CA 65 GMC parts, Lots of them - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Greg B · 10-06-2017, 02:21 PM

Complete ground up build on a very clean low mile truck that was the previous owners project results in many very clean and many cases new old parts.

I will break these in to groups and will be happy to answer any questions asked

Everything needed to convert your 1/2 ton short bed truck to a 4 Speed transmission including sheet metal for the hump $1100.00 plus shipping

Full assembly complete consisting of;

Bell housing

Flywheel,

Pressure plate, new

Clutch, new

Clutch linkage including frame pivot and peddle linkage

New sheet metal. as well as the original

2 piece drive shaft (New)

pictures

Name: IMG_4289.jpg
Views: 615
Size: 56.7 KB

Name: IMG_4289.jpg
Views: 615
Size: 56.7 KB

Name: IMG_4288.jpg
Views: 610
Size: 92.3 KB

Name: IMG_4276.jpg
Views: 613
Size: 51.9 KB

Name: IMG_4270.jpg
Views: 607
Size: 50.3 KB

Name: IMG_4269.jpg
Views: 613
Size: 101.8 KB

Greg B · 10-06-2017, 02:27 PM

Misc stuff

Original Battery tray with no rust or rot $75.00

Name: IMG_4271.jpg
Views: 605
Size: 70.7 KB

heater,blower complete. non leaking heater core $100.

Power steering control module 1965 works but could use a new seal kit $50.00

Steering column complete for 3 Speed Manual(Aftermarket Wheel included) $65.00

New in box rear control arms for Chevrolet C10 $old

Name: IMG_4274.jpg
Views: 605
Size: 101.5 KB

Name: IMG_4274.jpg
Views: 605
Size: 101.5 KB

Name: IMG_4293.jpg
Views: 603
Size: 54.9 KB

Name: IMG_4280.jpg
Views: 605
Size: 35.5 KB

Greg B · 10-06-2017, 02:29 PM

Fuel Tank, in Cab high capacity, no rust working sending unit. $200.00

Name: IMG_4294.jpg
Views: 601
Size: 46.0 KB

Ennehazrad · 10-06-2017, 05:34 PM

Are you selling these items? If so, how much for the high hump shipped to 92509?

Greg B · 10-06-2017, 07:45 PM

Quote:

Originally Posted by Ennehazrad

Are you selling these items? If so, how much for the high hump shipped to 92509?

Would rather sell the whole 4 speed conversion as a set, but if no one is interested in that I will probably go 50 bucks for that tin plus shipping

**PGSigns** · 10-06-2017, 08:24 PM

You need to post prices on this stuff.
Jimmy

Ennehazrad · 10-06-2017, 11:46 PM

Well, if no one is interested in the set, then I'll take the hump tin for that price plus shipping. Just DM the details.

**aotte1** · 10-07-2017, 01:25 AM

What year is the power steering control valve, condition, and price.

Les

kerber63 · 10-07-2017, 02:52 AM

Manufacturer of the c-not h kit? Pics and price?

mibo · 10-07-2017, 10:34 AM

I am interested in those control arms
I have sent a pm
Mike

**The Rocknrod** · 10-07-2017, 10:40 AM

Hi Greg, Great Parts! As a member I appreciate you posting them for sale.
However you might want to read this:
"Sellers Code of Conduct 67-72chevytrucks.com
I. All for sale or trade ads must include the price..."
http://67-72chevytrucks.com/vboard/a...nt.php?f=7&a=8
Before someone comes on and ruins your plans.

Greg B · 10-07-2017, 01:52 PM

Quote:

Originally Posted by The Rocknrod

Hi Greg, Great Parts! As a member I appreciate you posting them for sale.
However you might want to read this:
"Sellers Code of Conduct 67-72chevytrucks.com
I. All for sale or trade ads must include the price..."
http://67-72chevytrucks.com/vboard/a...nt.php?f=7&a=8
Before someone comes on and ruins your plans.

OOPS sorry, I am kind of new to this, I am sorry. Prices added.

mibo · 10-07-2017, 02:03 PM

I would like the rear control arms
I will send a pm
Thanks mike

Greg B · 10-07-2017, 02:56 PM

more stuff

C notch plates from CPP $old

stock radiator, no leaks looks pretty clean $90.00

later model 12 bolt rear end with 5 lug axles. Must Pick up or arrange your own shipping. $125.00

kerber63 · 10-07-2017, 03:44 PM

How much for shipping c-notch plates to 97304?

Greg B · 10-08-2017, 08:17 AM

Quote:

Originally Posted by kerber63

How much for shipping c-notch plates to 97304?

kerber63, I'll get back to you today with those numbers, thank you for replying to my post.

