KS Labor Day 67-72 parts special!!!!!!!! - Page 9 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 09-06-2011, 12:05 AM

moooooooooooooooooooooooooooooooooooooooooo

teeitup · 09-06-2011, 12:06 AM

pics of best spare carrier, slight bow

MUDSLT · 09-06-2011, 12:41 AM

do you have a complete wiring harness for a 69 swb?

Shaun1162 · 09-06-2011, 08:26 AM

Quote:

Originally Posted by teeitup

Shaun, I'll have to look on bowtie, I have one guy ahead of you on one of those. I have some driver quality door sills $12 a pair plus shipping

Thanks Randy

OK, sounds good! I'm pretty sure I saw a bowtie in the pics, so figured I'd ask. If you can't find one I'll take the door sills anyways.

Forgot to ask, but do you have any green seat belt retractors?

Thanks, Shaun

Whittaker · 09-06-2011, 11:21 AM

I saw a couple drive shafts what do they fit? Are they just the rear part or?

The big block exhaust manifolds?

A high hump transmission cover/tunnel.?

I'm also in need of the big block extra long/wide upper radiator hold downs.

Joe Blaze · 09-06-2011, 11:46 AM

Looking for the chrome and black body moldings for all around a '71 Blazer, shipped to 11530. How does it look for that?
Posted via Mobile Device

Joe Blaze · 09-06-2011, 11:50 AM

How about plastic backs of front bucket seats for a '71 Blazer?
Posted via Mobile Device

yfs200p · 09-06-2011, 12:50 PM

Randy-
Payment sent for the PS brackets and the upper Rad. Pipe

Thanks so much

bocates · 09-06-2011, 12:59 PM

I have a 1972 LWB C10 w-Cheyenne package. On the passenger side of the bed, in front of the rear tire is a compartment. I think it is the tool box for the truck, at least it was. The door or cover is missing and the actual compartment is gone and I just have a hole there right now. Any chance you have one among all these other goodies of yours?

Thanks

Bobby

Whittaker · 09-06-2011, 02:31 PM

Also I saw an HEI distributor or two and any really good small block Q-jets or small Holley, Edelbrock for my 307.

I also am swapping from a 3 speed on the tree manual to an automatic 700 R4 or TH 350. Do you have a TH 350 with drive shaft its for my 72 Rusty Suburban. A long bed truck is the same length I think.

My 68 sub I need a drive shaft or parts. It has the larger diameter spline slip shaft where the carrier bearing rides and the cup shaped pieces that surround the carrier bearing. But the slip part has a yolk or yoke that the screw on cap is messed up.

teeitup · 09-06-2011, 04:26 PM

MUDSLT, sorry none right now

Shaun1162, I'll look on emblem and get pics fo door sills

Whittaker, drive shafts are out of blazer 4x4. I have a set of Bb exhaust manifolds with air intake holes $50 plus shipping for them. I have one BB high hump for $70 shipped. I'll have to look on 4 core rad holders. I have a few HEI's $15 plus shipping each. A couple 4 barrel carbs, they may need rebuilt though. No other driveshafts right now.

Joe Blaze, sorry none of that right now

YFS200P, Got it, I'll get boxed and shipped out

bocates, Bobby, I have the compartment but no door, I can get pic of it.

Thanks Randy

teeitup · 09-06-2011, 06:21 PM

Pics for Whitaker

teeitup · 09-06-2011, 06:29 PM

here are the carbs and hei's

teeitup · 09-06-2011, 06:30 PM

door sills, some surface rust, on dent in 2nd pic at end

teeitup · 09-06-2011, 06:32 PM

Double Stack, the emblems are 71-72 grill emblems. Here is a set of back up lens $12 shipped. Thanks Randy

**jimer1964** · 09-06-2011, 06:32 PM

hi randy looking for a dust cover for man.trans.4x4?

teeitup · 09-06-2011, 06:33 PM

Jim, sorry none right now. Thanks Randy

teeitup · 09-06-2011, 06:34 PM

Frenchblue, sorry the tag brackets is bent up and bunch of holes in it. Thanks Randy

Double Stack · 09-06-2011, 08:39 PM

Sold! Can I paypal?

Thank you.

