Project: Sano 67 - Page 8 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Spray-Bomb · 07-12-2008, 01:02 AM

Ok guys & gals, here it is Sano

This is a project that I have wanted to do for a long time now & I have finally gotten around to starting it

Its a 67 GMC short fleet... The meaning of Sano is something very clean, smooth, & sweet

So thats what this truck is all about, being Sano

The truck will be black, bagged, A/C, & lots of other stuff that makes it nice
But a lot of the other detail are still up in the air

Just to recap & show yall the "real pics" of the trucks progress so far

This is what i started with, a bare un touched 67 frame

My old 67 GMC Kilroy

The bed off my dads 72

The engine out of a wrecked 78

Spray-Bomb · 07-12-2008, 01:02 AM

Modded my valve cover to make it less ugly, since I wont be running the EGR junk

Cleaned the engine

Spray-Bomb · 07-12-2008, 01:02 AM

Cleaned the frame

Swapped out the front X-member to a disc brake X-member

Then I got the engine painted

Spray-Bomb · 07-12-2008, 01:02 AM

We tore into my rear axle to see what gear were in it & such, but found out it was in pretty bad shape inside
So I went out back & pulled a 9" pord

Ah the carnage

Then Cleaned it

Spray-Bomb · 07-12-2008, 01:03 AM

Started painting the frame

Michael (Select) came over & helped me pull the trans out of my old 84 & got it all cleaned up
Then I painted it & dropped it & the engine in the frame

Spray-Bomb · 07-12-2008, 01:03 AM

Got my valve cover painted & put on

Swapped out the spring perches onto the pord 9"

Spray-Bomb · 07-12-2008, 01:03 AM

Finished painting the frame

Went to the board meet in Houston & picked up my wheels (thanks for picking them up Raland)

Withe the pord rear & the offset of these wheels, the wheels will be perfectly centered in the fender wells

Spray-Bomb · 07-12-2008, 01:03 AM

Got the bags in the rear (still need to build the notch)

Then I got the E-brake mounted & partially hooked up

And this is about as far as I have made it

67_C-30 · 07-12-2008, 01:10 AM

What's up with the posty's? Are you bookmarking slots for more pics??

Nice looking start! I can't wait to see it all together! I'm glad you're moment of squarebody insanity is over!

Spray-Bomb · 07-12-2008, 01:54 AM

Yeah, I went back & filled them in

I'll be glad when I have the money to start working on it again
I have a lot of ideas for this & its been changing a lot lately, so Im not sure of all the details

67_C-30 · 07-12-2008, 02:05 AM

I swear that Detroit Green makes any engine look heavy duty!

Looks good!

rod86 · 07-12-2008, 02:07 AM

looking good

Spray-Bomb · 07-12-2008, 02:08 AM

I like the color myself

joe231 · 07-12-2008, 11:18 AM

looks nice!
glad to finally see it

what vehicle are those black steelies from?

stingrayorangekrate · 07-12-2008, 11:39 AM

looking good man

Spray-Bomb · 07-12-2008, 09:27 PM

Dodge charger & magnums & stuff
They are the base model wheel & the spares

17" X 7 (IIRC)

joe231 · 07-12-2008, 10:23 PM

cool, those are 5 on 5?
look sweet!!

Bob 68327 · 07-12-2008, 10:28 PM

Looks Good !!! Glad to see it finally !!! LOL Bob

BACKYARD88 · 07-12-2008, 11:41 PM

Cool

Spray-Bomb · 07-13-2008, 12:47 AM

No they are dodge / ford pattern... I believe 5 on 4 3/4

joe231 · 07-13-2008, 01:09 AM

oh, ok
thanks

texanidiot25 · 07-14-2008, 05:50 PM

Man that engine looks nice with out all the emessions crap all over it. lol

Lookin' good so far. So, is the zip ties permanent?

Spray-Bomb · 07-14-2008, 09:51 PM

Yeah man, those are structural

**FRENCHBLUE72** · 07-14-2008, 11:25 PM

Imma sure shes gonna be bad azz when done.. Love that green too.

samwise68 · 07-15-2008, 10:26 AM

Lookin' good man! Glad to see another project going together.

