The Blue Goose - Page 84 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

oldblue1968chevy · 11-03-2011, 11:22 PM

installed my beat up bent up passenger side taillight bezel today, i was gonna try to put perfect trim on, but what the crap it matches the rest of the truck beat up trim looks bettter from 20 ft than obvious big holes

called wes at classic heartbeat, gotta wait on money from bank to paypal to go thru and i'll order some clips! and try to adj door and hunt more trim!

RICKY-ANY UPDATES ON THE TIRE HOLDER?

oldblue1968chevy · 11-06-2011, 04:55 PM

vacumn guage, any tuner folks know if this is good or not.

Im tyring to adj/fine tune the air mix screws

oldblue1968chevy · 11-06-2011, 04:56 PM

this is at idle, if i speed it up to about 1000rpm is smooths out..

litew8 · 11-07-2011, 02:19 AM

Quote:

Originally Posted by oldblue1968chevy

vacumn guage, any tuner folks know if this is good or not.

Im tyring to adj/fine tune the air mix screws

Not sure if it's any good or not, but it looks like a piece of aviation equip.

oldblue1968chevy · 11-09-2011, 06:55 PM

Looking for lower grille trim and a new grille my dumb sister decided to borrow dads truck and ko'd my grill with the ball on dads truck....

KILLED my perfect 67 68 grille

litew8 · 11-09-2011, 07:50 PM

sorry to hear John

, got any pics?

BMERDOC · 11-09-2011, 08:37 PM

Quote:

Originally Posted by oldblue1968chevy

vacumn guage, any tuner folks know if this is good or not.

Im tyring to adj/fine tune the air mix screws

Its not that easy to read but even at idle it should be more staedy than that. Can you take a clearer picture?

Hubscrub · 11-09-2011, 10:46 PM

Quote:

Originally Posted by oldblue1968chevy

Looking for lower grille trim and a new grille my dumb sister decided to borrow dads truck and ko'd my grill with the ball on dads truck....

KILLED my perfect 67 68 grille

Butt kicking in order

those balls are nothing but trouble i remove mine every time i'm done with it.

Pics?

67chevy1series · 11-09-2011, 11:16 PM

Quote:

Originally Posted by oldblue1968chevy

Looking for lower grille trim and a new grille my dumb sister decided to borrow dads truck and ko'd my grill with the ball on dads truck....

KILLED my perfect 67 68 grille

i want pictures! that sucks so bad!

oldblue1968chevy · 11-10-2011, 12:24 AM

its not that bad..loadin pix now

oldblue1968chevy · 11-10-2011, 12:27 AM

Parts list as of right now (i think i can fix the actual grille just 1 big crease..)

lower grille hoop
lower rivited in piece of grille whatever its called

litew8 · 11-10-2011, 12:30 AM

Could have been worse! Lucky!

oldblue1968chevy · 11-10-2011, 12:32 AM

not that bad but too bad its not a stranger so i could have money not outta my pocket for repairs

thinking about repainting grille while im at it, ps the blue is rustoleum

oldblue1968chevy · 11-10-2011, 12:33 AM

yikes, dunno how my arm is in that shot

oldblue1968chevy · 11-10-2011, 12:34 AM

mo carnage

67chevy1series · 11-10-2011, 12:35 AM

stupids sisters... they always mess up truck stuff mine mess things up for me to..

litew8 · 11-10-2011, 12:44 AM

Bumper and emblem saved!

oldblue1968chevy · 11-10-2011, 01:21 AM

Yeah, I wished it was something like the bumper, id be a chance to get a matching chrome front to match rear....

it was wierd, right before i heard the 'CRUNCH' i was plotting to put a ziptie on dads driveshaft before sis drove his truck

then CRUNCH I run to the window to look out, shes pulling forward and looking at me

Trying to fix a dipstick leak and got a copper oil pressure line today. Havent checked to see if its still leaking. Oh and put some new plugs in and upped the gap from .35 to .45

oldblue1968chevy · 11-10-2011, 01:31 AM

JUST ORDERED THE CLIPS FOR THE REST OF THE DRIVERS SIDE TRIM!

Gotta find a funny 'door end clip' one of mine are missing, and align my door

67chevy1series · 11-10-2011, 02:07 AM

Quote:

Originally Posted by oldblue1968chevy

JUST ORDERED THE CLIPS FOR THE REST OF THE DRIVERS SIDE TRIM!

Gotta find a funny 'door end clip' one of mine are missing, and align my door

slick copper · 11-10-2011, 07:54 AM

That sucks about the grille. Looks like it can be beat out though. The Goose run better with the plug gap change or can u tell a difference? Pretty amazing how close that rustoleum paint is to the original.

oldblue1968chevy · 11-10-2011, 12:08 PM

Mmm, maybe a lil better acceleration. My manual called for HEI 350 to be gapped 45 so thats what I gapped the new plugs

Yeah the bed was painted 1 thin coat for 10 bucks lol

ps its not original, po painted over nice patina

oldblue1968chevy · 11-10-2011, 08:44 PM

think ifixed dipstick leak...gonna swap copper line for plastic tomorow and try to work on the big dent

50bomb · 11-10-2011, 08:47 PM

your lucky I have to replace both mine later cause someone drilled screw to hold them in place

drewskiren · 11-11-2011, 01:42 AM

Sorry for being off topic, but who is the cutie in your avatar? We need more pics of cuties and our trucks!