**D.PASSMORE** · 09-06-2011, 08:46 PM

Randy, Did Frank get the Z-bar? Is it for a V8?
Thanks David

72cheyenneman · 09-06-2011, 08:47 PM

Randy! I've been very patient. I see you posting pictures and selling other parts but I'm still waiting for pictures of the spark plug heat shields and the 2-loop retainer spark plug wires for each side of the motor (not the ones on the back). If you don't have them let me know and I'll look elsewhere. Thanks, Casey

bocates · 09-06-2011, 08:56 PM

Thanks Randy. Would you pls send a pic of the toolbox and a price plus shipping for zip 77386? Thanks again

Bobby

**southern parts** · 09-06-2011, 08:59 PM

hey Randy, condition and price on the 2 big block heat shields?

teeitup · 09-06-2011, 09:34 PM

Double Stack, pm'd you info

David, he didn't buy it he said it wasn't for a V8, not sure whats it for

Casey, sorry its very hard to keep up with all this, I looked at motors today at my work and they do not have the small brackets your wanting, sorry

Bocates, Bobby, here are pics

Southern Parts, one is real good the other has some missing because of rust

Thanks Randy

teeitup · 09-06-2011, 09:36 PM

Bobby here are your pics, I need to take the screws out and get rest of bedside off it

09-06-2011, 12:05 AM	#201
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Labor Day 67-72 parts special!!!!!!!! moooooooooooooooooooooooooooooooooooooooooo Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-06-2011, 12:06 AM	#202
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Labor Day 67-72 parts special!!!!!!!! pics of best spare carrier, slight bow Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-06-2011, 12:41 AM	#203
MUDSLT Registered User Join Date: Aug 2011 Location: Houston TX Posts: 184	Re: Labor Day 67-72 parts special!!!!!!!! do you have a complete wiring harness for a 69 swb?

09-06-2011, 11:21 AM	#205
Whittaker Registered User Join Date: Feb 2011 Location: Champaign, Illinois Posts: 110	Re: Labor Day 67-72 parts special!!!!!!!! I saw a couple drive shafts what do they fit? Are they just the rear part or? The big block exhaust manifolds? A high hump transmission cover/tunnel.? I'm also in need of the big block extra long/wide upper radiator hold downs.

09-06-2011, 11:46 AM	#206
Joe Blaze Registered User Join Date: Aug 2011 Location: Long Island, NY Posts: 154	Re: Labor Day 67-72 parts special!!!!!!!! Looking for the chrome and black body moldings for all around a '71 Blazer, shipped to 11530. How does it look for that? Posted via Mobile Device

09-06-2011, 11:50 AM	#207
Joe Blaze Registered User Join Date: Aug 2011 Location: Long Island, NY Posts: 154	Re: Labor Day 67-72 parts special!!!!!!!! How about plastic backs of front bucket seats for a '71 Blazer? Posted via Mobile Device

09-06-2011, 12:50 PM	#208
yfs200p E.H.F.D Engine #2 Join Date: Feb 2003 Location: East Hampton, NY Long Island Posts: 916	Re: Labor Day 67-72 parts special!!!!!!!! Randy- Payment sent for the PS brackets and the upper Rad. Pipe Thanks so much __________________ -NICK '72 K10 SWB Fleetside. Avocado Highlander 350-4speed-NP205 Frame Off Re-Creation '89 GMC V3500 C/C Flatbed Plow Truck 454/SM465/Np205 '15 Chevy 2500HD CCSB High Country Duramax '22 Tahoe Premier Duramax

09-06-2011, 12:59 PM	#209
bocates Registered User Join Date: Aug 2011 Location: Spring, Texas Posts: 5	Re: Labor Day 67-72 parts special!!!!!!!! I have a 1972 LWB C10 w-Cheyenne package. On the passenger side of the bed, in front of the rear tire is a compartment. I think it is the tool box for the truck, at least it was. The door or cover is missing and the actual compartment is gone and I just have a hole there right now. Any chance you have one among all these other goodies of yours? Thanks Bobby

09-06-2011, 02:31 PM	#210
Whittaker Registered User Join Date: Feb 2011 Location: Champaign, Illinois Posts: 110	Re: Labor Day 67-72 parts special!!!!!!!! Also I saw an HEI distributor or two and any really good small block Q-jets or small Holley, Edelbrock for my 307. I also am swapping from a 3 speed on the tree manual to an automatic 700 R4 or TH 350. Do you have a TH 350 with drive shaft its for my 72 Rusty Suburban. A long bed truck is the same length I think. My 68 sub I need a drive shaft or parts. It has the larger diameter spline slip shaft where the carrier bearing rides and the cup shaped pieces that surround the carrier bearing. But the slip part has a yolk or yoke that the screw on cap is messed up.

