Project OverKill - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Lemield · 07-10-2007, 09:10 AM

Looking good Alex....geez...that thing is REALLY rust free....my red C20 has very little rust but your's is amazing! Great job!

glock35ipsc · 07-10-2007, 09:38 AM

Damn, I guess I had better get the shop cleaned up!!!!!!

glock35ipsc · 07-10-2007, 10:13 AM

If all else fails, I still have a gooseneck flatdeck. It has a winch, I just need to replace the solenoid.

ColoradoK5 · 07-10-2007, 11:00 AM

Alex Looks good! I had talked to you about spray in liner in my Blazer But The Motor finally died. Looks like a really good start and can't wait to see more done.

ChevyDude · 07-10-2007, 11:41 AM

I remember! Agree, I think this is a great truck to start with! Going to go slow and do it right. Lots of OverKill things planned.

powell72 · 07-10-2007, 07:10 PM

Alex, you and Bob are welcome to use my car trailer when the time comes to save Bob some work.

glock35ipsc · 07-10-2007, 07:23 PM

Alex - I would leave it as a roller. Easier to move around, and it helps when it is time to pull the two halves together.

Chris - That would be awesome! My gooseneck is heavy. Does yours have a 6-way or 7-way plug? I have an adapter if it is a 6-way. You wanna go too when the day comes?

ChevyDude · 07-11-2007, 12:31 AM

I'll ready the frame down on this end....really appreciate the help!!!

powell72 · 07-11-2007, 12:34 AM

Quote:

Originally Posted by glock35ipsc

Chris - That would be awesome! My gooseneck is heavy. Does yours have a 6-way or 7-way plug? I have an adapter if it is a 6-way. You wanna go too when the day comes?

Sure, I'm up for a ride. It has no brakes, flat four, but I have the adapter for 6 to 4. Not like we'll need brakes for a roller frame anyways.

glock35ipsc · 07-11-2007, 09:29 AM

OK, I'll grab my 7 to 6 adapter, then we can plug yours into that one. Wait, I might have a 7 to 4 adapter. I need to look in the shop.

ChevyDude · 07-13-2007, 06:28 PM

Had just a lil' time today to yank the old tired 307 engine out. Little more progress, cab comes off next!!!

LUV2XCLR8 · 07-13-2007, 07:10 PM

Sheesh, nice truck to start with, nicer plans for it, and must be nice to be moving that fast

bad6772 · 07-13-2007, 07:33 PM

Chevy Dude thats one great looking truck, cant wait to see what ya do with it, any chance ya keep it a long bed??

ChevyDude · 07-13-2007, 07:50 PM

Quote:

Originally Posted by bad6772

Chevy Dude thats one great looking truck, cant wait to see what ya do with it, any chance ya keep it a long bed??

Thanks....But...not no....way ...no how...ain't gonna stay a Looooong bed. Snow Ball's chance in H!!! I already have the Tri-Plus new Oak floor Short bed for it. And a mint original tailgate. And Glocks plasma is frothing at the mouth!!!!

Alex

glock35ipsc · 07-13-2007, 08:20 PM

ChevyDude · 07-13-2007, 09:59 PM

Quote:

Originally Posted by LUV2XCLR8

Sheesh, nice truck to start with, nicer plans for it, and must be nice to be moving that fast

Yes yes...I feel VERY lucky to have found it (I had been looking for the "right truck" for almost a year) ,...and then to have had the opportunity to buy it. It was a REAL deal for $960.00! I have some really nice plans for her. New short bed with an oak floor, 5 speed, nicely massaged 350 or 383, ECE on the corners, sway bars front and back....not telling the color right now but she will be two tone. I'm a savin' and a savin' every day budgeting and a planning.

Alex

pharcydekm · 07-13-2007, 10:45 PM

Hey all you Colorado folk. I am moving to Englewood in about 10 days. Would love to meet up with you guys sometime. My truck will be staying behind for a few months until our house here sells. Anyway Alex that Truck is kickin I would kill to get my hands on a truck that clean! I really want to build another 67 SWB for a daily driver. Anyway keep the pics coming I know it is going to be great!