I just hope that the intake/exhaust on that integral head stays together for ya - they have a nasty tendancy to crack.

Aside from that, keep at 'er. You'll have a truck to drive sooner or later!

-Sam.

07-12-2008, 01:02 AM	#176
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: Project: Sano 67 Ok guys & gals, here it is Sano This is a project that I have wanted to do for a long time now & I have finally gotten around to starting it Its a 67 GMC short fleet... The meaning of Sano is something very clean, smooth, & sweet So thats what this truck is all about, being Sano The truck will be black, bagged, A/C, & lots of other stuff that makes it nice But a lot of the other detail are still up in the air Just to recap & show yall the "real pics" of the trucks progress so far This is what i started with, a bare un touched 67 frame My old 67 GMC Kilroy The bed off my dads 72 The engine out of a wrecked 78 __________________ Just not low enough... ----------------------------- Sinister Killer

07-12-2008, 01:02 AM	#177
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: Project: Sano 67 Modded my valve cover to make it less ugly, since I wont be running the EGR junk Cleaned the engine __________________ Just not low enough... ----------------------------- Sinister Killer Last edited by Spray-Bomb; 07-12-2008 at 01:10 AM.

07-12-2008, 01:02 AM	#178
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: Project: Sano 67 Cleaned the frame Swapped out the front X-member to a disc brake X-member Then I got the engine painted __________________ Just not low enough... ----------------------------- Sinister Killer Last edited by Spray-Bomb; 07-12-2008 at 01:16 AM.

07-12-2008, 01:02 AM	#179
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: Project: Sano 67 We tore into my rear axle to see what gear were in it & such, but found out it was in pretty bad shape inside So I went out back & pulled a 9" pord Ah the carnage Then Cleaned it __________________ Just not low enough... ----------------------------- Sinister Killer Last edited by Spray-Bomb; 07-12-2008 at 01:26 AM.

07-12-2008, 01:03 AM	#180
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: Project: Sano 67 Started painting the frame Michael (Select) came over & helped me pull the trans out of my old 84 & got it all cleaned up Then I painted it & dropped it & the engine in the frame __________________ Just not low enough... ----------------------------- Sinister Killer Last edited by Spray-Bomb; 07-12-2008 at 01:40 AM.

07-12-2008, 01:03 AM	#181
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: Project: Sano 67 Got my valve cover painted & put on Swapped out the spring perches onto the pord 9" __________________ Just not low enough... ----------------------------- Sinister Killer Last edited by Spray-Bomb; 07-12-2008 at 01:43 AM.

07-12-2008, 01:03 AM	#182
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: Project: Sano 67 Finished painting the frame Went to the board meet in Houston & picked up my wheels (thanks for picking them up Raland) Withe the pord rear & the offset of these wheels, the wheels will be perfectly centered in the fender wells __________________ Just not low enough... ----------------------------- Sinister Killer Last edited by Spray-Bomb; 07-12-2008 at 01:47 AM.

07-12-2008, 01:03 AM	#183
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: Project: Sano 67 Got the bags in the rear (still need to build the notch) Then I got the E-brake mounted & partially hooked up And this is about as far as I have made it __________________ Just not low enough... ----------------------------- Sinister Killer Last edited by Spray-Bomb; 07-12-2008 at 01:52 AM.

07-12-2008, 01:10 AM	#184
67_C-30 I have a radical idea! Join Date: Jan 2005 Location: Sweet Home Alabama! Posts: 6,513	Re: Project: Sano 67 What's up with the posty's? Are you bookmarking slots for more pics?? Nice looking start! I can't wait to see it all together! I'm glad you're moment of squarebody insanity is over! __________________ '67 C-30 Dually Pickup 6.2 Turbo Diesel, NP435 ‘72 C-10 SWB , 350 4bbl, TH350 '69 C-10 SWB , 250 L6, 3 OTT '69 GMC C3500, dump truck, 351 V6, NP435 '84 M1009 CUCV Military Blazer 67 C-30 Turbodiesel build thread http://67-72chevytrucks.com/vboard/s...d.php?t=254096 My trucks http://s226.photobucket.com/albums/d...ediafilter=all Member of the 1-Ton Club!

