TBI distributor in a 71 Blazer - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**A1971Blazer** · 08-29-2018, 10:50 AM

you can rotate it anywhere you like...then simply find TDC on #1 cylinder...look at where the rotor button is pointing and start #1 plug wire right there
also you can pull the distributor out and rotate it to where the connectors will be in the correct position...
it doesn't matter where the wires start as long as they are in time with the cylinders and have the correct firing order....
the only issue with moving the plug wires..... may be the length of the wires...making sure they reach the correct cylinder

08-29-2018, 10:50 AM	#2
A1971Blazer Senior Member Join Date: Nov 2013 Location: East Tennessee Posts: 2,111	Re: TBI distributor in a 71 Blazer you can rotate it anywhere you like...then simply find TDC on #1 cylinder...look at where the rotor button is pointing and start #1 plug wire right there also you can pull the distributor out and rotate it to where the connectors will be in the correct position... it doesn't matter where the wires start as long as they are in time with the cylinders and have the correct firing order.... the only issue with moving the plug wires..... may be the length of the wires...making sure they reach the correct cylinder __________________ 1967 C10 Step side 1968 C10 Step side 1970 Chevrolet K/5 Blazer 1972 Chevrolet K/5 Blazer .............



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.