Thanks,
Ken

milehightoyz · 07-14-2007, 10:06 PM

wowza, this project is rolling right along. good to see the old rig getting the love it deserves. look forward to seeing updates.

ChevyDude · 07-16-2007, 06:16 PM

Little more done today. Got the cab completely stripped down. Just need to remove the keyed ignition...the old big paper clip trick. The wiring harness was as original and not one cut in it anywhere!!! It is amazing to me!!!

LUV2XCLR8 · 07-16-2007, 06:21 PM

Damn that's a nice cab

bad6772 · 07-16-2007, 06:34 PM

Quote:

Originally Posted by ChevyDude

Thanks....But...not no....way ...no how...ain't gonna stay a Looooong bed. Snow Ball's chance in H!!! I already have the Tri-Plus new Oak floor Short bed for it. And a mint original tailgate. And Glocks plasma is frothing at the mouth!!!!

Alex

aw chevy dude,i just shed a tear, you know like the littering commercial in the 70s 80s lol......its a sad sad day in long bed history, ah heck who am i kidding i cant wait to see the build/ hope it looks as good as your
lred short bed. good luck man...................tony

msgross · 07-16-2007, 07:24 PM

nice, is that a high hump? I thought those only came in BBC and 4wd's?

msgross · 07-16-2007, 07:31 PM

my 68 327 is V0504YX on the block, there is a website around that decodes the block, let me see if I can find it...

