The Old Man's Ride '66 C10 Shortbed Stepside - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Chiefjrock · 11-29-2011, 05:13 PM

Just wanted to post a few pix of the project I'm working on in SoCal. It's originally a TX truck which belonged to my father. As I recall, he was the 2nd owner and was pretty reluctant to have it shipped out West. It's taken a while to get her started...but the process is moving along fairly well.

66farmer · 11-29-2011, 08:36 PM

Looks good, always glad to see someone else working on a stepside

Alan's Classic · 11-30-2011, 12:57 AM

Welcome aboard, and it looks like you have made some great progress!!

**Captainfab** · 11-30-2011, 02:36 AM

Welcome to the forum

What are your plans for your truck?

Chiefjrock · 11-30-2011, 07:45 PM

Hey thanks everyone for the replies of encouragement. Plans for the truck are currently to keep it simple. I may lower it a few inches but other than paint, interior and newly rebuilt 350/350 combo; not much in the way of custom. I'll have more pix coming as I progress. Looking forward to sharing, as well as seeing some of the other builds and trucks in general. I love this site almost as much as I love my '66!!

**66ChevyMax** · 12-01-2011, 12:25 AM

Welcome, your'e off to a great start.

doobiebro · 12-01-2011, 01:08 AM

Quote:

Originally Posted by Chiefjrock

Just wanted to post a few pix of the project I'm working on in SoCal. It's originally a TX truck which belonged to my father. As I recall, he was the 2nd owner and was pretty reluctant to have it shipped out West. It's taken a while to get her started...but the process is moving along fairly well.

Nice..another cool stepside. My project also came from TX..

Chiefjrock · 12-01-2011, 12:27 PM

Very cool Doobiebro...I have some pix of the original truck before I started tearing it apart. Just need to get my pc up so I can retrieve them but hope to be posting more soon. Believe me ~ I know about waiting for a project to start. I waited about 8 yrs myself. Good Luck!

Chiefjrock · 12-01-2011, 02:56 PM

A couple more pix. Had some severe rust going on in the cab (go figure) and had to have a patch welded in. The other shot is of the bed getting prepped...this is the second bed on this truck. The first one fell victim to a wreck while it was parked right out in front of my dad's house.

Chiefjrock · 12-04-2011, 04:41 PM

Just a bit more progress on the paint for the 'Ol Girl. Still trying to find some older pix on my other pc but here are some recent ones...
I'm no mechanic and I have to get my carb and transmission linkage pieced back together. Anyone have any foolproof steps or pix on how to do this? I could hire a mechanic again but I'd like to save a few bucks doing it myself.
Thx!!

allaboutchevelles · 12-04-2011, 05:27 PM

Real nice work on the body. Looks very straight and slick. Keep up the good work and keep the pics coming!!

McMurphy · 12-04-2011, 11:19 PM

The soft black really makes that red in your cab stand out in the pics !!
Keep posting pics, I like the looks already!

And Yeah!! Another stepside

Chiefjrock · 12-04-2011, 11:35 PM

Thanks McMurphy, I keep an eye on your build as well...looking nice as well! The black and red you see are the primer/base coats. The idea is to have this baby shining in a gloss black and torch red interior. My cell phone camera is at the ready...stay tuned!

Chiefjrock · 12-07-2011, 08:38 PM

We put on some paint and clear coated the heck outta her! Got the new window seals/rubber put in and she looks great. Well, at least to me she does..lol.

I kept the original back window but the rest are new and a buddy of mine reworked the window cranks...man they work nice! Like a brand new truck, without the power windows of course. I'll get more pix in later but wanted to share what I had.

I need a mechanic in the San Diego area now...mine flaked and left me to have the transmission linkage and fuel setup needing to be installed. Anyone have any good step by step instructions or pix for me to go by?? Thx!

allaboutchevelles · 12-07-2011, 10:58 PM

wow, that paint job is looking slick!!! great job, loving the pics of progress!!

