Header Solution - Page 9 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

weircc · 03-27-2011, 10:14 PM

thanks for the help

Scott T. · 03-28-2011, 12:46 AM

Hmmm...same problem here Weircc. Just installed mine today..BB/w 3'' ball
collector. After the initial shock

...I thought I could solve the problem
by ordering the ECE trans mount. But now, after seeing Hart Rod's with the
mount installed, I don't believe that will fix the problem (could be wrong)
I only have about an inch and a half before the ball of the header touches
the tranny mt. The headers sit just low enough that it is questionable if the
ECE mt. will fix the issue. I have attached a few pics so maybe someone
can help with a solution. Only thing I know to do at this point is to have a
custom trany mt. made

Scott T. · 03-28-2011, 12:51 AM

By the way...this is a great set of headers. Just hope we can get around
this fitment issue without to much hassel.

weircc · 03-28-2011, 06:13 AM

hmm i was thinking mine had a little more room but never went back out too see last night i think the ece cross member will probably get it though

boonedogs72 · 04-08-2011, 12:31 PM

whats the chances of another group buy???

**Jokers69** · 04-08-2011, 12:45 PM

If there is enough interest I can talk to dan and see. Last time he wanted 10 set sold to meet the requirements. I will talk to him and let you know.

coast2coast · 04-08-2011, 02:51 PM

Oh sure, right after I just ordered mine.

tac106842 · 05-03-2011, 12:21 PM

Subscribed to thread to see if and when Dan will do another group buy!

**Jokers69** · 05-03-2011, 04:09 PM

Group buy price for Clear Image Automotive headers are as follows:

List prices

SBC mild steel bare $550.00
SBC mild steel coated $865.00
SBC stainless steel $975.00

BBC mild steel bare $575.00
BBC mild steel coated $925.00

SBC mild steel
5 or more $75.00 off list price
10 or more $150.00 off list price

SBC stainless steel
5 or more $50.00 off list price
10 or more $100.00 off list price

BBC mild steel
5 or more $75.00 off list price
10 or more $150.00 off list price

one set of transision flanges/adaptors from 3.5" to 3" with ball and socket hook ups $50.00

New ceramic coating list prices
list on SBC headers $315.00
list on BBC headers $350.00

We will need 5 sets of each to make the minimum order. So thats 5 sets of sbc and 5 sets of bbc. The sbc headers can be mixed mild steel and stainless.

Thanks Steve 425-251-0210

elf w/capital T · 05-03-2011, 08:51 PM

holy yowza batman those looks sick!!

boonedogs72 · 05-05-2011, 11:03 AM

thats one hell of a deal.

CHADRACKBRO · 05-23-2011, 05:19 PM

Steve, can you please put me down for a set of sbc stainless steal headers! Thank you

**Jokers69** · 05-24-2011, 01:43 PM

I'll put you down 1 set sbc stainless.

CHADRACKBRO · 06-08-2011, 12:44 PM

Well It doesn't really seem like too many people are interested. I will wait a little longer but I need to do something with my exhaust soon to get my truck on the road.

**Jokers69** · 06-13-2011, 11:04 AM

We will end the group buy at the end of the week. So if you guys would like a set at a discount price now is the time to place or orders.

CHADRACKBRO · 06-13-2011, 11:49 AM

I would still like to be in on a group buy if it happens. Thanks!
Posted via Mobile Device

**passthebuck** · 07-06-2011, 08:35 PM

I'm saving up my nickels so I can get a stainless set of smallblock headers w/ the ball mount! If any group buys/sales come up, let me know!

**Jokers69** · 07-28-2011, 04:50 PM

Headers on sale now lowest price. We are offering them at low price for a very limited time. Price is $335.00 sbc mild steel, $675.00 sbc stainless, and $395.00 bbc mild steel. This may be final sale at this price so order while you can. If you would like to order Give us a call @ 425-251-0210 m-f pst Thanks Steve

POPO1984 · 07-28-2011, 08:24 PM

Uh oh
Posted via Mobile Device

weircc · 07-28-2011, 08:48 PM

guys this is a killer deal these headers fit great and look great

CHADRACKBRO · 07-28-2011, 08:51 PM

Finally the deal I've been waiting for!!!
Posted via Mobile Device

POPO1984 · 07-29-2011, 09:30 AM

Has anyone run these Headers on a sbc with angled plugs

m6z · 08-02-2011, 05:51 PM

headers look great. might need a set for a big block somtime in the future.