msgross · 07-16-2007, 07:33 PM

1968 Engine codes
Look up another year
Series Code Cyl CID HP COMP Carb Trans
1/2-Ton PF 6 250 155 8.5:1 1-bbl 4 Speed HD
1/2-Ton TA 6 250 155 8.5:1 1-bbl Manual
1/2-Ton TC 6 250 155 8.5:1 1-bbl Manual
1/2-Ton TD 6 250 155 8.5:1 1-bbl Manual
1/2-Ton TE 6 250 155 8.5:1 1-bbl Auto
1/2-Ton TF 6 250 155 8.5:1 1-bbl 4 Speed
1/2-Ton TT 6 250 155 8.5:1 1-bbl Powerglide
1/2-Ton UH 6 292 170 8.0:1 1-bbl Manual
1/2-Ton UP 6 292 170 8.0:1 1-bbl 3 Speed
1/2-Ton UR 6 292 170 8.0:1 1-bbl Manual
1/2-Ton WA 8 307 200 9.0:1 2-bbl Manual
1/2-Ton WC 8 307 200 9.0:1 2-bbl 3 Speed
1/2-Ton WE 8 307 200 9.0:1 2-bbl Powerglide
1/2-Ton WO 8 307 200 9.0:1 2-bbl 3 Speed
1/2-Ton ZO 8 307 200 9.0:1 2-bbl Manual
1/2-Ton YC 8 327 220 8.5:1 4-bbl Manual
1/2-Ton YD 8 327 220 8.5:1 4-bbl Powerglide
1/2-Ton YK 8 327 220 8.5:1 4-bbl 3 Speed
1/2-Ton YV 8 327 220 8.5:1 4-bbl 3 Speed
1/2-Ton YB 8 327 220 8.5:1 4-bbl Powerglide
1/2-Ton XE 8 396 310 9.0:1 4-bbl Manual/AIR
1/2-Ton XG 8 396 310 9.0:1 4-bbl 3 Speed
1/2-Ton XK 8 396 275 9.0:1 2-bbl Manual
1/2-Ton XL 8 396 275 9.0:1 2-bbl 3 Speed
3/4-Ton PC 6 250 155 8.5:1 1-bbl Manual
3/4-Ton PW 6 250 155 8.5:1 1-bbl 3 Speed
3/4-Ton PF 6 250 155 8.5:1 1-bbl 4 Speed HD
3/4-Ton PX 6 250 155 8.5:1 1-bbl 4 Speed
3/4-Ton TA 6 250 155 8.5:1 1-bbl Manual
3/4-Ton TC 6 250 155 8.5:1 1-bbl Manual
3/4-Ton TD 6 250 155 8.5:1 1-bbl Manual
3/4-Ton TE 6 250 155 8.5:1 1-bbl Auto
3/4-Ton TF 6 250 155 8.5:1 1-bbl 4 Speed
3/4-Ton TT 6 250 155 8.5:1 1-bbl Powerglide
3/4-Ton UH 6 292 170 8.0:1 1-bbl Manual
3/4-Ton UM 6 292 170 8.0:1 1-bbl Manual
3/4-Ton UN 6 292 170 8.0:1 1-bbl Manual
3/4-Ton UO 6 292 170 8.0:1 1-bbl Powerglide
3/4-Ton UP 6 292 170 8.0:1 1-bbl 3 Speed
3/4-Ton UQ 6 292 170 8.0:1 1-bbl 3 Speed
3/4-Ton UR 6 292 170 8.0:1 1-bbl Manual
3/4-Ton U3 6 292 170 8.0:1 1-bbl Manual
3/4-Ton WA 8 307 200 9.0:1 2-bbl Manual
3/4-Ton WB 8 307 200 9.0:1 2-bbl Manual
3/4-Ton WC 8 307 200 9.0:1 2-bbl 3 Speed
3/4-Ton WE 8 307 200 9.0:1 2-bbl Powerglide
3/4-Ton WF 8 307 200 9.0:1 2-bbl Manual
3/4-Ton WG 8 307 200 9.0:1 2-bbl Manual
3/4-Ton WO 8 307 200 9.0:1 2-bbl 3 Speed
3/4-Ton WR 8 307 200 9.0:1 2-bbl Powerglide
3/4-Ton ZO 8 307 200 9.0:1 2-bbl Manual
3/4-Ton ZS 8 307 200 9.0:1 2-bbl Manual
3/4-Ton YC 8 327 220 8.5:1 4-bbl Manual
3/4-Ton YD 8 327 220 8.5:1 4-bbl Powerglide
3/4-Ton YH 8 327 220 8.5:1 4-bbl 3 Speed
3/4-Ton YK 8 327 220 8.5:1 4-bbl 3 Speed