11-03-2011, 11:22 PM	#2076
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: The Blue Goose installed my beat up bent up passenger side taillight bezel today, i was gonna try to put perfect trim on, but what the crap it matches the rest of the truck beat up trim looks bettter from 20 ft than obvious big holes called wes at classic heartbeat, gotta wait on money from bank to paypal to go thru and i'll order some clips! and try to adj door and hunt more trim! RICKY-ANY UPDATES ON THE TIRE HOLDER? __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

11-06-2011, 04:55 PM	#2077
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: The Blue Goose vacumn guage, any tuner folks know if this is good or not. Im tyring to adj/fine tune the air mix screws __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

11-06-2011, 04:56 PM	#2078
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: The Blue Goose this is at idle, if i speed it up to about 1000rpm is smooths out.. __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

11-09-2011, 06:55 PM	#2080
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: The Blue Goose Looking for lower grille trim and a new grille my dumb sister decided to borrow dads truck and ko'd my grill with the ball on dads truck.... KILLED my perfect 67 68 grille __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

11-09-2011, 07:50 PM	#2081
litew8 Registered User Join Date: Jul 2011 Location: Des Moines, Iowa Posts: 3,016	Re: The Blue Goose sorry to hear John , got any pics? __________________ project: "my happy mess"

11-10-2011, 12:24 AM	#2085
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: The Blue Goose its not that bad..loadin pix now __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

11-10-2011, 12:27 AM	#2086
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: The Blue Goose Parts list as of right now (i think i can fix the actual grille just 1 big crease..) lower grille hoop lower rivited in piece of grille whatever its called Attached Images __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

11-10-2011, 12:30 AM	#2087
litew8 Registered User Join Date: Jul 2011 Location: Des Moines, Iowa Posts: 3,016	Re: The Blue Goose Could have been worse! Lucky! __________________ project: "my happy mess"

11-10-2011, 12:32 AM	#2088
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: The Blue Goose not that bad but too bad its not a stranger so i could have money not outta my pocket for repairs thinking about repainting grille while im at it, ps the blue is rustoleum Attached Images __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

11-10-2011, 12:33 AM	#2089
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: The Blue Goose yikes, dunno how my arm is in that shot __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

11-10-2011, 12:34 AM	#2090
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: The Blue Goose mo carnage Attached Images __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

11-10-2011, 12:35 AM	#2091
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: The Blue Goose stupids sisters... they always mess up truck stuff mine mess things up for me to..

11-10-2011, 12:44 AM	#2092
litew8 Registered User Join Date: Jul 2011 Location: Des Moines, Iowa Posts: 3,016	Re: The Blue Goose Bumper and emblem saved! __________________ project: "my happy mess"

11-10-2011, 01:21 AM	#2093
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: The Blue Goose Yeah, I wished it was something like the bumper, id be a chance to get a matching chrome front to match rear.... it was wierd, right before i heard the 'CRUNCH' i was plotting to put a ziptie on dads driveshaft before sis drove his truck then CRUNCH I run to the window to look out, shes pulling forward and looking at me Trying to fix a dipstick leak and got a copper oil pressure line today. Havent checked to see if its still leaking. Oh and put some new plugs in and upped the gap from .35 to .45 __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

11-10-2011, 01:31 AM	#2094
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: The Blue Goose JUST ORDERED THE CLIPS FOR THE REST OF THE DRIVERS SIDE TRIM! Gotta find a funny 'door end clip' one of mine are missing, and align my door __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4



Register or Log In To remove these advertisements.

11-10-2011, 07:54 AM	#2096
slick copper Registered User Join Date: Aug 2010 Location: Richmond, KY Posts: 1,137	Re: The Blue Goose That sucks about the grille. Looks like it can be beat out though. The Goose run better with the plug gap change or can u tell a difference? Pretty amazing how close that rustoleum paint is to the original. __________________ Raymond 1967 Chevy C/10 LWB Custom Optioned "big window truck" AKA Copper. My build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=452594 The story of how I got the truck:http://67-72chevytrucks.com/vboard/s...d.php?t=450939 Ole Smokey Build Thread 2002 Silverado 8.1L Crew Cab SOLDhttp://67-72chevytrucks.com/vboard/s...d.php?t=618402

11-10-2011, 12:08 PM	#2097
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: The Blue Goose Mmm, maybe a lil better acceleration. My manual called for HEI 350 to be gapped 45 so thats what I gapped the new plugs Yeah the bed was painted 1 thin coat for 10 bucks lol ps its not original, po painted over nice patina __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

11-10-2011, 08:44 PM	#2098
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: The Blue Goose think ifixed dipstick leak...gonna swap copper line for plastic tomorow and try to work on the big dent __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

11-10-2011, 08:47 PM	#2099
50bomb Registered User Join Date: Jul 2010 Location: Hemet,Ca Posts: 1,502	Re: The Blue Goose your lucky I have to replace both mine later cause someone drilled screw to hold them in place

11-11-2011, 01:42 AM	#2100
drewskiren Lucky Teter at the wheel Join Date: Aug 2009 Location: Memphis, TN Posts: 1,896	Re: The Blue Goose Sorry for being off topic, but who is the cutie in your avatar? We need more pics of cuties and our trucks! __________________ Drew YOUNG FRANKENSTEIN (Finished with MAJOR Surgery - IT'S ALIVE!!!) The Bride is currently under the knife!

Register or Log In To remove these advertisements.