65truckowner · 10-08-2017, 09:41 AM

How much shipped for the radiator to 72560

**aotte1** · 10-08-2017, 09:46 AM

I will take the control valve and
Radiator if the 4 core HD, pending
Shipping cost to 42701.
Please provide shipping costs.

Thanks
Les

**aotte1** · 10-08-2017, 09:55 AM

The HD radiator top tank will be 3 1/2 inches wide. FYI

Les

65truckowner · 10-08-2017, 08:30 PM

I thought I was first in line for the radiator??

Greg B · 10-08-2017, 11:06 PM

Quote:

Originally Posted by 65truckowner

I thought I was first in line for the radiator??

65truckowner you are first in line for the radiator. I'll have shipping info tomorrow for you, thank you.

Les if 65truckowner does't take the radiator I will notify you.

Thanks for being patient guy's.

Greg

65truckowner · 10-09-2017, 07:44 AM

No problem thanks.

sambrutay · 10-09-2017, 09:56 AM

C-Notch sold?

kerber63 · 10-09-2017, 01:12 PM

I'm waiting on price info for the c-notch. Consider me first in line, pending.

Greg B · 10-09-2017, 05:33 PM

[ATTACH]

Name: 20171009_142301.jpg
Views: 450
Size: 48.7 KB

Name: IMG_4311.jpg
Views: 419
Size: 70.7 KB

Name: IMG_4312.jpg
Views: 451
Size: 72.9 KB

[/ATTACH]

My apologies for the confusion as it was brought to my attention this radiator is not an HD. Core size is measured in the above picture.

65truckowner is first in line for it if he still wants it.

10-06-2017, 02:21 PM	#1
Greg B Registered User Join Date: Aug 2017 Location: Salinas Posts: 34	65 GMC parts, Lots of them Prices added Complete ground up build on a very clean low mile truck that was the previous owners project results in many very clean and many cases new old parts. I will break these in to groups and will be happy to answer any questions asked Everything needed to convert your 1/2 ton short bed truck to a 4 Speed transmission including sheet metal for the hump $1100.00 plus shipping Full assembly complete consisting of; Bell housing Flywheel, Pressure plate, new Clutch, new Clutch linkage including frame pivot and peddle linkage New sheet metal. as well as the original 2 piece drive shaft (New) pictures Last edited by Greg B; 10-07-2017 at 01:50 PM.

10-06-2017, 02:27 PM	#2
Greg B Registered User Join Date: Aug 2017 Location: Salinas Posts: 34	Re: 65 GMC parts, Lots of them Misc stuff Original Battery tray with no rust or rot $75.00 heater,blower complete. non leaking heater core $100. Power steering control module 1965 works but could use a new seal kit $50.00 Steering column complete for 3 Speed Manual(Aftermarket Wheel included) $65.00 New in box rear control arms for Chevrolet C10 $old Attached Images Last edited by Greg B; 10-12-2017 at 06:53 PM. Reason: item sold

10-06-2017, 02:29 PM	#3
Greg B Registered User Join Date: Aug 2017 Location: Salinas Posts: 34	Re: 65 GMC parts, Lots of them Fuel Tank, in Cab high capacity, no rust working sending unit. $200.00 Last edited by Greg B; 10-07-2017 at 01:48 PM.

10-06-2017, 05:34 PM	#4
Ennehazrad Registered User Join Date: Apr 2015 Location: Riverside, California Posts: 70	Re: 65 GMC parts, Lots of them Are you selling these items? If so, how much for the high hump shipped to 92509?

10-06-2017, 08:24 PM	#6
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Re: 65 GMC parts, Lots of them You need to post prices on this stuff. Jimmy __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic

10-06-2017, 11:46 PM	#7
Ennehazrad Registered User Join Date: Apr 2015 Location: Riverside, California Posts: 70	Re: 65 GMC parts, Lots of them Well, if no one is interested in the set, then I'll take the hump tin for that price plus shipping. Just DM the details.

