Another fender flare question but 67-72 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**71blksuper4x4** · 10-23-2009, 05:46 PM

Anybody have pics of fender flares on their 67-72 or ones that they have saved? I am looking at possibly putting a set of bushwacker pocket flares or something like that on a crew cab build eventually and wanted to see what they look like on. Thanks Trevor

msgross · 10-23-2009, 08:14 PM

well, this pic might not talk you into them..

but it has flares..

**71blksuper4x4** · 10-23-2009, 08:54 PM

Every bit helps Mike, but that truck does nothing for me.

I am trying to see if there is a fender flare out there that looks pretty classy for these style trucks, but goes well with factory trim, even if I have to "fit" them. Thanks Trevor

msgross · 10-24-2009, 08:11 AM

I took a picture of that truck because it was so ugly!

but the flares are kinda cool... vtblazer might have some ideas for you, he's a big tire rock crawlin guy though so I bet he just cuts his fenders...

**special-K** · 10-24-2009, 08:40 AM

I believe those are the only option in fender flares.Too bad Bushwacker doesn`t make an Extend-A-Flare for these years.

superchevy · 10-26-2009, 09:52 PM

LMC has some simple flares in black.
Here's the link:

http://www.lmctruck.com/icatalog/cb/full.aspx?Page=87

**special-K** · 10-27-2009, 08:56 AM

oh yeah,the ole rubber fender lips

.I ran them on a truck with 14.50s back when.

**71blksuper4x4** · 10-27-2009, 11:02 AM

yeah, I have run those flexible ones before. I would not run them on this crew cab. I don't mind the bolts around the bushwacker ones, but I hate how tall they are. They seem to go up 3/4 of the fender, if they weren't so dang tall, I bet I would like them more. Trevor

iluvmy72 · 10-27-2009, 10:32 PM

The trim should not even be a issue if you plan on putting on flares. To me the flares mean you plan on kicking up alot of gunk and you plan to do some good off roading. Your trim will get beat up anyway. Or is this more of a looks thing here? BUt if you need flares, I promise you the tgrim is not worth salvaging.

-Greg72 · 04-21-2021, 08:12 PM

Here's a bump and a couple of photos of a recent project with flares....
All steel construction and trying hard to preserve the "stock" look even though they are holding a much larger tire.

-G

10-23-2009, 05:46 PM	#1
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,149	Another fender flare question but 67-72 Anybody have pics of fender flares on their 67-72 or ones that they have saved? I am looking at possibly putting a set of bushwacker pocket flares or something like that on a crew cab build eventually and wanted to see what they look like on. Thanks Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

10-23-2009, 08:14 PM	#2
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: Another fender flare question but 67-72 well, this pic might not talk you into them.. but it has flares.. __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

10-23-2009, 08:54 PM	#3
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,149	Re: Another fender flare question but 67-72 Every bit helps Mike, but that truck does nothing for me. I am trying to see if there is a fender flare out there that looks pretty classy for these style trucks, but goes well with factory trim, even if I have to "fit" them. Thanks Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

10-24-2009, 08:11 AM	#4
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: Another fender flare question but 67-72 I took a picture of that truck because it was so ugly! but the flares are kinda cool... vtblazer might have some ideas for you, he's a big tire rock crawlin guy though so I bet he just cuts his fenders... __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

10-24-2009, 08:40 AM	#5
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: Another fender flare question but 67-72 I believe those are the only option in fender flares.Too bad Bushwacker doesn`t make an Extend-A-Flare for these years. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

10-26-2009, 09:52 PM	#6
superchevy Got big-block? Join Date: Jul 2000 Location: Austin, Texas Posts: 2,453	Re: Another fender flare question but 67-72 LMC has some simple flares in black. Here's the link: http://www.lmctruck.com/icatalog/cb/full.aspx?Page=87 __________________ '68 CST SWB factory 396/T400 buddy buckets, a/c, ps, pb '72 Corvette convertible 454/4spd/ac, ps, pb '73 GMC Sierra Grande short wide 454/T400 ps, pb, ac '77 K5 Blazer black on red, 350/T350/NP205 ps, pb, ac all original '78 GMC Sierra Classic short wide 454/T400 ps, pb, ac '72 GMC Sprint SP454. 1 of 38 built. '73 GMC Sprint SP454. 1 of 71 built. '75 GMC Sprint SP454. 1 of 25 built. SOLD! '72 GMC K25 4x4 468/4L80e/NP205 build thread http://67-72chevytrucks.com/vboard/s...23#post4324423 SOLD!'55 Chevy gasser 496/4spd build thread http://67-72chevytrucks.com/vboard/s...96#post4324396

10-27-2009, 08:56 AM	#7
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: Another fender flare question but 67-72 oh yeah,the ole rubber fender lips .I ran them on a truck with 14.50s back when. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

10-27-2009, 11:02 AM	#8
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,149	Re: Another fender flare question but 67-72 yeah, I have run those flexible ones before. I would not run them on this crew cab. I don't mind the bolts around the bushwacker ones, but I hate how tall they are. They seem to go up 3/4 of the fender, if they weren't so dang tall, I bet I would like them more. Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

10-27-2009, 10:32 PM	#9
iluvmy72 Registered User Join Date: Jan 2002 Location: Springville, UT, USA Posts: 1,010	Re: Another fender flare question but 67-72 The trim should not even be a issue if you plan on putting on flares. To me the flares mean you plan on kicking up alot of gunk and you plan to do some good off roading. Your trim will get beat up anyway. Or is this more of a looks thing here? BUt if you need flares, I promise you the tgrim is not worth salvaging.

04-21-2021, 08:12 PM	#10
-Greg72 Registered User Join Date: Nov 2001 Location: Austin, TX Posts: 308	Re: Another fender flare question but 67-72 Here's a bump and a couple of photos of a recent project with flares.... All steel construction and trying hard to preserve the "stock" look even though they are holding a much larger tire. -G __________________ 1972 K5 - 502BBC/4L80E/Magnum205/Mog-9s/5.26s/38" BFG KM2s Find me on INSTAGRAM @MIGHTASWELLK5 '72 K5 - Greg's "Might As Well™" Build



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.