Chiefjrock · 07-21-2016, 11:33 AM

Well, life kinda took over and again, put my project on hold...but in March I was finally able to get her started once again. She is currently at Moonshine Metal Shaping in El Cajon, CA and in the final stages of completion.
Went with a 4" front and 4.5" rear drop (no bags...yet!) Also went with 18x8 Boss 338's all around. What a pain getting those fronts to fit. Disc brakes all around. A/C from Vintage Air, et, etc...
Just a few pics of where we are now.

**66ChevyMax** · 07-21-2016, 11:41 AM

I had the same problem with the Boss Wheels, keep moving forward looks great!

Chiefjrock · 07-21-2016, 11:45 AM

Thanks Craig.

Kyle@FTP · 07-21-2016, 12:40 PM

Nice little stepper. I love the red interior color.

Look up the c10 club of San Diego. A great group of guys that get together with their old trucks.

kyle

Chiefjrock · 07-21-2016, 12:51 PM

Thanks Kyle. Just signed up for Fred's email blasts...I may swing in and pick up some gear soon. Diggin' that logo on the shirts!

Chiefjrock · 08-19-2016, 12:26 PM

Got the ol girl into Old Iron Exhaust here in El Cajon, CA this week. Taylor hooked it up with a great Magnaflow 2.25" exhaust. Can't wait to fire her up!!

Chiefjrock · 02-07-2017, 11:37 AM

Finally got her on the road. A few bugs to workout but it sure does feel good being behind the wheel again. Haven't driven her since 2001!!
Have all the bedwood ready to install as well. Keep ya posted.

Vincenthdfan · 02-07-2017, 02:02 PM

I love the personalized license plate...nice touch.

aggie91 · 02-07-2017, 04:03 PM

Nice looking truck. Glad to see you get it on the road again.

shp4man · 02-07-2017, 04:26 PM

I'll look for you around town and at gear head events. Big Qualcomm swap meet coming up on the 24, 25 and 26.

11-29-2011, 05:13 PM	#1
Chiefjrock Registered User Join Date: May 2009 Location: San Diego, CA Posts: 29	The Old Man's Ride '66 C10 Shortbed Stepside Just wanted to post a few pix of the project I'm working on in SoCal. It's originally a TX truck which belonged to my father. As I recall, he was the 2nd owner and was pretty reluctant to have it shipped out West. It's taken a while to get her started...but the process is moving along fairly well. Attached Images

11-29-2011, 08:36 PM	#2
66farmer Registered User Join Date: Jun 2007 Location: North Plains Oregon Posts: 684	Re: The Old Man's Ride '66 C10 Shortbed Stepside Looks good, always glad to see someone else working on a stepside

11-30-2011, 12:57 AM	#3
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: The Old Man's Ride '66 C10 Shortbed Stepside Welcome aboard, and it looks like you have made some great progress!! __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker"

11-30-2011, 02:36 AM	#4
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,246	Re: The Old Man's Ride '66 C10 Shortbed Stepside Welcome to the forum What are your plans for your truck? __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

11-30-2011, 07:45 PM	#5
Chiefjrock Registered User Join Date: May 2009 Location: San Diego, CA Posts: 29	Re: The Old Man's Ride '66 C10 Shortbed Stepside Hey thanks everyone for the replies of encouragement. Plans for the truck are currently to keep it simple. I may lower it a few inches but other than paint, interior and newly rebuilt 350/350 combo; not much in the way of custom. I'll have more pix coming as I progress. Looking forward to sharing, as well as seeing some of the other builds and trucks in general. I love this site almost as much as I love my '66!!

