus. I narrowed the cross member 5 1/8". To ensure I didn't screw around with the geometry of the suspension the only thing I modified was the cross member. Do you have a rack & mount that will work for the narrower cross member? THANKS

[G8DAN]

Hey Rob,

Is this R&P available for 73-87 C10s?

[G8DAN]

Has anyone installed one of these on a squarebody? I know the title shows 63-87 but I called No limit and they said its not for squarebody trucks. I just want to make sure. i was very interested in this unit.