3/4-Ton YK 8 327 220 8.5:1 4-bbl Powerglide
3/4-Ton YS 8 327 220 8.5:1 4-bbl Manual
3/4-Ton YV 8 327 220 8.5:1 4-bbl 3 Speed
3/4-Ton YB 8 327 220 8.5:1 4-bbl Powerglide
3/4-Ton XE 8 396 310 9.0:1 4-bbl Manual/AIR
3/4-Ton XF 8 396 310 9.0:1 4-bbl Manual
3/4-Ton XG 8 396 310 9.0:1 4-bbl 3 Speed
3/4-Ton XH 8 396 310 9.0:1 4-bbl 3 Speed
3/4-Ton XK 8 396 275 9.0:1 2-bbl Manual
3/4-Ton XL 8 396 275 9.0:1 2-bbl 3 Speed
3/4-Ton XM 8 396 275 9.0:1 2-bbl 3 Speed
3/4-Ton XN 8 396 275 9.0:1 2-bbl Manual
1-Ton PW 6 250 155 8.5:1 1-bbl 3 Speed
1-Ton PX 6 250 155 8.5:1 1-bbl 4 Speed
1-Ton TF 6 250 155 8.5:1 1-bbl 4 Speed HD
1-Ton TL 6 250 155 8.5:1 1-bbl Manual
1-Ton UM 6 292 170 8.0:1 1-bbl Manual
1-Ton UN 6 292 170 8.0:1 1-bbl Manual
1-Ton UO 6 292 170 8.0:1 1-bbl 3 Speed
1-Ton UQ 6 292 170 8.0:1 1-bbl Manual
1-Ton WB 8 307 200 9.0:1 2-bbl 3 Speed
1-Ton WO 8 307 200 9.0:1 2-bbl Manual
1-Ton WG 8 307 200 9.0:1 2-bbl Manual
1-Ton WR 8 307 200 9.0:1 2-bbl 3 Speed
1-Ton YS 8 327 220 8.5:1 4-bbl Manual
1-Ton YH 8 327 220 8.5:1 4-bbl 3 Speed
1-Ton XF 8 396 310 9.0:1 4-bbl Manual
1-Ton XN 8 396 275 9.0:1 2-bbl Manual
K1/2-Ton PF 6 250 155 8.5:1 1-bbl 4 Speed
K1/2-Ton TA 6 250 155 8.5:1 1-bbl Manual
K1/2-Ton TT 6 250 155 8.5:1 1-bbl Powerglide
K1/2-Ton UH 6 292 170 8.0:1 1-bbl Manual
K1/2-Ton UR 6 292 170 8.0:1 1-bbl Manual
K1/2-Ton WI 8 307 200 9.0:1 2-bbl Manual
K1/2-Ton ZX 8 307 200 9.0:1 2-bbl 3 Speed
K1/2-Ton ZP 8 307 200 9.0:1 2-bbl Manual
K1/2-Ton YX 8 327 220 8.5:1 4-bbl Manual
K1/2-Ton YT 8 327 220 8.5:1 4-bbl 3 Speed
K3/4-Ton PF 6 250 155 8.5:1 1-bbl 4 Speed
K3/4-Ton PV 6 250 155 8.5:1 1-bbl Manual
K3/4-Ton TT 6 250 155 8.5:1 1-bbl Powerglide
K3/4-Ton TA 6 250 155 8.5:1 1-bbl Manual
K3/4-Ton TC 6 250 155 8.5:1 1-bbl Manual
K3/4-Ton TD 6 250 155 8.5:1 1-bbl Manual
K3/4-Ton UH 6 292 170 8.0:1 1-bbl Manual
K3/4-Ton UM 6 292 170 8.0:1 1-bbl Manual
K3/4-Ton UN 6 292 170 8.0:1 1-bbl Manual
K3/4-Ton UR 6 292 170 8.0:1 1-bbl Manual
K3/4-Ton U3 6 292 170 8.0:1 1-bbl Manual
K3/4-Ton WH 8 307 200 9.0:1 2-bbl Manual
K3/4-Ton WI 8 307 200 9.0:1 2-bbl Manual
K3/4-Ton ZY 8 307 200 9.0:1 2-bbl 3 Speed
K3/4-Ton ZX 8 307 200 9.0:1 2-bbl 3 Speed
K3/4-Ton ZP 8 307 200 9.0:1 2-bbl Manual
K3/4-Ton ZQ 8 307 200 9.0:1 2-bbl Manual
K3/4-Ton YX 8 327 220 8.5:1 4-bbl Manual
K3/4-Ton YL 8 327 220 8.5:1 4-bbl Manual
K3/4-Ton YT 8 327 220 8.5:1 4-bbl 3 Speed
K3/4-Ton YU 8 327 220 8.5:1 4-bbl 3 Speed