12-01-2011, 12:25 AM	#6
66ChevyMax Senior Member Join Date: Oct 2011 Location: Wolfforth, Texas Posts: 976	Re: The Old Man's Ride '66 C10 Shortbed Stepside Welcome, your'e off to a great start. __________________ Craig 1966 Chevrolet C10 - Supercharged LS3 1968 Chevrolet Camaro 1957 Chevrolet 2dr Hardtop "It makes sence if you don't think about it" Mesquite 1966 C10 - LS3 W/ Air Ride http://67-72chevytrucks.com/vboard/s...=1#post4989763

12-01-2011, 12:27 PM	#8
Chiefjrock Registered User Join Date: May 2009 Location: San Diego, CA Posts: 29	Re: The Old Man's Ride '66 C10 Shortbed Stepside Very cool Doobiebro...I have some pix of the original truck before I started tearing it apart. Just need to get my pc up so I can retrieve them but hope to be posting more soon. Believe me ~ I know about waiting for a project to start. I waited about 8 yrs myself. Good Luck!

12-01-2011, 02:56 PM	#9
Chiefjrock Registered User Join Date: May 2009 Location: San Diego, CA Posts: 29	Re: The Old Man's Ride '66 C10 Shortbed Stepside A couple more pix. Had some severe rust going on in the cab (go figure) and had to have a patch welded in. The other shot is of the bed getting prepped...this is the second bed on this truck. The first one fell victim to a wreck while it was parked right out in front of my dad's house. Attached Images

12-04-2011, 04:41 PM	#10
Chiefjrock Registered User Join Date: May 2009 Location: San Diego, CA Posts: 29	Re: The Old Man's Ride '66 C10 Shortbed Stepside Just a bit more progress on the paint for the 'Ol Girl. Still trying to find some older pix on my other pc but here are some recent ones... I'm no mechanic and I have to get my carb and transmission linkage pieced back together. Anyone have any foolproof steps or pix on how to do this? I could hire a mechanic again but I'd like to save a few bucks doing it myself. Thx!! Attached Images

12-04-2011, 05:27 PM	#11
allaboutchevelles Registered User Join Date: Dec 2010 Location: sanford nc Posts: 499	Re: The Old Man's Ride '66 C10 Shortbed Stepside Real nice work on the body. Looks very straight and slick. Keep up the good work and keep the pics coming!! __________________ 69 chevelle malibu, 64 C-10 shortbed

12-04-2011, 11:19 PM	#12
McMurphy Registered User Join Date: Sep 2011 Location: Tacoma, WA Posts: 2,425	Re: The Old Man's Ride '66 C10 Shortbed Stepside The soft black really makes that red in your cab stand out in the pics !! Keep posting pics, I like the looks already! And Yeah!! Another stepside __________________ Michael McMurphy My 66 Stepside My 64 Tow Truck My 66 Tempest Table Of Contents Added to Page1

12-04-2011, 11:35 PM	#13
Chiefjrock Registered User Join Date: May 2009 Location: San Diego, CA Posts: 29	Re: The Old Man's Ride '66 C10 Shortbed Stepside Thanks McMurphy, I keep an eye on your build as well...looking nice as well! The black and red you see are the primer/base coats. The idea is to have this baby shining in a gloss black and torch red interior. My cell phone camera is at the ready...stay tuned!

12-07-2011, 08:38 PM	#14
Chiefjrock Registered User Join Date: May 2009 Location: San Diego, CA Posts: 29	Re: The Old Man's Ride '66 C10 Shortbed Stepside We put on some paint and clear coated the heck outta her! Got the new window seals/rubber put in and she looks great. Well, at least to me she does..lol. I kept the original back window but the rest are new and a buddy of mine reworked the window cranks...man they work nice! Like a brand new truck, without the power windows of course. I'll get more pix in later but wanted to share what I had. I need a mechanic in the San Diego area now...mine flaked and left me to have the transmission linkage and fuel setup needing to be installed. Anyone have any good step by step instructions or pix for me to go by?? Thx! Attached Images

12-07-2011, 10:58 PM	#15
allaboutchevelles Registered User Join Date: Dec 2010 Location: sanford nc Posts: 499	Re: The Old Man's Ride '66 C10 Shortbed Stepside wow, that paint job is looking slick!!! great job, loving the pics of progress!! __________________ 69 chevelle malibu, 64 C-10 shortbed