10-07-2017, 01:25 AM	#8
aotte1 Senior Member Join Date: Oct 2013 Location: lousiville Ky Posts: 2,637	Re: 65 GMC parts, Lots of them What year is the power steering control valve, condition, and price. Les

10-07-2017, 02:52 AM	#9
kerber63 Registered User Join Date: Nov 2011 Location: Salem, OR Posts: 280	Re: 65 GMC parts, Lots of them Manufacturer of the c-not h kit? Pics and price? __________________ 1963 C10 short-wide Turbocharged 454, T56, 4.11 posi http://67-72chevytrucks.com/vboard/s...d.php?t=605408 1963 C10 suburban Unknown, unknown, 3.73 open http://67-72chevytrucks.com/vboard/s...d.php?t=622037

10-07-2017, 10:34 AM	#10
mibo Registered User Join Date: Nov 2015 Location: Washington, Iowa Posts: 27	Re: 65 GMC parts, Lots of them I am interested in those control arms I have sent a pm Mike

10-07-2017, 10:40 AM	#11
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: 65 GMC parts, Lots of them Hi Greg, Great Parts! As a member I appreciate you posting them for sale. However you might want to read this: "Sellers Code of Conduct 67-72chevytrucks.com I. All for sale or trade ads must include the price..." http://67-72chevytrucks.com/vboard/a...nt.php?f=7&a=8 Before someone comes on and ruins your plans. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

10-07-2017, 02:03 PM	#13
mibo Registered User Join Date: Nov 2015 Location: Washington, Iowa Posts: 27	Re: 65 GMC parts, Lots of them I would like the rear control arms I will send a pm Thanks mike

10-07-2017, 02:56 PM	#14
Greg B Registered User Join Date: Aug 2017 Location: Salinas Posts: 34	Re: 65 GMC parts, Lots of them more stuff C notch plates from CPP $old stock radiator, no leaks looks pretty clean $90.00 later model 12 bolt rear end with 5 lug axles. Must Pick up or arrange your own shipping. $125.00 Attached Images Last edited by Greg B; 10-12-2017 at 06:56 PM. Reason: Item sold

10-07-2017, 03:44 PM	#15
kerber63 Registered User Join Date: Nov 2011 Location: Salem, OR Posts: 280	Re: 65 GMC parts, Lots of them How much for shipping c-notch plates to 97304? __________________ 1963 C10 short-wide Turbocharged 454, T56, 4.11 posi http://67-72chevytrucks.com/vboard/s...d.php?t=605408 1963 C10 suburban Unknown, unknown, 3.73 open http://67-72chevytrucks.com/vboard/s...d.php?t=622037

10-08-2017, 09:41 AM	#17
65truckowner Registered User Join Date: Oct 2012 Location: mountain view arkansas Posts: 1,300	Re: 65 GMC parts, Lots of them How much shipped for the radiator to 72560 __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=548705

10-08-2017, 09:46 AM	#18
aotte1 Senior Member Join Date: Oct 2013 Location: lousiville Ky Posts: 2,637	Re: 65 GMC parts, Lots of them I will take the control valve and Radiator if the 4 core HD, pending Shipping cost to 42701. Please provide shipping costs. Thanks Les



Register or Log In To remove these advertisements.

10-08-2017, 09:55 AM	#19
aotte1 Senior Member Join Date: Oct 2013 Location: lousiville Ky Posts: 2,637	Re: 65 GMC parts, Lots of them The HD radiator top tank will be 3 1/2 inches wide. FYI Les

10-08-2017, 08:30 PM	#20
65truckowner Registered User Join Date: Oct 2012 Location: mountain view arkansas Posts: 1,300	Re: 65 GMC parts, Lots of them I thought I was first in line for the radiator?? __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=548705

10-09-2017, 07:44 AM	#22
65truckowner Registered User Join Date: Oct 2012 Location: mountain view arkansas Posts: 1,300	Re: 65 GMC parts, Lots of them No problem thanks. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=548705

10-09-2017, 09:56 AM	#23
sambrutay Registered User Join Date: Dec 2010 Location: Louisville KY Posts: 619	Re: 65 GMC parts, Lots of them C-Notch sold? __________________ Bruce 1964 C10 SWB #Junk 1979 C10 utility #cargopants (sold) 1971 GMC Sprint (sold) 1974 GMC Grande Sierra (sold)

10-09-2017, 01:12 PM	#24
kerber63 Registered User Join Date: Nov 2011 Location: Salem, OR Posts: 280	Re: 65 GMC parts, Lots of them I'm waiting on price info for the c-notch. Consider me first in line, pending. __________________ 1963 C10 short-wide Turbocharged 454, T56, 4.11 posi http://67-72chevytrucks.com/vboard/s...d.php?t=605408 1963 C10 suburban Unknown, unknown, 3.73 open http://67-72chevytrucks.com/vboard/s...d.php?t=622037

10-09-2017, 05:33 PM	#25
Greg B Registered User Join Date: Aug 2017 Location: Salinas Posts: 34	Re: 65 GMC parts, Lots of them [ATTACH] [/ATTACH] My apologies for the confusion as it was brought to my attention this radiator is not an HD. Core size is measured in the above picture. 65truckowner is first in line for it if he still wants it.

Register or Log In To remove these advertisements.