Dano69c10 · 08-02-2011, 06:01 PM

Did the fitment problem get corrected, or do the headers still interfere with the stock tranny crossmember?

**DaHos** · 12-13-2011, 07:08 PM

Quote:

Originally Posted by Dano69c10

Did the fitment problem get corrected, or do the headers still interfere with the stock tranny crossmember?

I too am still scratchin my head on that one.......pg 10 ????????

BB guys how did you do it?

03-27-2011, 10:14 PM	#1
weircc Registered User Join Date: Dec 2008 Location: richmond, MO Posts: 794	Re: Header Solution thanks for the help

03-28-2011, 12:46 AM	#2
Scott T. Registered User Join Date: Dec 2009 Location: Mt. Juliet, Tn. Posts: 38	Re: Header Solution Hmmm...same problem here Weircc. Just installed mine today..BB/w 3'' ball collector. After the initial shock ...I thought I could solve the problem by ordering the ECE trans mount. But now, after seeing Hart Rod's with the mount installed, I don't believe that will fix the problem (could be wrong) I only have about an inch and a half before the ball of the header touches the tranny mt. The headers sit just low enough that it is questionable if the ECE mt. will fix the issue. I have attached a few pics so maybe someone can help with a solution. Only thing I know to do at this point is to have a custom trany mt. made Attached Images

03-28-2011, 12:51 AM	#3
Scott T. Registered User Join Date: Dec 2009 Location: Mt. Juliet, Tn. Posts: 38	Re: Header Solution By the way...this is a great set of headers. Just hope we can get around this fitment issue without to much hassel.

03-28-2011, 06:13 AM	#4
weircc Registered User Join Date: Dec 2008 Location: richmond, MO Posts: 794	Re: Header Solution hmm i was thinking mine had a little more room but never went back out too see last night i think the ece cross member will probably get it though

04-08-2011, 12:31 PM	#5
boonedogs72 Registered User Join Date: Apr 2005 Location: redding ca Posts: 1,438	Re: Header Solution whats the chances of another group buy???

04-08-2011, 12:45 PM	#6
Jokers69 Active Member Join Date: Aug 2008 Location: Washington Posts: 147	Re: Header Solution If there is enough interest I can talk to dan and see. Last time he wanted 10 set sold to meet the requirements. I will talk to him and let you know.

04-08-2011, 02:51 PM	#7
coast2coast Registered User Join Date: Oct 2006 Location: Strafford Missouri Posts: 217	Re: Header Solution Oh sure, right after I just ordered mine.

05-03-2011, 12:21 PM	#8
tac106842 Registered User Join Date: Mar 2010 Location: Van Buren, ohio Posts: 69	Re: Header Solution Subscribed to thread to see if and when Dan will do another group buy!

05-03-2011, 04:09 PM	#9
Jokers69 Active Member Join Date: Aug 2008 Location: Washington Posts: 147	Re: Header Solution Group buy price for Clear Image Automotive headers are as follows: List prices SBC mild steel bare $550.00 SBC mild steel coated $865.00 SBC stainless steel $975.00 BBC mild steel bare $575.00 BBC mild steel coated $925.00 SBC mild steel 5 or more $75.00 off list price 10 or more $150.00 off list price SBC stainless steel 5 or more $50.00 off list price 10 or more $100.00 off list price BBC mild steel 5 or more $75.00 off list price 10 or more $150.00 off list price one set of transision flanges/adaptors from 3.5" to 3" with ball and socket hook ups $50.00 New ceramic coating list prices list on SBC headers $315.00 list on BBC headers $350.00 We will need 5 sets of each to make the minimum order. So thats 5 sets of sbc and 5 sets of bbc. The sbc headers can be mixed mild steel and stainless. Thanks Steve 425-251-0210

05-03-2011, 08:51 PM	#10
elf w/capital T Registered User Join Date: Feb 2011 Location: North Carolina Posts: 993	Re: Header Solution holy yowza batman those looks sick!!

