AL GIANT 60-66 parts Stash Barn Find!!

[GMCNUT]

Originally Posted by Franklin1775

My current shipping zip code is 28460. I might need the steel shaft. My truck currently has a late 70's jeep steering column in it... Could you pm me a picture of the chevy one?

Well, Franklin, I went and retrieved the 2nd column and pulled the aftermarket steering wheel off, and discovered it to have a GMC Turn Signal switch in it - so the turn signal switch and wiring are complete and the switch seems to actuate, so there is a higher than normal chance it works, but if it doesn't you'd have to buy a 1963 Chevy Turn Signal switch to replace it, because GMC columns use a Pontiac designed metal switch vs plastic Chevrolet switches, and the bolts don't line up between Chevy reproduced switches and the GMC housing unless you use the 63 Chevy switch. So point being, neither of my columns are Chevy columns, but are otherwise identical to Chevy columns in terms of appearance and operation. Let me know if you are good with this, and I'll wrap it up and weigh and get a shipping quote and pics

[GMCNUT]

Originally Posted by The Rocknrod

Do you have an ashtray that's not rusted through? Mine has a hole in it. The dash side (or cover/handle) of mine is great. Or if you just want to sell the assembly.

I bought a low mileage truck that was in a million pieces, and the old guy who disassembled it put every part in a bag or marked box in a very detailed fashion. Somewhere in all those bags I saw the original ash tray and it was real nice if I recall - I'll be in the bldg again tomorrow and will look for it for you

[GMCNUT]

Originally Posted by 70chevytruck

65 Chevy shortbed.

Need tailgate and trunions.
Need trim on sides of truck for whole truck.
Need badges C10 that go on sides of cowl.

Got any of that?

Thanks.

No spare tailgates, and you don't want used trunions - buy the aftermarket ones - they are cheap and nice. Don't think I have a full set of trim but will dig out what I have. Don't have a set of the 65 style C10 emblems but I think my buddy Randy does - will check and post back

[The Rocknrod]

Originally Posted by GMCNUT

I bought a low mileage truck that was in a million pieces, and the old guy who disassembled it put every part in a bag or marked box in a very detailed fashion. Somewhere in all those bags I saw the original ash tray and it was real nice if I recall - I'll be in the bldg again tomorrow and will look for it for you

Okay, thanks.

[AJCK87]

Hello,

Do you have a 60-66 passengers side barn door for sale? I am looking for one that is in decent shape to replace the one I have.

[GMCNUT]

Originally Posted by AJCK87

Hello,

Do you have a 60-66 passengers side barn door for sale? I am looking for one that is in decent shape to replace the one I have.

Sorry - all I have is a Suburban tailgate and liftgate - no barn doors

[AJCK87]

Originally Posted by GMCNUT

Sorry - all I have is a Suburban tailgate and liftgate - no barn doors

Thank you anyways! Should have a line on a door with one of the other members.

[lasher78]

Do you have a complete fleetside shortbed 64-66?

[lasher78]

And is the panel truck still in tack? Might be intetested in it for parts truck..i also have a 64 panel

[GMCNUT]

Originally Posted by lasher78

And is the panel truck still in tack? Might be intetested in it for parts truck..i also have a 64 panel

sorry - panel truck is long gone....this is a growing but very old thread so a lot of the first pictured items are gone, but we may have several matching items now depending on what you guys are asking for.

[GMCNUT]

Originally Posted by lasher78

Do you have a complete fleetside shortbed 64-66?

I sure do - problem is, there's no way to get you current pictures of it and its mostly in bare metal. I have two pairs of imperfect short fleet box sides too - one set for 60-61 trucks only (has 60-61 trim holes) and one set could be used for anything 60-66. I would recommend someone coming here in person and seeing with thier own two eyes whether or not these parts are useable to them

[lasher78]

Originally Posted by GMCNUT

I sure do - problem is, there's no way to get you current pictures of it and its mostly in bare metal. I have two pairs of imperfect short fleet box sides too - one set for 60-61 trucks only (has 60-61 trim holes) and one set could be used for anything 60-66. I would recommend someone coming here in person and seeing with thier own two eyes whether or not these parts are useable to them

I live in southern mo so i would need pics of complete bed to decide if to make drive

[The Rocknrod]

Originally Posted by GMCNUT

I bought a low mileage truck that was in a million pieces, and the old guy who disassembled it put every part in a bag or marked box in a very detailed fashion. Somewhere in all those bags I saw the original ash tray and it was real nice if I recall - I'll be in the bldg again tomorrow and will look for it for you

So did you go to that building and see the ashtray?

[hayseed71]

I know this thread has been going on for a few years and i may be out of luck but would you hae any heater parts? Like the door or flapper that the "heat" cable controls on a deluxe heater? Its in the heater box under the hood and controls how much air blows across the heater core. Also do you have any 6 lug aluminum slots? Thanks.

[verdell]

Hey GMCNUT,

I'm looking for a passenger side door for a 60-63. Any left over there? I'm about 3 hours away here in MS.

[buick1]

Nevermind on the inner fenders! I scored a nice set on Ebay! Thank You Anyway!

[badherb]

"I know this thread has been going on for a few years and i may be out of luck but would you hae any heater parts? Like the door or flapper that the "heat" cable controls on a deluxe heater? Its in the heater box under the hood and controls how much air blows across the heater core. Also do you have any 6 lug aluminum slots? Thanks."
if he does not have a complete heater box I do. will only sell whole thing but let the poster find his if he has one.


For original poster>>>>> I need turn signal bezels for a 60 ugly hood like these

I need both you gots????

[62chevy302]

I need a core support for 65 c10

[64k10burb]

I would be interested in any 64-66 suburban interior window trim you might have left-thanks

[sampsmit000]

do you have any gauge clusters

[vetnat]

Hi. Passenger door mirror arm? I have a mirror with rectangular head.

[gfogg]

I've got a 66 GMC pick up with dual head lights. All the headlight stuff on the left side is messed up. I need the panel that that the headlight buckets are mounted to. It has the headlight adjusters and retaining springs. I need them as well. I also need the headlight buckets and the retaining rings for the head lightd. Anybody can help please contact me by e-mail gfogg@suddenlink.net or call (928) 680-7709. Oh I tried some repop stuff didn't work. TIA

gfogg is online now Report Post

[Isaiah92260]

Do have a 60-63 heater dash controls housing/cover. Thank you

[urmyboyblue]

GMC Nut- are you trying to buy this one?

https://bham.craigslist.org/cto/5489133223.html

If you are, I want to talk to you about the hood. I called but I am 7th in line.

[Bpilcher72]

still got 2 good doors to fit a 61?