Lemield · 07-17-2007, 01:32 PM

Looking good Alex....boy, when you start a teardown, you don't fool around!

That is a REALLY NICE CAB on that old girl!

07-10-2007, 09:10 AM	#26
Lemield Registered User Join Date: Dec 2004 Location: Arvada Colorado Posts: 1,321	Re: Project OverKill Looking good Alex....geez...that thing is REALLY rust free....my red C20 has very little rust but your's is amazing! Great job! __________________ Larry 1949 Willys CJ2A, Kubota Turbo Diesel engine, Warn Overdrive, 11 inch brakes, 12volt, Warn M8000 Winch "Little Green" 1970 Rustoleum Roller Red C20 Custom Camper 454 TH400 "Big Red" 1971 K20 6.2 Turbo Diesel 4x4 4spd Ranger Overdrive "Pumpkin Wagon" 2005 VW Beetle Diesel 44+ MPG "Silver Bullet"

07-10-2007, 09:38 AM	#27
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,685	Re: Project OverKill Damn, I guess I had better get the shop cleaned up!!!!!! __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

07-10-2007, 10:13 AM	#28
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,685	Re: Project OverKill If all else fails, I still have a gooseneck flatdeck. It has a winch, I just need to replace the solenoid. __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE Last edited by glock35ipsc; 07-10-2007 at 10:13 AM.

07-10-2007, 11:00 AM	#29
ColoradoK5 Registered User Join Date: Jan 2007 Location: Denver Colorado Posts: 608	Re: Project OverKill Alex Looks good! I had talked to you about spray in liner in my Blazer But The Motor finally died. Looks like a really good start and can't wait to see more done.

07-10-2007, 11:41 AM	#30
ChevyDude Senior Member Join Date: Jun 2003 Location: Westminster, CO Posts: 3,071	Re: Project OverKill I remember! Agree, I think this is a great truck to start with! Going to go slow and do it right. Lots of OverKill things planned. __________________ Alex 1971 Lil' Red 350 SBC 700R4

07-10-2007, 07:10 PM	#31
powell72 Senior Member Join Date: Jan 2005 Location: Loveland Co. Posts: 3,098	Re: Project OverKill Alex, you and Bob are welcome to use my car trailer when the time comes to save Bob some work. __________________ Chris 74 Custom Deluxe SWB 350/350/3.73’s 99 2wd Silverado RCSB 5.3/4L60/3.90’s http://www.classictrucks.com/feature...short_bed.html

07-10-2007, 07:23 PM	#32
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,685	Re: Project OverKill Alex - I would leave it as a roller. Easier to move around, and it helps when it is time to pull the two halves together. Chris - That would be awesome! My gooseneck is heavy. Does yours have a 6-way or 7-way plug? I have an adapter if it is a 6-way. You wanna go too when the day comes? __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

07-11-2007, 12:31 AM	#33
ChevyDude Senior Member Join Date: Jun 2003 Location: Westminster, CO Posts: 3,071	Re: Project OverKill I'll ready the frame down on this end....really appreciate the help!!! __________________ Alex 1971 Lil' Red 350 SBC 700R4

07-11-2007, 09:29 AM	#35
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,685	Re: Project OverKill OK, I'll grab my 7 to 6 adapter, then we can plug yours into that one. Wait, I might have a 7 to 4 adapter. I need to look in the shop. __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

07-13-2007, 06:28 PM	#36
ChevyDude Senior Member Join Date: Jun 2003 Location: Westminster, CO Posts: 3,071	Re: Project OverKill Had just a lil' time today to yank the old tired 307 engine out. Little more progress, cab comes off next!!! Attached Images __________________ Alex 1971 Lil' Red 350 SBC 700R4 Last edited by ChevyDude; 07-13-2007 at 06:29 PM.

07-13-2007, 07:10 PM	#37
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,470	Re: Project OverKill Sheesh, nice truck to start with, nicer plans for it, and must be nice to be moving that fast __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

07-13-2007, 07:33 PM	#38
bad6772 Official Site Guitar Shredder Join Date: May 2006 Location: Oz Posts: 3,952	Re: Project OverKill Chevy Dude thats one great looking truck, cant wait to see what ya do with it, any chance ya keep it a long bed??