05-05-2011, 11:03 AM	#11
boonedogs72 Registered User Join Date: Apr 2005 Location: redding ca Posts: 1,438	Re: Header Solution thats one hell of a deal.

05-23-2011, 05:19 PM	#12
CHADRACKBRO Registered User Join Date: Jan 2011 Location: SoCal Posts: 22	Re: Header Solution Steve, can you please put me down for a set of sbc stainless steal headers! Thank you

05-24-2011, 01:43 PM	#13
Jokers69 Active Member Join Date: Aug 2008 Location: Washington Posts: 147	Re: Header Solution I'll put you down 1 set sbc stainless.

06-08-2011, 12:44 PM	#14
CHADRACKBRO Registered User Join Date: Jan 2011 Location: SoCal Posts: 22	Re: Header Solution Well It doesn't really seem like too many people are interested. I will wait a little longer but I need to do something with my exhaust soon to get my truck on the road.

06-13-2011, 11:04 AM	#15
Jokers69 Active Member Join Date: Aug 2008 Location: Washington Posts: 147	Re: Header Solution We will end the group buy at the end of the week. So if you guys would like a set at a discount price now is the time to place or orders.



Register or Log In To remove these advertisements.

06-13-2011, 11:49 AM	#16
CHADRACKBRO Registered User Join Date: Jan 2011 Location: SoCal Posts: 22	Re: Header Solution I would still like to be in on a group buy if it happens. Thanks! Posted via Mobile Device

07-06-2011, 08:35 PM	#17
passthebuck Sisyphus was my mentor! Join Date: Sep 2002 Location: Carleton Place, Ontario CANADA Posts: 984	Re: Header Solution I'm saving up my nickels so I can get a stainless set of smallblock headers w/ the ball mount! If any group buys/sales come up, let me know! __________________ passthebuck #5642 -TWO 1967 GMC 910's. One with L6/3-on-the tree and the other with 355 w/435hp & a 700r4. -a 2013 Honda Civic as my "sensible" car

07-28-2011, 04:50 PM	#18
Jokers69 Active Member Join Date: Aug 2008 Location: Washington Posts: 147	Re: Header Solution Headers on sale now lowest price. We are offering them at low price for a very limited time. Price is $335.00 sbc mild steel, $675.00 sbc stainless, and $395.00 bbc mild steel. This may be final sale at this price so order while you can. If you would like to order Give us a call @ 425-251-0210 m-f pst Thanks Steve

07-28-2011, 08:24 PM	#19
POPO1984 Registered User Join Date: Jul 2009 Location: Houston, Tx Posts: 1,133	Re: Header Solution Uh oh Posted via Mobile Device __________________ 1972 SWB Medium Olive South Houston Instagram: Antbish84

07-28-2011, 08:48 PM	#20
weircc Registered User Join Date: Dec 2008 Location: richmond, MO Posts: 794	Re: Header Solution guys this is a killer deal these headers fit great and look great __________________ 1971 rs camaro under the knife ls3 6 speed swap 1970 396 big block shorty fleet 67 clone 2010 rs/ss camaro

07-28-2011, 08:51 PM	#21
CHADRACKBRO Registered User Join Date: Jan 2011 Location: SoCal Posts: 22	Re: Header Solution Finally the deal I've been waiting for!!! Posted via Mobile Device

07-29-2011, 09:30 AM	#22
POPO1984 Registered User Join Date: Jul 2009 Location: Houston, Tx Posts: 1,133	Re: Header Solution Has anyone run these Headers on a sbc with angled plugs __________________ 1972 SWB Medium Olive South Houston Instagram: Antbish84

08-02-2011, 05:51 PM	#23
m6z Registered User Join Date: Aug 2008 Location: Pittsburg, KS Posts: 2,466	Re: Header Solution headers look great. might need a set for a big block somtime in the future. __________________ Doug Looking for a 67-72 short bed driver.....

08-02-2011, 06:01 PM	#24
Dano69c10 Senior Member Join Date: Jan 2005 Location: Ontario, Kali Posts: 2,427	Re: Header Solution Did the fitment problem get corrected, or do the headers still interfere with the stock tranny crossmember? __________________ '69 Fleet It ain't yours, if you didn't build it!

Register or Log In To remove these advertisements.