Bucket seat conversion using bench seat brackets how to - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1969stepside · 07-13-2014, 12:25 AM

can you tell me how and where you decided to drill your holes in the floor to go from bench to buckets? did u use the existing holes on the outside and then drill where the other ones would go?

Beaumont@ · 07-13-2014, 05:55 PM

Quote:

Originally Posted by 1969stepside

can you tell me how and where you decided to drill your holes in the floor to go from bench to buckets? did u use the existing holes on the outside and then drill where the other ones would go?

It wasn't bad at all. I just used the existing driver's side bench seat bracket holes. I had to drill 4 new holes for the drivers side bracket closest to the console. It was easy enough with the other bracket to reference from.
For the passenger side just a little correction, it was not direct bolt in. 3 new holes had to be drilled. Only the existing outside front could be used.

Here's a good link for bolt hole locations:
http://67-72chevytrucks.com/vboard/s...d.php?t=516328

07-13-2014, 12:25 AM	#1
1969stepside Registered User Join Date: Feb 2008 Location: Johnson City Tennessee Posts: 1,176	Re: Bucket seat conversion using bench seat brackets how to can you tell me how and where you decided to drill your holes in the floor to go from bench to buckets? did u use the existing holes on the outside and then drill where the other ones would go? __________________ Greater love hath no man than to lay down his life for a friend. Members i Have met Earl Slick68 1969 Stepside Build thread http://67-72chevytrucks.com/vboard/s...=1#post4253546 Chevy Trucks the longest lasting most dependable trucks on the road



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.