07-13-2007, 08:20 PM	#40
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,685	Re: Project OverKill __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

07-13-2007, 10:45 PM	#42
pharcydekm Registered User Join Date: May 2003 Location: Englewood, CO Posts: 146	Re: Project OverKill Hey all you Colorado folk. I am moving to Englewood in about 10 days. Would love to meet up with you guys sometime. My truck will be staying behind for a few months until our house here sells. Anyway Alex that Truck is kickin I would kill to get my hands on a truck that clean! I really want to build another 67 SWB for a daily driver. Anyway keep the pics coming I know it is going to be great! Thanks, Ken

07-14-2007, 10:06 PM	#43
milehightoyz AttentionDeficitDisorder Join Date: Mar 2005 Location: COLORADO Posts: 600	Re: Project OverKill wowza, this project is rolling right along. good to see the old rig getting the love it deserves. look forward to seeing updates.



Register or Log In To remove these advertisements.

07-16-2007, 06:16 PM	#44
ChevyDude Senior Member Join Date: Jun 2003 Location: Westminster, CO Posts: 3,071	Re: Project OverKill Little more done today. Got the cab completely stripped down. Just need to remove the keyed ignition...the old big paper clip trick. The wiring harness was as original and not one cut in it anywhere!!! It is amazing to me!!! Attached Images __________________ Alex 1971 Lil' Red 350 SBC 700R4 Last edited by ChevyDude; 07-16-2007 at 10:50 PM.

07-16-2007, 06:21 PM	#45
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,470	Re: Project OverKill Damn that's a nice cab __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

07-16-2007, 07:24 PM	#47
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: Project OverKill nice, is that a high hump? I thought those only came in BBC and 4wd's? __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

07-16-2007, 07:31 PM	#48
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: Project OverKill my 68 327 is V0504YX on the block, there is a website around that decodes the block, let me see if I can find it... __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