07-21-2016, 11:33 AM	#16
Chiefjrock Registered User Join Date: May 2009 Location: San Diego, CA Posts: 29	Re: The Old Man's Ride '66 C10 Shortbed Stepside Well, life kinda took over and again, put my project on hold...but in March I was finally able to get her started once again. She is currently at Moonshine Metal Shaping in El Cajon, CA and in the final stages of completion. Went with a 4" front and 4.5" rear drop (no bags...yet!) Also went with 18x8 Boss 338's all around. What a pain getting those fronts to fit. Disc brakes all around. A/C from Vintage Air, et, etc... Just a few pics of where we are now. Attached Images



Register or Log In To remove these advertisements.

07-21-2016, 11:41 AM	#17
66ChevyMax Senior Member Join Date: Oct 2011 Location: Wolfforth, Texas Posts: 976	Re: The Old Man's Ride '66 C10 Shortbed Stepside I had the same problem with the Boss Wheels, keep moving forward looks great! __________________ Craig 1966 Chevrolet C10 - Supercharged LS3 1968 Chevrolet Camaro 1957 Chevrolet 2dr Hardtop "It makes sence if you don't think about it" Mesquite 1966 C10 - LS3 W/ Air Ride http://67-72chevytrucks.com/vboard/s...=1#post4989763

07-21-2016, 11:45 AM	#18
Chiefjrock Registered User Join Date: May 2009 Location: San Diego, CA Posts: 29	Re: The Old Man's Ride '66 C10 Shortbed Stepside Thanks Craig.

07-21-2016, 12:40 PM	#19
Kyle@FTP Registered User Join Date: Dec 2013 Location: Escondido Posts: 700	Re: The Old Man's Ride '66 C10 Shortbed Stepside Nice little stepper. I love the red interior color. Look up the c10 club of San Diego. A great group of guys that get together with their old trucks. kyle

07-21-2016, 12:51 PM	#20
Chiefjrock Registered User Join Date: May 2009 Location: San Diego, CA Posts: 29	Re: The Old Man's Ride '66 C10 Shortbed Stepside Thanks Kyle. Just signed up for Fred's email blasts...I may swing in and pick up some gear soon. Diggin' that logo on the shirts!

08-19-2016, 12:26 PM	#21
Chiefjrock Registered User Join Date: May 2009 Location: San Diego, CA Posts: 29	Re: The Old Man's Ride '66 C10 Shortbed Stepside Got the ol girl into Old Iron Exhaust here in El Cajon, CA this week. Taylor hooked it up with a great Magnaflow 2.25" exhaust. Can't wait to fire her up!! Attached Images

02-07-2017, 11:37 AM	#22
Chiefjrock Registered User Join Date: May 2009 Location: San Diego, CA Posts: 29	Re: The Old Man's Ride '66 C10 Shortbed Stepside Finally got her on the road. A few bugs to workout but it sure does feel good being behind the wheel again. Haven't driven her since 2001!! Have all the bedwood ready to install as well. Keep ya posted. Attached Images

02-07-2017, 02:02 PM	#23
Vincenthdfan Registered User Join Date: Sep 2014 Location: Olympia, Washington Posts: 172	Re: The Old Man's Ride '66 C10 Shortbed Stepside I love the personalized license plate...nice touch.

02-07-2017, 04:03 PM	#24
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: The Old Man's Ride '66 C10 Shortbed Stepside Nice looking truck. Glad to see you get it on the road again. __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square

02-07-2017, 04:26 PM	#25
shp4man Registered User Join Date: Oct 2016 Location: San Diego, CA Posts: 548	Re: The Old Man's Ride '66 C10 Shortbed Stepside I'll look for you around town and at gear head events. Big Qualcomm swap meet coming up on the 24, 25 and 26. __________________ Everybody has to believe in something. I believe I'll have another beer.

Register or Log In To remove these advertisements.