core support - The 1947 - Present Chevrolet & GMC Truck Message Board Network

64k10burb · 07-21-2021, 08:03 PM

Hi guys, I just picked up a '69 c-10 Fleet.

most of the passenger side core support mounts (for inner fender) are gone.

Can I make a pattern from the drivers side and flip it?

I'm not sure if they are the same on both sides.

Thanks in advance.

**LockDoc** · 07-21-2021, 08:59 PM

-
Moved it for you.

LockDoc

**truckster** · 07-21-2021, 10:52 PM

I'd replace it. But you should be able to just flip it if you really want to do some fabricating.

**Richard** · 07-22-2021, 12:28 AM

If you want to fix check this out https://67-72chevytrucks.com/vboard/...t=core+support Not sure if he has any left.

**dmjlambert** · 07-22-2021, 06:43 AM

That is also available as an aftermarket patch panel. I don't know if it's any good. https://www.brotherstrucks.com/1967-...tinfo/RSP72RH/

64k10burb · 07-22-2021, 11:58 AM

Quote:

Originally Posted by LockDoc

-
Moved it for you.

LockDoc

Thanks Doc!

Quote:

Originally Posted by truckster

I'd replace it. But you should be able to just flip it if you really want to do some fabricating.

OK, Thank you Truckster!

Quote:

Originally Posted by Richard

If you want to fix check this out https://67-72chevytrucks.com/vboard/...t=core+support Not sure if he has any left.

Great, thanks!

Quote:

Originally Posted by dmjlambert

That is also available as an aftermarket patch panel. I don't know if it's any good. https://www.brotherstrucks.com/1967-...tinfo/RSP72RH/

I hadn't seen that before, Thanks!

07-21-2021, 08:03 PM	#1
64k10burb Registered User Join Date: Jan 2016 Location: Mt. Solon, VA.--Byrdstown,TN Posts: 51	core support Hi guys, I just picked up a '69 c-10 Fleet. most of the passenger side core support mounts (for inner fender) are gone. Can I make a pattern from the drivers side and flip it? I'm not sure if they are the same on both sides. Thanks in advance. Attached Images __________________ Brian 1969 c-10 (soon to be short bed) 1982 Malibu Wagon-For sale -SOLD 1964 k10 suburban project 1947 Dodge chop top rescue project-SOLD Last edited by 64k10burb; 07-22-2021 at 11:55 AM.

07-21-2021, 08:59 PM	#2
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,319	Re: core support - Moved it for you. LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

07-21-2021, 10:52 PM	#3
truckster Senior Member Join Date: Jan 2001 Location: Orem, Utah Posts: 7,791	Re: core support I'd replace it. But you should be able to just flip it if you really want to do some fabricating. __________________ I have sworn upon the altar of God, eternal hostility against every form of tyranny over the mind of man. - Thomas Jefferson

07-22-2021, 12:28 AM	#4
Richard Senior Member Join Date: Dec 1999 Location: Southern California Posts: 2,692	Re: core support If you want to fix check this out https://67-72chevytrucks.com/vboard/...t=core+support Not sure if he has any left. __________________ Richard 1972 K10 Custom Deluxe SWB Fleetside My build https://67-72chevytrucks.com/vboard/...d.php?t=800746

07-22-2021, 06:43 AM	#5
dmjlambert Senior Member Join Date: Apr 2016 Location: Cypress, TX Posts: 3,561	Re: core support That is also available as an aftermarket patch panel. I don't know if it's any good. https://www.brotherstrucks.com/1967-...tinfo/RSP72RH/



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.