07-16-2007, 07:33 PM	#49
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: Project OverKill 1968 Engine codes Look up another year Series Code Cyl CID HP COMP Carb Trans 1/2-Ton PF 6 250 155 8.5:1 1-bbl 4 Speed HD 1/2-Ton TA 6 250 155 8.5:1 1-bbl Manual 1/2-Ton TC 6 250 155 8.5:1 1-bbl Manual 1/2-Ton TD 6 250 155 8.5:1 1-bbl Manual 1/2-Ton TE 6 250 155 8.5:1 1-bbl Auto 1/2-Ton TF 6 250 155 8.5:1 1-bbl 4 Speed 1/2-Ton TT 6 250 155 8.5:1 1-bbl Powerglide 1/2-Ton UH 6 292 170 8.0:1 1-bbl Manual 1/2-Ton UP 6 292 170 8.0:1 1-bbl 3 Speed 1/2-Ton UR 6 292 170 8.0:1 1-bbl Manual 1/2-Ton WA 8 307 200 9.0:1 2-bbl Manual 1/2-Ton WC 8 307 200 9.0:1 2-bbl 3 Speed 1/2-Ton WE 8 307 200 9.0:1 2-bbl Powerglide 1/2-Ton WO 8 307 200 9.0:1 2-bbl 3 Speed 1/2-Ton ZO 8 307 200 9.0:1 2-bbl Manual 1/2-Ton YC 8 327 220 8.5:1 4-bbl Manual 1/2-Ton YD 8 327 220 8.5:1 4-bbl Powerglide 1/2-Ton YK 8 327 220 8.5:1 4-bbl 3 Speed 1/2-Ton YV 8 327 220 8.5:1 4-bbl 3 Speed 1/2-Ton YB 8 327 220 8.5:1 4-bbl Powerglide 1/2-Ton XE 8 396 310 9.0:1 4-bbl Manual/AIR 1/2-Ton XG 8 396 310 9.0:1 4-bbl 3 Speed 1/2-Ton XK 8 396 275 9.0:1 2-bbl Manual 1/2-Ton XL 8 396 275 9.0:1 2-bbl 3 Speed 3/4-Ton PC 6 250 155 8.5:1 1-bbl Manual 3/4-Ton PW 6 250 155 8.5:1 1-bbl 3 Speed 3/4-Ton PF 6 250 155 8.5:1 1-bbl 4 Speed HD 3/4-Ton PX 6 250 155 8.5:1 1-bbl 4 Speed 3/4-Ton TA 6 250 155 8.5:1 1-bbl Manual 3/4-Ton TC 6 250 155 8.5:1 1-bbl Manual 3/4-Ton TD 6 250 155 8.5:1 1-bbl Manual 3/4-Ton TE 6 250 155 8.5:1 1-bbl Auto 3/4-Ton TF 6 250 155 8.5:1 1-bbl 4 Speed 3/4-Ton TT 6 250 155 8.5:1 1-bbl Powerglide 3/4-Ton UH 6 292 170 8.0:1 1-bbl Manual 3/4-Ton UM 6 292 170 8.0:1 1-bbl Manual 3/4-Ton UN 6 292 170 8.0:1 1-bbl Manual 3/4-Ton UO 6 292 170 8.0:1 1-bbl Powerglide 3/4-Ton UP 6 292 170 8.0:1 1-bbl 3 Speed 3/4-Ton UQ 6 292 170 8.0:1 1-bbl 3 Speed 3/4-Ton UR 6 292 170 8.0:1 1-bbl Manual 3/4-Ton U3 6 292 170 8.0:1 1-bbl Manual 3/4-Ton WA 8 307 200 9.0:1 2-bbl Manual 3/4-Ton WB 8 307 200 9.0:1 2-bbl Manual 3/4-Ton WC 8 307 200 9.0:1 2-bbl 3 Speed 3/4-Ton WE 8 307 200 9.0:1 2-bbl Powerglide 3/4-Ton WF 8 307 200 9.0:1 2-bbl Manual 3/4-Ton WG 8 307 200 9.0:1 2-bbl Manual 3/4-Ton WO 8 307 200 9.0:1 2-bbl 3 Speed 3/4-Ton WR 8 307 200 9.0:1 2-bbl Powerglide 3/4-Ton ZO 8 307 200 9.0:1 2-bbl Manual 3/4-Ton ZS 8 307 200 9.0:1 2-bbl Manual 3/4-Ton YC 8 327 220 8.5:1 4-bbl Manual 3/4-Ton YD 8 327 220 8.5:1 4-bbl Powerglide 3/4-Ton YH 8 327 220 8.5:1 4-bbl 3 Speed 3/4-Ton YK 8 327 220 8.5:1 4-bbl 3 Speed 3/4-Ton YK 8 327 220 8.5:1 4-bbl Powerglide 3/4-Ton YS 8 327 220 8.5:1 4-bbl Manual 3/4-Ton YV 8 327 220 8.5:1 4-bbl 3 Speed 3/4-Ton YB 8 327 220 8.5:1 4-bbl Powerglide 3/4-Ton XE 8 396 310 9.0:1 4-bbl Manual/AIR 3/4-Ton XF 8 396 310 9.0:1 4-bbl Manual 3/4-Ton XG 8 396 310 9.0:1 4-bbl 3 Speed 3/4-Ton