|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
04-20-2004, 04:16 PM
|
#1 |
|
Registered User
Join Date: Apr 2002
Location: Manitoba, Canada
Posts: 663
|
Rear Discs and e brake
I was just in touch with a guy who was selling some plans for rear disc brakes on e-bay. Apparently his bracket plans allow a guy to use 88 chevy 4x4 front rotors and s10 calipers. The system doesn't allow for any e-brake though.
Is there away from this - using some kind of brake line pressure valve? Should I just keep looking for a 70's lincoln rear end? Advice...
__________________
Present: 2015 Tacoma. Yeah, not a GM, but I love it. 1969 GMC 32,000 - fix, drive, relax, fix... 2019 BMW R1250 GSA - Yahoooooooo 1979 Honda GL 1000 - retro touring at its best. Past: '05 Sierra 4x4 - Had 270,000 KM and running well when it was written-off by a stop sign runner. '94 F-150 from the "F word" company. I'll admit it...good truck. Sold what was left of it for $800 to a guy who came to pick it up at 11:00 PM with cash in hand. Hmm. '79 Sierra Grande (Black) organ donor - perfect rebuildable 4-bolt 350 and a good TH350. '76 Sierra Grande (Orange) - hate isn't too strong a word. Kid who bought it turned it into a hot rod. '68 C-10 R.I.P. - Dad's old truck...too far gone to resurrect. '59 C-50 - with hoist. Truck is gone, wife isn't. Nuff said. |
|
|
|
04-20-2004, 04:31 PM
|
#2 |
|
Project Junkie! Fishing Poor!!
 
Join Date: Dec 1999
Location: Olympia,Wa. 98512
Posts: 10,770
|
There are plenty of 6 lug kits available. We sell them at.. $849.95 (OUCH)!!! But these are set up so that you can still use your emergency brakes. The new emergency brake cables that fit this kit are $89.95 per pair. WES www.ClassicHeartbeat.com
__________________
On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys |
|
|
|
|
04-20-2004, 04:41 PM
|
#3 |
|
Registered User
Join Date: May 2000
Location: Petrolia,Ontario,Canada but working in Port Huron,Mi.
Posts: 1,769
|
I used the TSM brackets and 86 Eldorado calipers with integral e-brake.
It was a pretty easy swap and with a small modification my orig. e-brake cable I was able get the e-brake working. The one problem is the travel of the e-brake is not enough to FULLY engage the e-brake.I think I cut and shorten the e-brake lever on the caliper I can get these e-brake to hold TIGHT. TSM kit.Braided lines were 50 bucks extra    here's the e-brake cable mod.I cut it about 2" ,removed the factory return spring and enlarged the Eldorado's opening that the cable goes through.  ALL the pic's can be seen HERE Just scroll down the the appropriate album.
__________________
71 blazer,350SBC,approx.375HP,700R4,factory GM TPI.Dual electric fans,33x12.5x15 ATR on stock suspension. Petrolia,Ontario,Canada but working in Port Huron,MI. See ALL my Blazer pic's HERE |
|
|
|
|
04-20-2004, 05:48 PM
|
#4 |
|
Account Suspended
Join Date: Jul 2003
Posts: 1,284
|
rear disk brakes
we used a kit from CPP and I think it was around 600.00, it was a direct bolt on and no modifications were needed they also used late model Caddy calipers.
Shawn |
|
|
|
|
04-20-2004, 05:48 PM
|
#5 |
|
Account Suspended
Join Date: Jul 2003
Posts: 1,284
|
pic2
|
|
|
|
|
04-20-2004, 07:27 PM
|
#6 | |
|
Registered User
Join Date: Jun 2003
Location: spokane wa
Posts: 2,189
|
I couldn't resist.
You know me and rear disc brakes (check sig for website) Blackbird's Custom makes kits for a good price...  Quote:
I'll pass this by Randy. Anybody can make up a kit and sell it on ebay. But reputable business are always safer to deal with.. An from this board and the internet there are a good deal of them. We have had a couple people buy ebay brackets and couldn't get them to work and lost out on money and time.. We worked with them to get them handled, but it shouldn't come to that.. Just a heads up with Ebay brackets.. I'll see what randy thinks and come back..
__________________
Support The Board |
|
|
|
|
|
04-20-2004, 11:26 PM
|
#7 |
|
Registered User
Join Date: May 2000
Location: Petrolia,Ontario,Canada but working in Port Huron,Mi.
Posts: 1,769
|
Rick,how'd you get the e-brake to pull tight.
