'74 Honda Z50

[68Timber]

I'll state up front I have zero need for this and it was a bad idea to bring it home with two project trucks already in the drive, but hey, it happened. I found this on craigslist and happened to have empty pockets that day, but I texted it to a friend and he ended up buying it. Several months down the road he'd bought a new house and hadn't started on the bike when he offered it to me for what he had in it.

It didn't run, so it was cheap. The PO had installed shocks off a 70 to get the seat height up but the orginals came with it. Also, the original gas tank was rusted through on one side but my friend had bought a new aftermarket replacement that came with it. So it's all there except for the original tailpipe. It also came with new tires and tubes. Here's what came home.

[68Timber]

The plan was to clean the carb and get it running first then make it pretty. But the original plastic intake spacer was cracked around the bolt holes when I started. So I cleaned the carb, started cleaning on the original shocks, and then I got impatient. So I went ahead and started taking it apart.

[68Timber]

I left the forks and swing arm on the frame and broke out the pressure washer. Underneath it had been blue once and green before that. It will be blue again, that was the color tank my friend bought. I also got the tires cut off and the wheel halves separated and run through the blast cabinet and got everything in primer.

[68Timber]

Here's where I ran into a snag. The replacement tank was painted the correct '74 Honda blue. All the paint I'm using is rattle can, but I do want it to look right, and the cheapest I could find the correct paint in rattle can was $90-something a can online. I was in Car Quest and saw GM Bahama Blue for $7 a can and decided to run with it. But the tank wasn't going to match, unless...

[68Timber]

Yes, I sanded the cracks out of the primer. That was Rustoleum Filler Primer, and it cracks while drying if you lay it on too thick. So I used a regular primer and sanded it smooth with 400 grit and sprayed it with the Bahama Blue. It came out really nice. I have cleared it since this picture and don't have any regrets sanding down a painted and ready to go tank - it really does look nice. I'll get a better pic later.

[68Timber]

So, from what I've seen online, the frame is supposed the be black and the forks match the tank and side cover. So, more sanding and painting... The wheels are done with the new tubes/tires installed. The wheels were painted with GM rally silver since I had a few cans.

[tommys72]

Pretty neat little project

[jchav62]

Too cool!

[chevyrestoguy]

I've still got my 1969 Z50 K1, which was my first motorcycle. It needs to be completely restored, but it'll happen as soon as I can get a couple of other projects done first. My bike is the factory candy red with the candy red/silver tank.

I also have a "barn find" 1968 Honda CT90 that runs like a top. I love vintage Japanese bikes because they are a real flashback to my youth.

[68Timber]

Originally Posted by tommys72

Pretty neat little project

Originally Posted by jchav62

Too cool!

Thanks guys!

Originally Posted by chevyrestoguy

I've still got my 1969 Z50 K1, which was my first motorcycle. It needs to be completely restored, but it'll happen as soon as I can get a couple of other projects done first. My bike is the factory candy red with the candy red/silver tank.

I also have a "barn find" 1968 Honda CT90 that runs like a top. I love vintage Japanese bikes because they are a real flashback to my youth.

I know what you mean. There was a old green and original XL75 at the Moultrie swap meet last year I wanted to bring home. My bud thought I was nuts. Post a pic of your Z50 if you have one, and very cool that you've hung on to it!

[screamin_c10]

I always liked the blue 1st gen Z50s... good lookin little bikes...

CLick the link in my sig, we retro modded my old 79 Z50. Little thing sure surprises people when they see my big a$$ comin... LOL

125CC CDI ignition, Extended forks and swingarm, 10" wheels cafe'd bars and a QA 50 seat,

[68Timber]

Originally Posted by screamin_c10

I always liked the blue 1st gen Z50s... good lookin little bikes...

CLick the link in my sig, we retro modded my old 79 Z50. Little thing sure surprises people when they see my big a$$ comin... LOL

125CC CDI ignition, Extended forks and swingarm, 10" wheels cafe'd bars and a QA 50 seat,

That's cool! I'd like to do a custom (but cheap) mini some day but it would definitely have to be on down the road. What kind of exhaust is that?

[mark 66]

cool little project. be careful those small bikes can be addicting.got a llttle ct 70 myself.keep it to terrorize the neighborhood

[68Timber]

Originally Posted by mark 66

cool little project. be careful those small bikes can be addicting.got a llttle ct 70 myself.keep it to terrorize the neighborhood

Thanks, and I've already been looking for another one.

I was waiting for the paint to fully harden before putting it back together, but the front forks were nagging at me. The upper fork bridge has two holes in it for tabs on the upper spring holders, so they won't spin in the forks I guess. Except the tabs on these upper spring holders had cracked off and left the party at some point, and it got to bugging me. And I didn't know how to take the forks apart, so I had to order a Clymer manual. So I'll get to clean these up and reassemble them with the new upper spring holders when they get here. Except now I'm thinking I can paint the and frame better if I don't have to mask anything? Scope creep, I guess, but it'll be nicer for the effort. I hope!

[Boog]

That's a good looking blue John. Chrome fenders? A new 40 year old mini is something you don't see everyday. What are you going to do with it when finished?
We used to use those and mini bikes as pit bikes at the drag races.

[aggie91]

Nice little bike.

My wife's Uncle has a few of the Honda Trail 70's. I might have to work on him to sell me one at a fair price for someting fun to tool around on..

[68Timber]

Thanks man. I ordered a clutch nut removal socket from the local Honda shop so I can check and make sure the clutch discs are in spec before I button it back up mount it in the frame again. If I could get just one weekend that I didn't have to go out of town for something I might could finish this thing.

[Boog]

The end is in sight now John. All you lack is finishin up. It sure looks like new.
Hmm. I wonder how one of those built into a mini chopper would work or a trike?

[68Timber]

Jim, actually I was thinking of a 80's or 90's model with motard tires, a pipe, and mini-apes. I'll have to find a good runner at a cheap price though.

[68Timber]

I let this sit a while but have been messing with it again lately. It might even run again. I cleaned and degreased the engine. The side covers are off, I used PB blaster-soaked-red scotchbrite pads on the engine to give it a reasonably even finish.

[made2drag]

Dang, it's coming right along. Nice fit with the tab....dead on...I wish i were closer, I could weld that up in 2 mins.

[dbstepside]

So this is your signature so I had to look. Did you ever get it done? And btw I love the Bahama Blue.

[68Timber]

No, I haven't finished it. And it doesn't look very good right now with eight months of shop dust on it. When this happened I hadn't started welding yet. I've since started welding some and I think I can weld that stop on. I'll get working on it shortly, I'm tired of stepping over it. LOL

[aggie91]

Did you see the one that was done at Gas Monkey for the show? It "sold" at an auction for $5200...after it was turned in to a trike...

[68Timber]

Originally Posted by aggie91

Did you see the one that was done at Gas Monkey for the show? It "sold" at an auction for $5200...after it was turned in to a trike...

That was cool. He put too much motor on it, but still. The green and the wheels, looked great.