XH 8 396 310 9.0:1 4-bbl 3 Speed 3/4-Ton XK 8 396 275 9.0:1 2-bbl Manual 3/4-Ton XL 8 396 275 9.0:1 2-bbl 3 Speed 3/4-Ton XM 8 396 275 9.0:1 2-bbl 3 Speed 3/4-Ton XN 8 396 275 9.0:1 2-bbl Manual 1-Ton PW 6 250 155 8.5:1 1-bbl 3 Speed 1-Ton PX 6 250 155 8.5:1 1-bbl 4 Speed 1-Ton TF 6 250 155 8.5:1 1-bbl 4 Speed HD 1-Ton TL 6 250 155 8.5:1 1-bbl Manual 1-Ton UM 6 292 170 8.0:1 1-bbl Manual 1-Ton UN 6 292 170 8.0:1 1-bbl Manual 1-Ton UO 6 292 170 8.0:1 1-bbl 3 Speed 1-Ton UQ 6 292 170 8.0:1 1-bbl Manual 1-Ton WB 8 307 200 9.0:1 2-bbl 3 Speed 1-Ton WO 8 307 200 9.0:1 2-bbl Manual 1-Ton WG 8 307 200 9.0:1 2-bbl Manual 1-Ton WR 8 307 200 9.0:1 2-bbl 3 Speed 1-Ton YS 8 327 220 8.5:1 4-bbl Manual 1-Ton YH 8 327 220 8.5:1 4-bbl 3 Speed 1-Ton XF 8 396 310 9.0:1 4-bbl Manual 1-Ton XN 8 396 275 9.0:1 2-bbl Manual K1/2-Ton PF 6 250 155 8.5:1 1-bbl 4 Speed K1/2-Ton TA 6 250 155 8.5:1 1-bbl Manual K1/2-Ton TT 6 250 155 8.5:1 1-bbl Powerglide K1/2-Ton UH 6 292 170 8.0:1 1-bbl Manual K1/2-Ton UR 6 292 170 8.0:1 1-bbl Manual K1/2-Ton WI 8 307 200 9.0:1 2-bbl Manual K1/2-Ton ZX 8 307 200 9.0:1 2-bbl 3 Speed K1/2-Ton ZP 8 307 200 9.0:1 2-bbl Manual K1/2-Ton YX 8 327 220 8.5:1 4-bbl Manual K1/2-Ton YT 8 327 220 8.5:1 4-bbl 3 Speed K3/4-Ton PF 6 250 155 8.5:1 1-bbl 4 Speed K3/4-Ton PV 6 250 155 8.5:1 1-bbl Manual K3/4-Ton TT 6 250 155 8.5:1 1-bbl Powerglide K3/4-Ton TA 6 250 155 8.5:1 1-bbl Manual K3/4-Ton TC 6 250 155 8.5:1 1-bbl Manual K3/4-Ton TD 6 250 155 8.5:1 1-bbl Manual K3/4-Ton UH 6 292 170 8.0:1 1-bbl Manual K3/4-Ton UM 6 292 170 8.0:1 1-bbl Manual K3/4-Ton UN 6 292 170 8.0:1 1-bbl Manual K3/4-Ton UR 6 292 170 8.0:1 1-bbl Manual K3/4-Ton U3 6 292 170 8.0:1 1-bbl Manual K3/4-Ton WH 8 307 200 9.0:1 2-bbl Manual K3/4-Ton WI 8 307 200 9.0:1 2-bbl Manual K3/4-Ton ZY 8 307 200 9.0:1 2-bbl 3 Speed K3/4-Ton ZX 8 307 200 9.0:1 2-bbl 3 Speed K3/4-Ton ZP 8 307 200 9.0:1 2-bbl Manual K3/4-Ton ZQ 8 307 200 9.0:1 2-bbl Manual K3/4-Ton YX 8 327 220 8.5:1 4-bbl Manual K3/4-Ton YL 8 327 220 8.5:1 4-bbl Manual K3/4-Ton YT 8 327 220 8.5:1 4-bbl 3 Speed K3/4-Ton YU 8 327 220 8.5:1 4-bbl 3 Speed __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

07-17-2007, 01:32 PM	#50
Lemield Registered User Join Date: Dec 2004 Location: Arvada Colorado Posts: 1,321	Re: Project OverKill Looking good Alex....boy, when you start a teardown, you don't fool around! That is a REALLY NICE CAB on that old girl! __________________ Larry 1949 Willys CJ2A, Kubota Turbo Diesel engine, Warn Overdrive, 11 inch brakes, 12volt, Warn M8000 Winch "Little Green" 1970 Rustoleum Roller Red C20 Custom Camper 454 TH400 "Big Red" 1971 K20 6.2 Turbo Diesel 4x4 4spd Ranger Overdrive "Pumpkin Wagon" 2005 VW Beetle Diesel 44+ MPG "Silver Bullet"

Register or Log In To remove these advertisements.