07-12-2008, 01:54 AM	#185
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: Project: Sano 67 Yeah, I went back & filled them in I'll be glad when I have the money to start working on it again I have a lot of ideas for this & its been changing a lot lately, so Im not sure of all the details __________________ Just not low enough... ----------------------------- Sinister Killer

07-12-2008, 02:05 AM	#186
67_C-30 I have a radical idea! Join Date: Jan 2005 Location: Sweet Home Alabama! Posts: 6,513	Re: Project: Sano 67 I swear that Detroit Green makes any engine look heavy duty! Looks good! __________________ '67 C-30 Dually Pickup 6.2 Turbo Diesel, NP435 ‘72 C-10 SWB , 350 4bbl, TH350 '69 C-10 SWB , 250 L6, 3 OTT '69 GMC C3500, dump truck, 351 V6, NP435 '84 M1009 CUCV Military Blazer 67 C-30 Turbodiesel build thread http://67-72chevytrucks.com/vboard/s...d.php?t=254096 My trucks http://s226.photobucket.com/albums/d...ediafilter=all Member of the 1-Ton Club!

07-12-2008, 02:07 AM	#187
rod86 great southern land Join Date: Feb 2008 Location: perth - australia Posts: 6,194	Re: Project: Sano 67 looking good __________________ rod 86 chevy c10 silverado

07-12-2008, 02:08 AM	#188
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: Project: Sano 67 I like the color myself __________________ Just not low enough... ----------------------------- Sinister Killer

07-12-2008, 11:18 AM	#189
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: Project: Sano 67 looks nice! glad to finally see it what vehicle are those black steelies from? __________________ *CHEVY ONLY*

07-12-2008, 11:39 AM	#190
stingrayorangekrate Registered User Join Date: Mar 2007 Location: Wake Forest, Nc Posts: 155	Re: Project: Sano 67 looking good man



Register or Log In To remove these advertisements.

07-12-2008, 09:27 PM	#191
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: Project: Sano 67 Dodge charger & magnums & stuff They are the base model wheel & the spares 17" X 7 (IIRC) __________________ Just not low enough... ----------------------------- Sinister Killer

07-12-2008, 10:23 PM	#192
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: Project: Sano 67 cool, those are 5 on 5? look sweet!! __________________ *CHEVY ONLY*

07-12-2008, 10:28 PM	#193
Bob 68327 72 Chevelle Club Join Date: Jun 2007 Location: Newton , Iowa Posts: 2,052	Re: Project: Sano 67 Looks Good !!! Glad to see it finally !!! LOL Bob __________________ I Have The Right To Remain Silent,But Lack The Ability 1972 Chevelle ... Mine 2006 Trailblazer... Hers 2002 Buick century ... Kids 2002 K1500 Z-71 EXT CAB ... Daily Driver 2005 Rockwood Roo ... For Camping 1974 Harley-Davidson XLH Sportster 84'' stroker

07-12-2008, 11:41 PM	#194
BACKYARD88 On the fast track to nowhere.. Join Date: May 2006 Location: Splendora, Texas Posts: 5,316	Re: Project: Sano 67 Cool __________________ -Mike Owen- Support the board here! 71 Chevy short fleet build thread Double D Norwood, Houston, Cecilia, Jackson, Monroe and counting

07-13-2008, 12:47 AM	#195
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: Project: Sano 67 No they are dodge / ford pattern... I believe 5 on 4 3/4 __________________ Just not low enough... ----------------------------- Sinister Killer

07-13-2008, 01:09 AM	#196
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: Project: Sano 67 oh, ok thanks __________________ *CHEVY ONLY*

07-14-2008, 05:50 PM	#197
texanidiot25 Eat My Rust Join Date: Jan 2007 Location: Cypress, Texas Posts: 3,362	Re: Project: Sano 67 Man that engine looks nice with out all the emessions crap all over it. lol Lookin' good so far. So, is the zip ties permanent?

07-14-2008, 09:51 PM	#198
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: Project: Sano 67 Yeah man, those are structural __________________ Just not low enough... ----------------------------- Sinister Killer

07-14-2008, 11:25 PM	#199
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,590	Re: Project: Sano 67 Imma sure shes gonna be bad azz when done.. Love that green too. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

Register or Log In To remove these advertisements.