I've adjusted my e-brake foot lever to all different configurations and can only get it to pull so far. Did you use aftermarket e-brake cables or are they factory. Don't get me wrong,my e-brake works...I just feel there is room for improvement.  By the way...them some shiney brakes you got there. Looks good!
__________________
71 blazer,350SBC,approx.375HP,700R4,factory GM TPI.Dual electric fans,33x12.5x15 ATR on stock suspension. Petrolia,Ontario,Canada but working in Port Huron,MI. See ALL my Blazer pic's HERE |
|
|
|
|
04-20-2004, 11:32 PM
|
#8 |
|
Account Suspended
Join Date: Jul 2003
Posts: 1,284
|
we just used the factory (for the truck) cable and everything worked out.
Shawn |
|
|
|
|
04-20-2004, 11:58 PM
|
#9 |
|
Registered User
Join Date: Feb 2004
Location: Victoria B.C.
Posts: 101
|
Excuse me but what is ccp and do they have a web site. I am looking for a kit for a 14 bolt rear end ff. Thanks.
|
|
|
|
|
04-21-2004, 12:16 AM
|
#10 |
|
Account Suspended
 
Join Date: Jun 2003
Location: PA
Posts: 1,411
|
Doin' a 14 Bolt Full Floater
I'm doing my 14 Bolt Full Floater right now. I have all the part numbers if anyone is interested. Even with replacing ALL the bearings, races, and seals, new rotors, calipers w/E-brake, pads, hoses and hard lines, and appropriate E-brake cables, the parts came in under $400.00 end to end. Had to buy the brackets off E-Bay, but checked out the seller real good first. Asked alot of questions, and did alot of cross-referencing.
Probably start the install after Carlisle show this Friday. Anybody else going?? 72longbed    
|
|
|
|
|
04-21-2004, 12:29 AM
|
#11 |
|
Registered User
Join Date: Feb 2004
Location: Victoria B.C.
Posts: 101
|
That list would be great.If you could e-mail me at red_beard_brian@hotmail.com or post. Thanks.
|
|
|
|
|
04-21-2004, 12:39 AM
|
#12 |
|
Account Suspended
Join Date: Jun 2003
Location: PA
Posts: 1,411
|
Brian,
I'll dig out my parts list from the garage tomorrow and e-mail it to you. It's been a long day and I'm sittin' here in my underwear half asleep. Looking forward to loosing 75 -85 lbs of weight off the rear of your truck as I am?? It's gonna' be very cool to have that 'BullitProof' rear with Disks!!  72longbed |
|
|
|
|
04-21-2004, 12:53 AM
|
#13 |
|
Registered User
Join Date: Jun 2003
Location: spokane wa
Posts: 2,189
|
Edited: to keep the peace...
__________________
Support The Board Last edited by drink2mny; 04-21-2004 at 11:15 AM. |
|
|
|
|
04-21-2004, 10:57 AM
|
#14 |
|
Account Suspended
Join Date: Jun 2003
Location: PA
Posts: 1,411
|
Drink2mny,
I'm not a retail outfit. I don't profit by sharing my knowledge and experiences with other members. I'm not using this site as a guise to 'hawk' goods. ( You might sense a lingering animosity towards 'Retailers' on this site for all the times I was 'Back-Doored' by them on MY threads on the Parts Board.)  P.S. I'm sure my new 12" rotors front and back will stop my 2wd truck with 265/70/R16's just fine. Not concerned one bit. 72longbed ( Doesn't sell truck parts for a living)
|
|
|
|
|
04-21-2004, 11:14 AM
|
#15 |
|
Registered User
Join Date: Jun 2003
Location: spokane wa
Posts: 2,189
|
I hope i didn't come across as an A$$..
I was just giving a heads up about those style brackets with the tube spacers.. People can give free info and help anytime. I don't have any problem with you or anyone giving free info or parts listings.. Sorry if It sounded like I was bagging on what you have.. Just a safety concern that we have been seeing at rock crawls and obstacle course races..The flex on those brackets has snapped some with the larger tires.. Hey for what its worth sorry you have been back doored.. I'll edit my post to hopefully keep you a friend on here..
__________________
Support The Board |
|
|
|
|
04-21-2004, 11:31 AM
|
#16 |
|
Account Suspended
Join Date: Jul 2003
Posts: 1,284
|
I am a little lost about what happened in this thread but if I offended anyone by responding to this thread I appologize for that, but I benifit in no way by reffering people to check out CPP, I was just telling people that I was pleased w/ thier products.
72jimmy4x4 - search for Classic Performance Products Shawn |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
