Fleetside bed measurement - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gottwake · 07-24-2021, 12:47 AM

-
Looking for the measurement to the outside of the wheel wells on a fleetside bed.
Actually, the rolled part that cant be cut (inner fender is welded)

**MySons68C20** · 07-24-2021, 01:49 PM

Measured my 68 C20 comes out to 78 1/4" plus or minus 1/4"
The bed is on the truck so kind of hard to be exact.
I measured between the wheel wells and then from the inner wheel well to the radius above the tire X 2.
Hope that help!

Blake

07-24-2021, 12:47 AM	#1
gottwake Registered User Join Date: Oct 2007 Location: Santa Clarita, CA Posts: 581	Fleetside bed measurement - Looking for the measurement to the outside of the wheel wells on a fleetside bed. Actually, the rolled part that cant be cut (inner fender is welded) Attached Images __________________ Blazer Project Last edited by LockDoc; 07-24-2021 at 10:27 AM.

07-24-2021, 01:49 PM	#2
MySons68C20 Senior Member Join Date: Sep 2014 Location: Wenatchee, Wa Posts: 897	Re: Fleetside bed measurement Measured my 68 C20 comes out to 78 1/4" plus or minus 1/4" The bed is on the truck so kind of hard to be exact. I measured between the wheel wells and then from the inner wheel well to the radius above the tire X 2. Hope that help! Blake



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.