|
07-17-2021, 09:16 PM
|
#1 |
|
Registered User
Join Date: Oct 2020
Location: Hampshire, IL
Posts: 10
|
speedo cable length
Just installed a TH350 automatic in my 65 C10 and the stock speedometer cable does not appear long enough to reach the attachment point on the new trans. Has anyone else run into this problem, and if so, what was your solution? Do I need to order a longer cable? What cable would work and have the correct attaching collars? My truck came with a 3-on the tree standard trans and the cable reached that fine.
|
|
|
|
07-17-2021, 09:37 PM
|
#2 |
|
Senior Member
 Join Date: Sep 2020
Location: Kila mt
Posts: 437
|
Re: speedo cable length
Easy solution is to use a length of electrical wire, run it the route it needs to go, and measure that for your length…no guessing…I do it all the time
|
|
|
|
|
07-17-2021, 09:39 PM
|
#3 |
|
Registered User
Join Date: Oct 2020
Location: Hampshire, IL
Posts: 10
|
Re: speedo cable length
So then where do I order a new cable from?
|
|
|
|
|
07-17-2021, 09:58 PM
|
#4 |
|
Senior Member
Join Date: Sep 2020
Location: Kila mt
Posts: 437
|
Re: speedo cable length
Check with your local parts house or truck repair shop, after you have a length, there may be a “stock” one close to your measurements…some truck shops can make them up…..
|
|
|
|
|
07-18-2021, 12:03 AM
|
#5 |
|
Registered User
Join Date: Aug 2009
Location: Bowser
Posts: 13,512
|
Re: speedo cable length
|
|
|
|
|
07-18-2021, 05:25 AM
|
#6 |
|
Moderator
  
Join Date: Aug 2011
Location: China Spring, TX
Posts: 7,280
|
Re: speedo cable length
If yours was stock it was 60" inches, here is a 68" inch cable - https://www.classicparts.com/1939-72...info/24%2D524/
__________________
Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats? |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
