KS Parting a original 71 chevy C10 now - Page 8 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 03-10-2015, 09:08 PM

Jeremy, the one on the ground is sold. I have others out there, outer and inner $100. they will not be perfect but not beat all up either. I'll get your other parts shipped out this week

Paul, yes I'm fine, but the door was bent bad, we got it straightened so its closes. Its a $2500 door. I just got back from a 4 1/2 round trip to pick up another truck. I'm going to to try to catch with everyone Wed and Thurs night

Thanks Randy

**med.bronze** · 03-10-2015, 09:26 PM

Sounds good Randy, I'll take them both then. Sounds like you're busy so no hurry. Sending pm for payment info. Thanks- Ryan

72K20super · 03-10-2015, 09:58 PM

Randy, thanks for the response i will make sure that they can come pick up the parts in a timely manner before i say yes to the trim and grill. I do not need perfect by any means it is a daily driver i talk pride in though. No hurry on the shipping of the other parts if you are busy. Thanks for your quick response Jeremy

teeitup · 03-11-2015, 08:40 AM

Ryan, pics and I will pm you today

Jeremy, I will try to get pics tonight

Thanks Randy

**med.bronze** · 03-11-2015, 09:32 AM

Payment sent, thanks again Randy!

teeitup · 03-11-2015, 09:42 PM

mailing out Thurs Ryan, Thanks Randy

teeitup · 03-11-2015, 09:43 PM

Jeremy, here are the 2 best outers I have, some issues

teeitup · 03-11-2015, 09:44 PM

And the other outer and best inner, the cracks in inner are hard to see when mounted

72K20super · 03-12-2015, 02:59 AM

Randy thanks for the pictures. The second one appears to be in good shape other than that lower driver side damage. I would take better of the two sets, the outer and lower in the second set of pictures. Let me know how much thanks Jeremy.

teeitup · 03-12-2015, 08:14 AM

Jeremy, $105 for the 2nd outer grill and the inner. Let me know if you get your friend to pick it up for you. Thanks Randy

Jake1971 · 03-12-2015, 12:20 PM

Quote:

Originally Posted by Jake1971

Hey Randy, I will take the rear overload springs setup if it gets to me. Add them to my pile and LMK total to 78602.
Also still looking for these parts for my '71 c10:
Center seat belt (blue),
Blue steel door panels,
Blue (522?) carpet, low hump,
Black rubber mat, low hump,
Passenger front outer fender,
Bedside gas doors from the ochre truck.
Thanks again!

Payment sent for overloads $80 shipped, $12 door panel and $20 Gas doors, horns, shipping on this stuff is $21. Pay pal fees $6, total for all $139. Thanks again, Randy!

hold24 · 03-12-2015, 01:17 PM

What about the add on ac unit inside cab only? I could maybe use some parts for that...

teeitup · 03-12-2015, 04:13 PM

THANK YOU Paul!!!!

Hold24, sorry its not any good, its in my stash to be used for parts on my personal setup

Thanks Randy

teeitup · 03-12-2015, 04:27 PM

Bed was sold complete, Thanks

scotts72heavyhalf · 03-12-2015, 10:22 PM

Would you sell the passenger side valve cover? Looking for one that's not dented.

Thanks, shipping to Oregon 97013

gs1969 · 03-12-2015, 10:28 PM

Randy,
I PM you, about the cab, but forgot to ask about leaf spring rear axel (5) lug, any luck ??
Gary

1low68 · 03-12-2015, 10:56 PM

How much for exhaust manifolds shipped to 90807. Let me know thanks

teeitup · 03-13-2015, 08:06 AM

Scott, I'll sell it, $12 plus shipping

Gary, yes truck with the leaf spring rear is here

1low68, I still have some out there $40 plus shipping for a pair

Thanks Randy

shawno72 · 03-13-2015, 09:10 AM

Interested in the ash tray, cig lighter and 2 of the little clips that hold the door and window crank handles on

Also, if you have it, the same color radio delete plate and clips? Thanks Randy.

**WIDESIDE72** · 03-13-2015, 09:22 AM

Payment sent for choke housing thermostat cover rod and clip and heater control mounting screws

Btw do you happen to have a pair of overload springs for a coil rear truck?

**19702wdc10** · 03-13-2015, 12:35 PM

Randy,

I am looking for either a 15x6 or 15x8 6 lug 4 nub rim.

Thanks
Joe

teeitup · 03-13-2015, 12:51 PM

Shawn, I have the ash tray and the clips, none of the other stuff right now

Steve, no other over loads right now. I'll mail out your other stuff Mon

Joe, sorry no 6 lugs right now,

Thanks Randy

teeitup · 03-13-2015, 01:22 PM

1low68, good shape, one stud has been replaced

shawno72 · 03-13-2015, 01:28 PM

Quote:

Originally Posted by teeitup

Shawn, I have the ash tray and the clips, none of the other stuff right now

Thanks Randy

Ok Randy. Let me know how much shipped to 95240. Thank you

1low68 · 03-13-2015, 02:27 PM

PM me the shipping cost to 90807 on those manifolds

03-10-2015, 09:08 PM	#176
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a original 71 chevy C10 now Jeremy, the one on the ground is sold. I have others out there, outer and inner $100. they will not be perfect but not beat all up either. I'll get your other parts shipped out this week Paul, yes I'm fine, but the door was bent bad, we got it straightened so its closes. Its a $2500 door. I just got back from a 4 1/2 round trip to pick up another truck. I'm going to to try to catch with everyone Wed and Thurs night Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-10-2015, 09:26 PM	#177
med.bronze Senior Member Join Date: Dec 2011 Location: Laurel, Mt. Posts: 522	Re: Parting a original 71 chevy C10 now Sounds good Randy, I'll take them both then. Sounds like you're busy so no hurry. Sending pm for payment info. Thanks- Ryan __________________ 1972 Cheyenne Super 10 SWB,bucket seats,dealer cruise,tilt,tac,a/c,shoulder belts, 350/350 1971 K-10 Custom Deluxe 1971 K-10 Custom