09-06-2011, 04:26 PM	#211
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Labor Day 67-72 parts special!!!!!!!! MUDSLT, sorry none right now Shaun1162, I'll look on emblem and get pics fo door sills Whittaker, drive shafts are out of blazer 4x4. I have a set of Bb exhaust manifolds with air intake holes $50 plus shipping for them. I have one BB high hump for $70 shipped. I'll have to look on 4 core rad holders. I have a few HEI's $15 plus shipping each. A couple 4 barrel carbs, they may need rebuilt though. No other driveshafts right now. Joe Blaze, sorry none of that right now YFS200P, Got it, I'll get boxed and shipped out bocates, Bobby, I have the compartment but no door, I can get pic of it. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-06-2011, 06:21 PM	#212
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Labor Day 67-72 parts special!!!!!!!! Pics for Whitaker Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-06-2011, 06:29 PM	#213
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Labor Day 67-72 parts special!!!!!!!! here are the carbs and hei's Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-06-2011, 06:30 PM	#214
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Labor Day 67-72 parts special!!!!!!!! door sills, some surface rust, on dent in 2nd pic at end Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-06-2011, 06:32 PM	#215
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Labor Day 67-72 parts special!!!!!!!! Double Stack, the emblems are 71-72 grill emblems. Here is a set of back up lens $12 shipped. Thanks Randy Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-06-2011, 06:32 PM	#216
jimer1964 Senior Member Join Date: Jan 2007 Location: bowmansville,pa Posts: 1,679	Re: Labor Day 67-72 parts special!!!!!!!! hi randy looking for a dust cover for man.trans.4x4?



Register or Log In To remove these advertisements.

09-06-2011, 06:33 PM	#217
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Labor Day 67-72 parts special!!!!!!!! Jim, sorry none right now. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-06-2011, 06:34 PM	#218
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Labor Day 67-72 parts special!!!!!!!! Frenchblue, sorry the tag brackets is bent up and bunch of holes in it. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-06-2011, 08:39 PM	#219
Double Stack Registered User Join Date: Aug 2011 Location: Oregon Posts: 82	Re: Labor Day 67-72 parts special!!!!!!!! Sold! Can I paypal? Thank you.

09-06-2011, 08:46 PM	#220
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,055	Re: Labor Day 67-72 parts special!!!!!!!! Randy, Did Frank get the Z-bar? Is it for a V8? Thanks David __________________ DAVID PASSMORE ST AUGUSTINE ,FL ZIP 32084 '71 SWB K/10 CUSTOM DELUXE (Chili) '72 BLAZER K/5 Muscle Truck (Mule) '72 LWB K/20 CHEYENNE (Blackie)

09-06-2011, 08:47 PM	#221
72cheyenneman Registered User Join Date: Nov 2009 Location: New Orleans, Louisiana Posts: 610	Re: Labor Day 67-72 parts special!!!!!!!! Randy! I've been very patient. I see you posting pictures and selling other parts but I'm still waiting for pictures of the spark plug heat shields and the 2-loop retainer spark plug wires for each side of the motor (not the ones on the back). If you don't have them let me know and I'll look elsewhere. Thanks, Casey

09-06-2011, 08:56 PM	#222
bocates Registered User Join Date: Aug 2011 Location: Spring, Texas Posts: 5	Re: Labor Day 67-72 parts special!!!!!!!! Thanks Randy. Would you pls send a pic of the toolbox and a price plus shipping for zip 77386? Thanks again Bobby

09-06-2011, 08:59 PM	#223
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,470	Re: Labor Day 67-72 parts special!!!!!!!! hey Randy, condition and price on the 2 big block heat shields?

09-06-2011, 09:34 PM	#224
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Labor Day 67-72 parts special!!!!!!!! Double Stack, pm'd you info David, he didn't buy it he said it wasn't for a V8, not sure whats it for Casey, sorry its very hard to keep up with all this, I looked at motors today at my work and they do not have the small brackets your wanting, sorry Bocates, Bobby, here are pics Southern Parts, one is real good the other has some missing because of rust Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-06-2011, 09:36 PM	#225
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Labor Day 67-72 parts special!!!!!!!! Bobby here are your pics, I need to take the screws out and get rest of bedside off it Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

Register or Log In To remove these advertisements.