My '67 Fleetside C10 renew

[jlsanborn]

Chip talked us off the edge. Progress!!

[Kronald_70GMC]

Looks awesome!

[Vic1947]

Just keeps getting better, John. That metallic should really pop in the sun!

[jlsanborn]

Thanks for the comments! I was going to roll that hood outside for a photo but we got a good RAIN! We've been socked in with smoke for a month anyways, so I still haven't seen the real color. As soon as we have a nice clear day I will.

[jlsanborn]

Found a couple in Fathom Green at Goodguy's...

[Low Elco]

Coming together, can't wait to see it outside!

[jlsanborn]

The buff continues! Knucks has done 90% of the sanding and buffing. There are a few small areas that need a little more love but we were able to pin the cab down for good and assemble the front clip. Gaps look great, super happy! Went to the box stores looking for S4S oak but that was an $1100 ticket - F that! I'm going to have to go to the other lumber store and get some 4/4 live edge to do the bed floor. My neighbor has an overhead sander, we'll see how well we get along! I know he's got a four wheeler that won't start... I also got my big box from Summit (finally). The little mouse is going together but still have some details to work out. The fires out here are piddling out and we're getting back on the bikes so weekend truck time will be cut but winter is right around the corner!
Stay tuned, boys!.

[Low Elco]

Congratulations, man. You two have every right to be proud of that one. Great looking job.

[Vic1947]

X2 !!

All that hard work is paying off, it's a looker.

[jlsanborn]

Thanks, dudes! The weather has allowed us to get back out in the woods, so truck time has been limited. Pissing rain now, so I went and bought some Red Oak for the bed floor. I'm really looking forward to this piece of the puzzle! Like I said, it's pissing rain. These boards got a little wet, so I'm letting them dry for a minute before I start milling them. I'm on bbq duty right now, Knucks is taping that motor up for some paint! Pics coming...

[jlsanborn]

No riding today! We're going to get rolling on this thing again. I used the dimensions off GMC Paul's bed wood pages. We'll see!

[jlsanborn]

Got this about like this now too! Gotta sort out valve cover gaskets, then mill the spacers as much as I can. I've got the Pro-Billet dizzy and wires that I'm going to fit up while it's on the stand. I'm running the wires down, then up the bell housing.

[Kronald_70GMC]

Awesome! Coming along, you'll be driving it in no time.

[72 tigger]

Nice progress! You’ll be ready for spring

[Low Elco]

Looks great!

[dnd1978]

Looks slick!