03-10-2015, 09:58 PM	#178
72K20super Registered User Join Date: Feb 2013 Location: Fort Collins, CO Posts: 26	Re: Parting a original 71 chevy C10 now Randy, thanks for the response i will make sure that they can come pick up the parts in a timely manner before i say yes to the trim and grill. I do not need perfect by any means it is a daily driver i talk pride in though. No hurry on the shipping of the other parts if you are busy. Thanks for your quick response Jeremy

03-11-2015, 08:40 AM	#179
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a original 71 chevy C10 now Ryan, pics and I will pm you today Jeremy, I will try to get pics tonight Thanks Randy Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-11-2015, 09:32 AM	#180
med.bronze Senior Member Join Date: Dec 2011 Location: Laurel, Mt. Posts: 522	Re: Parting a original 71 chevy C10 now Payment sent, thanks again Randy! __________________ 1972 Cheyenne Super 10 SWB,bucket seats,dealer cruise,tilt,tac,a/c,shoulder belts, 350/350 1971 K-10 Custom Deluxe 1971 K-10 Custom

03-11-2015, 09:42 PM	#181
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a original 71 chevy C10 now mailing out Thurs Ryan, Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-11-2015, 09:43 PM	#182
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a original 71 chevy C10 now Jeremy, here are the 2 best outers I have, some issues Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-11-2015, 09:44 PM	#183
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a original 71 chevy C10 now And the other outer and best inner, the cracks in inner are hard to see when mounted Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-12-2015, 02:59 AM	#184
72K20super Registered User Join Date: Feb 2013 Location: Fort Collins, CO Posts: 26	Re: Parting a original 71 chevy C10 now Randy thanks for the pictures. The second one appears to be in good shape other than that lower driver side damage. I would take better of the two sets, the outer and lower in the second set of pictures. Let me know how much thanks Jeremy.

03-12-2015, 08:14 AM	#185
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a original 71 chevy C10 now Jeremy, $105 for the 2nd outer grill and the inner. Let me know if you get your friend to pick it up for you. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-12-2015, 01:17 PM	#187
hold24 Registered User Join Date: Sep 2012 Location: Canton Ga Posts: 200	Re: Parting a original 71 chevy C10 now What about the add on ac unit inside cab only? I could maybe use some parts for that...

03-12-2015, 04:13 PM	#188
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a original 71 chevy C10 now THANK YOU Paul!!!! Hold24, sorry its not any good, its in my stash to be used for parts on my personal setup Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-12-2015, 04:27 PM	#189
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a original 71 chevy C10 now Bed was sold complete, Thanks __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-12-2015, 10:22 PM	#190
scotts72heavyhalf Registered User Join Date: Aug 2007 Location: Sandy, Oregon Posts: 1,551	Re: Parting a original 71 chevy C10 now Would you sell the passenger side valve cover? Looking for one that's not dented. Thanks, shipping to Oregon 97013 __________________ Scotts72C10

03-12-2015, 10:28 PM	#191
gs1969 Registered User Join Date: Jun 2007 Location: Leavenworth Posts: 72	Re: Parting a original 71 chevy C10 now Randy, I PM you, about the cab, but forgot to ask about leaf spring rear axel (5) lug, any luck ?? Gary



Register or Log In To remove these advertisements.

03-12-2015, 10:56 PM	#192
1low68 Registered User Join Date: Oct 2003 Location: Long Beach Posts: 50	Re: Parting a original 71 chevy C10 now How much for exhaust manifolds shipped to 90807. Let me know thanks

03-13-2015, 08:06 AM	#193
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a original 71 chevy C10 now Scott, I'll sell it, $12 plus shipping Gary, yes truck with the leaf spring rear is here 1low68, I still have some out there $40 plus shipping for a pair Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-13-2015, 09:10 AM	#194
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: Parting a original 71 chevy C10 now Interested in the ash tray, cig lighter and 2 of the little clips that hold the door and window crank handles on Also, if you have it, the same color radio delete plate and clips? Thanks Randy. __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

03-13-2015, 09:22 AM	#195
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,494	Re: Parting a original 71 chevy C10 now Payment sent for choke housing thermostat cover rod and clip and heater control mounting screws Btw do you happen to have a pair of overload springs for a coil rear truck?

03-13-2015, 12:35 PM	#196
19702wdc10 Active Member Join Date: Jun 2013 Location: Locust Grove, Virginia Posts: 101	Re: Parting a original 71 chevy C10 now Randy, I am looking for either a 15x6 or 15x8 6 lug 4 nub rim. Thanks Joe

03-13-2015, 12:51 PM	#197
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a original 71 chevy C10 now Shawn, I have the ash tray and the clips, none of the other stuff right now Steve, no other over loads right now. I'll mail out your other stuff Mon Joe, sorry no 6 lugs right now, Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-13-2015, 01:22 PM	#198
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a original 71 chevy C10 now 1low68, good shape, one stud has been replaced Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-13-2015, 02:27 PM	#200
1low68 Registered User Join Date: Oct 2003 Location: Long Beach Posts: 50	Re: Parting a original 71 chevy C10 now PM me the shipping cost to 90807 on those manifolds

Register or Log In To remove these advertisements.